From: Mark Brown <broonie@kernel.org>
To: Jeeja KP <jeeja.kp@intel.com>, Vinod Koul <vinod.koul@intel.com>,
Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org
Subject: Applied "ASoC: Intel: Skylake: Reconfigure HDA stream register in prepare/resume" to the asoc tree
Date: Wed, 25 Nov 2015 17:57:43 +0000 [thread overview]
Message-ID: <E1a1eK7-0006ZK-A0@debutante> (raw)
In-Reply-To: <1448297789-6524-3-git-send-email-vinod.koul@intel.com>
The patch
ASoC: Intel: Skylake: Reconfigure HDA stream register in prepare/resume
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 7e3a17d311ca89a74cfd39e02e96d29d92849d34 Mon Sep 17 00:00:00 2001
From: Jeeja KP <jeeja.kp@intel.com>
Date: Mon, 23 Nov 2015 22:26:24 +0530
Subject: [PATCH] ASoC: Intel: Skylake: Reconfigure HDA stream register in
prepare/resume
PCM prepare callbacks can be called multiple times. During S3
the stream registers will be reset when Controller is reset.
When stream is resumed, these stream registers needs to reconfigured.
This patch removes the check in prepare callback() if stream already
prepared, which will allow reconfiguring of stream registers and also
decouple stream when stream is resumed to route audio via DSP.
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
sound/soc/intel/skylake/skl-pcm.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c
index dae332beea3f..3c891d78ba58 100644
--- a/sound/soc/intel/skylake/skl-pcm.c
+++ b/sound/soc/intel/skylake/skl-pcm.c
@@ -181,10 +181,6 @@ static int skl_pcm_prepare(struct snd_pcm_substream *substream,
int err;
dev_dbg(dai->dev, "%s: %s\n", __func__, dai->name);
- if (hdac_stream(stream)->prepared) {
- dev_dbg(dai->dev, "already stream is prepared - returning\n");
- return 0;
- }
format_val = skl_get_format(substream, dai);
dev_dbg(dai->dev, "stream_tag=%d formatvalue=%d\n",
@@ -342,6 +338,8 @@ static int skl_pcm_trigger(struct snd_pcm_substream *substream, int cmd,
struct skl *skl = get_skl_ctx(dai->dev);
struct skl_sst *ctx = skl->skl_sst;
struct skl_module_cfg *mconfig;
+ struct hdac_ext_bus *ebus = get_bus_ctx(substream);
+ struct hdac_ext_stream *stream = get_hdac_ext_stream(substream);
int ret;
mconfig = skl_tplg_fe_get_cpr_module(dai, substream->stream);
@@ -349,15 +347,17 @@ static int skl_pcm_trigger(struct snd_pcm_substream *substream, int cmd,
return -EIO;
switch (cmd) {
+ case SNDRV_PCM_TRIGGER_RESUME:
+ skl_pcm_prepare(substream, dai);
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- case SNDRV_PCM_TRIGGER_RESUME:
/*
* Start HOST DMA and Start FE Pipe.This is to make sure that
* there are no underrun/overrun in the case when the FE
* pipeline is started but there is a delay in starting the
* DMA channel on the host.
*/
+ snd_hdac_ext_stream_decouple(ebus, stream, true);
ret = skl_decoupled_trigger(substream, cmd);
if (ret < 0)
return ret;
@@ -377,6 +377,8 @@ static int skl_pcm_trigger(struct snd_pcm_substream *substream, int cmd,
return ret;
ret = skl_decoupled_trigger(substream, cmd);
+ if (cmd == SNDRV_PCM_TRIGGER_SUSPEND)
+ snd_hdac_ext_stream_decouple(ebus, stream, false);
break;
default:
--
2.6.2
next prev parent reply other threads:[~2015-11-25 17:57 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-23 16:56 [PATCH 0/7] ASoC: Intel: Skylake: Fix suspend issues Vinod Koul
2015-11-23 16:56 ` [PATCH 1/7] ASoC: Intel: Skylake: Add Resume capability in PCM info Vinod Koul
2015-11-23 18:45 ` Takashi Iwai
2015-11-24 2:44 ` Vinod Koul
2015-11-24 6:07 ` Takashi Iwai
2015-11-26 8:56 ` Vinod Koul
2015-11-26 9:06 ` Takashi Iwai
2016-01-10 12:22 ` Applied "ASoC: Intel: Skylake: Add Resume capability in PCM info." to the asoc tree Mark Brown
2015-11-23 16:56 ` [PATCH 2/7] ASoC: Intel: Skylake: Reconfigure HDA stream register in prepare/resume Vinod Koul
2015-11-25 17:57 ` Mark Brown [this message]
2015-11-23 16:56 ` [PATCH 3/7] ASoC: Intel: Skylake: Fix to update bit depth for module params Vinod Koul
2015-11-25 17:57 ` Applied "ASoC: Intel: Skylake: Fix to update bit depth for module params" to the asoc tree Mark Brown
2015-11-23 16:56 ` [PATCH 4/7] ASoC: Intel: Skylake: Update pcm capability Vinod Koul
2015-11-25 17:57 ` Applied "ASoC: Intel: Skylake: Update pcm capability" to the asoc tree Mark Brown
2015-11-23 16:56 ` [PATCH 5/7] ASoC: Intel: Skylake: Poll CLDMA RUN bit when set Vinod Koul
2015-11-25 17:57 ` Applied "ASoC: Intel: Skylake: Poll CLDMA RUN bit when set" to the asoc tree Mark Brown
2015-11-23 16:56 ` [PATCH 6/7] ASoC: Intel: Skylake: Clear stream registers before setting up stream Vinod Koul
2015-11-23 16:56 ` [PATCH 7/7] ASoC: Intel: Skylake: Move up pipe mem free Vinod Koul
2015-11-25 17:57 ` Applied "ASoC: Intel: Skylake: Move up pipe mem free" to the asoc tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1a1eK7-0006ZK-A0@debutante \
--to=broonie@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=jeeja.kp@intel.com \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox