alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
* kernel v3.4.x wrong pins /  hp z400
@ 2012-07-25 14:34 Florian Reitmeir
       [not found] ` <CAN8cciZD5dKbJ_mJqFysD=UTZmMerqjV5eDtU3PCszeZQ-npMQ@mail.gmail.com>
  0 siblings, 1 reply; 2+ messages in thread
From: Florian Reitmeir @ 2012-07-25 14:34 UTC (permalink / raw)
  To: alsa-devel

Hi,

i own an HP Z400 Workstation, and audio is not working as expected.

The Problem:

- if i mute the internal speaker, the sound for line out is also muted

- pulse audio, detects the internal speaker as master, so if if use the 
volume control in gnome 3, line-out gets muted, and the internal speaker 
is used

- to hear something on line-out i use alsamixer, and control the volume 
of the "speaker" output to 0

- but even if i set the output of speaker to 0, i can hear the music 
very very silent..

- and last .. the control of "line" does nothing, mute/volume does not 
affect the output

Here some hardware info, if you need more, please tell me.

Thanks.

greetings


 > uname -a
Linux schrank 3.4.3 #1 SMP PREEMPT Wed Jun 20 01:15:11 CEST 2012 x86_64 
GNU/Linux


 > lspci -v
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio 
Controller
         Subsystem: Hewlett-Packard Company Device 1309
         Flags: bus master, fast devsel, latency 0, IRQ 68
         Memory at f6000000 (64-bit, non-prefetchable) [size=16K]
         Capabilities: <access denied>
         Kernel driver in use: snd_hda_intel

 > cat /proc/asound/devices
   1:        : sequencer
   2: [ 0- 2]: digital audio capture
   3: [ 0- 0]: digital audio playback
   4: [ 0- 0]: digital audio capture
   5: [ 0- 0]: hardware dependent
   6: [ 0]   : control
   7: [ 1- 3]: digital audio playback
   8: [ 1- 0]: hardware dependent
   9: [ 1]   : control
  33:        : timer


 > cat /proc/asound/card0/codec\#0
Codec: Realtek ALC262
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0262
Subsystem Id: 0x103c1309
Revision Id: 0x100202
No Modem Function Group found
Default PCM:
     rates [0x560]: 44100 48000 96000 192000
     bits [0xe]: 16 20 24
     formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
   IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
   IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
   IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
   IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x11: Stereo
   Converter: stream=8, channel=0
   PCM:
     rates [0x560]: 44100 48000 96000 192000
     bits [0xe]: 16 20 24
     formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x11: Stereo
   Device: name="ALC262 Analog", type="Audio", device=0
   Converter: stream=8, channel=0
   PCM:
     rates [0x560]: 44100 48000 96000 192000
     bits [0xe]: 16 20 24
     formats [0x1]: PCM
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
   Converter: stream=0, channel=0
   Digital:
   Digital category: 0x0
   PCM:
     rates [0x560]: 44100 48000 96000 192000
     bits [0x1e]: 16 20 24 32
     formats [0x1]: PCM
Node 0x07 [Audio Input] wcaps 0x10011b: Stereo Amp-In
   Control: name="Capture Switch", index=0, device=0
   Control: name="Capture Volume", index=0, device=0
   Device: name="ALC262 Analog", type="Audio", device=0
   Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1
   Amp-In vals:  [0x1f 0x1f]
   Converter: stream=4, channel=0
   SDI-Select: 0
   PCM:
     rates [0x160]: 44100 48000 96000
     bits [0x6]: 16 20
     formats [0x1]: PCM
   Connection: 1
      0x24
Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
   Control: name="Capture Switch", index=1, device=0
   Control: name="Capture Volume", index=1, device=0
   Device: name="ALC262 Analog", type="Audio", device=2
   Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1
   Amp-In vals:  [0x00 0x00]
   Converter: stream=0, channel=0
   SDI-Select: 0
   PCM:
     rates [0x160]: 44100 48000 96000
     bits [0x6]: 16 20
     formats [0x1]: PCM
   Connection: 1
      0x23
Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
   Control: name="Capture Switch", index=2, device=0
   Control: name="Capture Volume", index=2, device=0
   Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1
   Amp-In vals:  [0x00 0x00]
   Converter: stream=0, channel=0
   SDI-Select: 0
   PCM:
     rates [0x160]: 44100 48000 96000
     bits [0x6]: 16 20
     formats [0x1]: PCM
   Connection: 1
      0x22
Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
   Converter: stream=0, channel=0
   SDI-Select: 0
   Digital:
   Digital category: 0x0
   PCM:
     rates [0x560]: 44100 48000 96000 192000
     bits [0x1e]: 16 20 24 32
     formats [0x1]: PCM
   Unsolicited: tag=00, enabled=0
   Connection: 1
      0x1f
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
   Control: name="Rear Mic Playback Volume", index=0, device=0
     ControlAmp: chs=3, dir=In, idx=0, ofs=0
   Control: name="Rear Mic Playback Switch", index=0, device=0
     ControlAmp: chs=3, dir=In, idx=0, ofs=0
   Control: name="Front Mic Playback Volume", index=0, device=0
     ControlAmp: chs=3, dir=In, idx=1, ofs=0
   Control: name="Front Mic Playback Switch", index=0, device=0
     ControlAmp: chs=3, dir=In, idx=1, ofs=0
   Control: name="Line Playback Volume", index=0, device=0
     ControlAmp: chs=3, dir=In, idx=2, ofs=0
   Control: name="Line Playback Switch", index=0, device=0
     ControlAmp: chs=3, dir=In, idx=2, ofs=0
   Control: name="Beep Playback Volume", index=0, device=0
     ControlAmp: chs=3, dir=In, idx=5, ofs=0
   Control: name="Beep Playback Switch", index=0, device=0
     ControlAmp: chs=3, dir=In, idx=5, ofs=0
   Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
   Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x1f 0x1f] [0x80 0x80] [0x80 
0x80] [0x9f 0x9f] [0x80 0x80] [0x80 0x80]
   Connection: 8
      0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15
Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
   Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
   Amp-In vals:  [0x00 0x00] [0x80 0x80]
   Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
   Amp-Out vals:  [0x01 0x01]
   Connection: 2
      0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
   Control: name="PCM Playback Volume", index=0, device=0
     ControlAmp: chs=3, dir=Out, idx=0, ofs=0
   Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
   Amp-In vals:  [0x00 0x00] [0x00 0x00]
   Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
   Amp-Out vals:  [0x1d 0x1d]
   Connection: 2
      0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010e: Mono Amp-In Amp-Out
   Control: name="Speaker Playback Volume", index=0, device=0
     ControlAmp: chs=1, dir=Out, idx=0, ofs=0
   Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
   Amp-In vals:  [0x00] [0x00]
   Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
   Amp-Out vals:  [0x00]
   Connection: 2
      0x02 0x0b
Node 0x0f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
   Pincap 0x00000020: IN
   Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
     Conn = 1/8, Color = Black
     DefAssociation = 0xf, Sequence = 0x0
     Misc = NO_PRESENCE
   Pin-ctls: 0x00:
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
   Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
   Amp-In vals:  [0x00 0x00]
   Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
   Amp-Out vals:  [0x80 0x80]
   Pincap 0x0000003e: IN OUT HP Detect Trigger
   Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
     Conn = 1/8, Color = Black
     DefAssociation = 0xf, Sequence = 0x0
     Misc = NO_PRESENCE
   Pin-ctls: 0x20: IN
   Unsolicited: tag=00, enabled=0
   Connection: 2
      0x0c* 0x0d
Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
   Control: name="PCM Playback Switch", index=0, device=0
     ControlAmp: chs=3, dir=Out, idx=0, ofs=0
   Control: name="Line Out Jack", index=0, device=0
   Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
   Amp-In vals:  [0x00 0x00]
   Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
   Amp-Out vals:  [0x80 0x80]
   Pincap 0x0000003e: IN OUT HP Detect Trigger
   Pin Default 0x01014c10: [Jack] Line Out at Ext Rear
     Conn = 1/8, Color = Green
     DefAssociation = 0x1, Sequence = 0x0
   Pin-ctls: 0x40: OUT
   Unsolicited: tag=02, enabled=1
   Connection: 2
      0x0c 0x0d*
Node 0x16 [Pin Complex] wcaps 0x40010c: Mono Amp-Out
   Control: name="Speaker Playback Switch", index=0, device=0
     ControlAmp: chs=1, dir=Out, idx=0, ofs=0
   Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
   Amp-Out vals:  [0x80]
   Pincap 0x00000010: OUT
   Pin Default 0x99030120: [Fixed] Line Out at Int ATAPI
     Conn = ATAPI, Color = Unknown
     DefAssociation = 0x2, Sequence = 0x0
     Misc = NO_PRESENCE
   Pin-ctls: 0x40: OUT
   Connection: 1
      0x0e
Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
   Control: name="Rear Mic Boost Volume", index=0, device=0
     ControlAmp: chs=3, dir=In, idx=0, ofs=0
   Control: name="Rear Mic Jack", index=0, device=0
   Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
   Amp-In vals:  [0x00 0x00]
   Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
   Amp-Out vals:  [0x80 0x80]
   Pincap 0x0000173e: IN OUT HP Detect Trigger
     Vref caps: HIZ 50 GRD 80
   Pin Default 0x01a19c30: [Jack] Mic at Ext Rear
     Conn = 1/8, Color = Pink
     DefAssociation = 0x3, Sequence = 0x0
   Pin-ctls: 0x21: IN VREF_50
   Unsolicited: tag=03, enabled=1
   Connection: 2
      0x0c* 0x0d
Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
   Control: name="Front Mic Boost Volume", index=0, device=0
     ControlAmp: chs=3, dir=In, idx=0, ofs=0
   Control: name="Front Mic Jack", index=0, device=0
   Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
   Amp-In vals:  [0x00 0x00]
   Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
   Amp-Out vals:  [0x80 0x80]
   Pincap 0x0000173e: IN OUT HP Detect Trigger
     Vref caps: HIZ 50 GRD 80
   Pin Default 0x02a11c31: [Jack] Mic at Ext Front
     Conn = 1/8, Color = Black
     DefAssociation = 0x3, Sequence = 0x1
   Pin-ctls: 0x24: IN VREF_80
   Unsolicited: tag=04, enabled=1
   Connection: 2
      0x0c* 0x0d
Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
   Control: name="Line Jack", index=0, device=0
   Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
   Amp-In vals:  [0x00 0x00]
   Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
   Amp-Out vals:  [0x80 0x80]
   Pincap 0x0000173e: IN OUT HP Detect Trigger
     Vref caps: HIZ 50 GRD 80
   Pin Default 0x01813c3f: [Jack] Line In at Ext Rear
     Conn = 1/8, Color = Blue
     DefAssociation = 0x3, Sequence = 0xf
   Pin-ctls: 0x20: IN VREF_HIZ
   Unsolicited: tag=05, enabled=1
   Connection: 2
      0x0c* 0x0d
Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
   Control: name="Headphone Playback Switch", index=0, device=0
     ControlAmp: chs=3, dir=Out, idx=0, ofs=0
   Control: name="Front Headphone Jack", index=0, device=0
   Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
   Amp-In vals:  [0x00 0x00]
   Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
   Amp-Out vals:  [0x80 0x80]
   Pincap 0x0000173e: IN OUT HP Detect Trigger
     Vref caps: HIZ 50 GRD 80
   Pin Default 0x02211c40: [Jack] HP Out at Ext Front
     Conn = 1/8, Color = Black
     DefAssociation = 0x4, Sequence = 0x0
   Pin-ctls: 0xc0: OUT HP VREF_HIZ
   Unsolicited: tag=01, enabled=1
   Connection: 2
      0x0c 0x0d*
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
   Pincap 0x00000020: IN
   Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
     Conn = 1/8, Color = Black
     DefAssociation = 0xf, Sequence = 0x0
     Misc = NO_PRESENCE
   Pin-ctls: 0x20: IN
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
   Pincap 0x00000020: IN
   Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
     Conn = 1/8, Color = Black
     DefAssociation = 0xf, Sequence = 0x0
     Misc = NO_PRESENCE
   Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400380: Mono Digital
   Pincap 0x00000010: OUT
   Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
     Conn = 1/8, Color = Black
     DefAssociation = 0xf, Sequence = 0x0
     Misc = NO_PRESENCE
   Pin-ctls: 0x40: OUT
   Unsolicited: tag=00, enabled=0
   Connection: 1
      0x06
Node 0x1f [Pin Complex] wcaps 0x400280: Mono Digital
   Pincap 0x00000020: IN
   Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
     Conn = 1/8, Color = Black
     DefAssociation = 0xf, Sequence = 0x0
     Misc = NO_PRESENCE
   Pin-ctls: 0x20: IN
   Unsolicited: tag=00, enabled=0
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
   Processing caps: benign=0, ncoeff=17
Node 0x21 [Volume Knob Widget] wcaps 0x600080: Mono
   Volume-Knob: delta=0, steps=32, direct=0, val=64
   Unsolicited: tag=00, enabled=0
   Connection: 0
Node 0x22 [Audio Selector] wcaps 0x300101: Stereo
   Control: name="Input Source", index=2, device=0
   Connection: 10
      0x18* 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x0b 0x12
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
   Control: name="Input Source", index=1, device=0
   Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
   Amp-In vals:  [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 
0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
   Connection: 9
      0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x0b
Node 0x24 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
   Control: name="Input Source", index=0, device=0
   Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
   Amp-In vals:  [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 
0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
   Connection: 9
      0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x0b




-- 
Florian Reitmeir
E-Mail: florian@reitmeir.org
Tel: +43 650 2661660

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: kernel v3.4.x wrong pins / hp z400
       [not found]   ` <CAN8cciZgG-aXemJRZon+scAaXLysx0a1Uubpv2E2Q9Fc8P_EgQ@mail.gmail.com>
@ 2012-07-29  1:56     ` Raymond Yau
  0 siblings, 0 replies; 2+ messages in thread
From: Raymond Yau @ 2012-07-29  1:56 UTC (permalink / raw)
  To: florian, alsa-devel, pulseaudio-discuss

2012-7-27 下午4:40 於 "Florian Reitmeir" <florian@reitmeir.org> 寫道
>
> i own an HP Z400 Workstation, and audio is not working as expected.
>
> The Problem:
>
> - if i mute the internal speaker, the sound for line out is also muted
>

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01716874&lang=en&cc=us&taskId=101&prodSeriesId=3718663&prodTypeId=12454

The internal speaker will be disabled if multi-streaming audio is enabled.

Refer to alc262 specification

Two stereo DACs support 16/20/24-bit PCM format for stereo audio playback
on the rear panel, plus 2 channels of independent stereo sound output
(multiple streaming) through the Front-Out-Left and Front-Out-Right
channels

Supports MONO line output with independent volume control

> - pulse audio, detects the internal speaker as master, so if if use the
volume control in gnome 3, line-out gets muted, and the internal speaker is
used

the auto parser of hda codec does not differentitate those internal chassis
mono speaker of the desktop (cfg->mono_out_pin) from those speaker of
laptop (cfg->speaker_outs)

this also cause some lenovo workstation with ad1988 codec fail as the
driver try to assign the fifth dac to the mono speaker instead of the
headphone.

>
> - to hear something on line-out i use alsamixer, and control the volume
of the "speaker" output to 0
>
> - but even if i set the output of speaker to 0, i can hear the music very
very silent..
>
> - and last .. the control of "line" does nothing, mute/volume does not
affect the output

a possible way is use node 0x02 for line out and mono speaker , node 0x03
for the headphone.

front playback volume use node 0x0c 's amp-out
headphone playback volume use node 0x0d 's amp-out
mono speaker volume use node 0x0e 's amp-out

the mono speaker playback switch cannot be the slave of virtual master.

the mono speaker should be muted when either line out or headphone is
plugged.

>
> Here some hardware info, if you need more, please tell me.
>

> > cat /proc/asound/card0/codec\#0
> Codec: Realtek ALC262
> Address: 0
> AFG Function Id: 0x1 (unsol 1)
> Vendor Id: 0x10ec0262
> Subsystem Id: 0x103c1309
> Revision Id: 0x100202
> No Modem Function Group found
> Default PCM:
>     rates [0x560]: 44100 48000 96000 192000
>     bits [0xe]: 16 20 24
>     formats [0x1]: PCM
> Default Amp-In caps: N/A
> Default Amp-Out caps: N/A
> GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
>   IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
>   IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
>   IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
>   IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
> Node 0x02 [Audio Output] wcaps 0x11: Stereo
>   Converter: stream=8, channel=0
>   PCM:
>     rates [0x560]: 44100 48000 96000 192000
>     bits [0xe]: 16 20 24
>     formats [0x1]: PCM
> Node 0x03 [Audio Output] wcaps 0x11: Stereo
>   Device: name="ALC262 Analog", type="Audio", device=0
>   Converter: stream=8, channel=0
>   PCM:
>     rates [0x560]: 44100 48000 96000 192000
>     bits [0xe]: 16 20 24
>     formats [0x1]: PCM

> Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
>   Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
>   Amp-In vals:  [0x00 0x00] [0x80 0x80]
>   Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
>   Amp-Out vals:  [0x01 0x01]
>   Connection: 2
>      0x02 0x0b
> Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
>   Control: name="PCM Playback Volume", index=0, device=0
>     ControlAmp: chs=3, dir=Out, idx=0, ofs=0
>   Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
>   Amp-In vals:  [0x00 0x00] [0x00 0x00]
>   Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
>   Amp-Out vals:  [0x1d 0x1d]
>   Connection: 2
>      0x03 0x0b
> Node 0x0e [Audio Mixer] wcaps 0x20010e: Mono Amp-In Amp-Out
>   Control: name="Speaker Playback Volume", index=0, device=0
>     ControlAmp: chs=1, dir=Out, idx=0, ofs=0
>   Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
>   Amp-In vals:  [0x00] [0x00]
>   Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
>   Amp-Out vals:  [0x00]
>   Connection: 2
>      0x02 0x0b

> Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
>   Control: name="PCM Playback Switch", index=0, device=0
>     ControlAmp: chs=3, dir=Out, idx=0, ofs=0
>   Control: name="Line Out Jack", index=0, device=0
>   Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
>   Amp-In vals:  [0x00 0x00]
>   Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
>   Amp-Out vals:  [0x80 0x80]
>   Pincap 0x0000003e: IN OUT HP Detect Trigger
>   Pin Default 0x01014c10: [Jack] Line Out at Ext Rear
>     Conn = 1/8, Color = Green
>     DefAssociation = 0x1, Sequence = 0x0
>   Pin-ctls: 0x40: OUT
>   Unsolicited: tag=02, enabled=1
>   Connection: 2
>      0x0c 0x0d*
> Node 0x16 [Pin Complex] wcaps 0x40010c: Mono Amp-Out
>   Control: name="Speaker Playback Switch", index=0, device=0
>     ControlAmp: chs=1, dir=Out, idx=0, ofs=0
>   Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
>   Amp-Out vals:  [0x80]
>   Pincap 0x00000010: OUT
>   Pin Default 0x99030120: [Fixed] Line Out at Int ATAPI
>     Conn = ATAPI, Color = Unknown
>     DefAssociation = 0x2, Sequence = 0x0
>     Misc = NO_PRESENCE
>   Pin-ctls: 0x40: OUT
>   Connection: 1
>      0x0e

> Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
>   Control: name="Headphone Playback Switch", index=0, device=0
>     ControlAmp: chs=3, dir=Out, idx=0, ofs=0
>   Control: name="Front Headphone Jack", index=0, device=0
>   Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
>   Amp-In vals:  [0x00 0x00]
>   Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
>   Amp-Out vals:  [0x80 0x80]
>   Pincap 0x0000173e: IN OUT HP Detect Trigger
>     Vref caps: HIZ 50 GRD 80
>   Pin Default 0x02211c40: [Jack] HP Out at Ext Front
>     Conn = 1/8, Color = Black
>     DefAssociation = 0x4, Sequence = 0x0
>   Pin-ctls: 0xc0: OUT HP VREF_HIZ
>   Unsolicited: tag=01, enabled=1
>   Connection: 2
>      0x0c 0x0d*
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2012-07-29  1:56 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-07-25 14:34 kernel v3.4.x wrong pins / hp z400 Florian Reitmeir
     [not found] ` <CAN8cciZD5dKbJ_mJqFysD=UTZmMerqjV5eDtU3PCszeZQ-npMQ@mail.gmail.com>
     [not found]   ` <CAN8cciZgG-aXemJRZon+scAaXLysx0a1Uubpv2E2Q9Fc8P_EgQ@mail.gmail.com>
2012-07-29  1:56     ` Raymond Yau

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).