From: Mark Brown <broonie@kernel.org>
To: "Subhransu S. Prusty" <subhransu.s.prusty@intel.com>,
Vinod Koul <vinod.koul@intel.com>,
Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org
Subject: Applied "ASoC: hdac_hdmi: create dais based on number of cvts" to the asoc tree
Date: Mon, 15 Feb 2016 20:58:51 +0000 [thread overview]
Message-ID: <E1aVQEN-0007up-WC@finisterre> (raw)
In-Reply-To: <1454161428-7896-5-git-send-email-subhransu.s.prusty@intel.com>
The patch
ASoC: hdac_hdmi: create dais based on number of cvts
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 17a42c4500b05a6af4c32eb8e9cfc44bab945d1f Mon Sep 17 00:00:00 2001
From: "Subhransu S. Prusty" <subhransu.s.prusty@intel.com>
Date: Fri, 12 Feb 2016 07:46:04 +0530
Subject: [PATCH] ASoC: hdac_hdmi: create dais based on number of cvts
After enabling all pins/cvts, Skylake HDMI codec enumerates 3
converters. Three independent streams can be supported with 3
cvts. This patch removes the static dai creation and creates dais
based on the number of cvts queried.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
sound/soc/codecs/hdac_hdmi.c | 123 ++++++++++++++++++++++++++++++++-----------
1 file changed, 91 insertions(+), 32 deletions(-)
diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c
index b2e5e54..c85deae 100644
--- a/sound/soc/codecs/hdac_hdmi.c
+++ b/sound/soc/codecs/hdac_hdmi.c
@@ -30,6 +30,8 @@
#include <sound/pcm_drm_eld.h>
#include "../../hda/local.h"
+#define NAME_SIZE 32
+
#define AMP_OUT_MUTE 0xb080
#define AMP_OUT_UNMUTE 0xb000
#define PIN_OUT (AC_PINCTL_OUT_EN)
@@ -669,11 +671,82 @@ static void hdac_hdmi_skl_enable_dp12(struct hdac_device *hdac)
}
+static struct snd_soc_dai_ops hdmi_dai_ops = {
+ .startup = hdac_hdmi_pcm_open,
+ .shutdown = hdac_hdmi_pcm_close,
+ .hw_params = hdac_hdmi_set_hw_params,
+ .prepare = hdac_hdmi_playback_prepare,
+ .hw_free = hdac_hdmi_playback_cleanup,
+};
+
+/*
+ * Each converter can support a stream independently. So a dai is created
+ * based on the number of converter queried.
+ */
+static int hdac_hdmi_create_dais(struct hdac_device *hdac,
+ struct snd_soc_dai_driver **dais,
+ struct hdac_hdmi_priv *hdmi, int num_dais)
+{
+ struct snd_soc_dai_driver *hdmi_dais;
+ struct hdac_hdmi_cvt *cvt;
+ char name[NAME_SIZE], dai_name[NAME_SIZE];
+ int i = 0;
+ u32 rates, bps;
+ unsigned int rate_max = 384000, rate_min = 8000;
+ u64 formats;
+ int ret;
+
+ hdmi_dais = devm_kzalloc(&hdac->dev,
+ (sizeof(*hdmi_dais) * num_dais),
+ GFP_KERNEL);
+ if (!hdmi_dais)
+ return -ENOMEM;
+
+ list_for_each_entry(cvt, &hdmi->cvt_list, head) {
+ ret = snd_hdac_query_supported_pcm(hdac, cvt->nid,
+ &rates, &formats, &bps);
+ if (ret)
+ return ret;
+
+ sprintf(dai_name, "intel-hdmi-hifi%d", i+1);
+ hdmi_dais[i].name = devm_kstrdup(&hdac->dev,
+ dai_name, GFP_KERNEL);
+
+ if (!hdmi_dais[i].name)
+ return -ENOMEM;
+
+ snprintf(name, sizeof(name), "hifi%d", i+1);
+ hdmi_dais[i].playback.stream_name =
+ devm_kstrdup(&hdac->dev, name, GFP_KERNEL);
+ if (!hdmi_dais[i].playback.stream_name)
+ return -ENOMEM;
+
+ /*
+ * Set caps based on capability queried from the converter.
+ * It will be constrained runtime based on ELD queried.
+ */
+ hdmi_dais[i].playback.formats = formats;
+ hdmi_dais[i].playback.rates = rates;
+ hdmi_dais[i].playback.rate_max = rate_max;
+ hdmi_dais[i].playback.rate_min = rate_min;
+ hdmi_dais[i].playback.channels_min = 2;
+ hdmi_dais[i].playback.channels_max = 2;
+ hdmi_dais[i].ops = &hdmi_dai_ops;
+
+ i++;
+ }
+
+ *dais = hdmi_dais;
+
+ return 0;
+}
+
/*
* Parse all nodes and store the cvt/pin nids in array
* Add one time initialization for pin and cvt widgets
*/
-static int hdac_hdmi_parse_and_map_nid(struct hdac_ext_device *edev)
+static int hdac_hdmi_parse_and_map_nid(struct hdac_ext_device *edev,
+ struct snd_soc_dai_driver **dais, int *num_dais)
{
hda_nid_t nid;
int i, num_nodes;
@@ -724,6 +797,15 @@ static int hdac_hdmi_parse_and_map_nid(struct hdac_ext_device *edev)
if (!hdmi->num_pin || !hdmi->num_cvt)
return -EIO;
+ ret = hdac_hdmi_create_dais(hdac, dais, hdmi, hdmi->num_cvt);
+ if (ret) {
+ dev_err(&hdac->dev, "Failed to create dais with err: %d\n",
+ ret);
+ return ret;
+ }
+
+ *num_dais = hdmi->num_cvt;
+
return hdac_hdmi_init_dai_map(edev);
}
@@ -814,38 +896,12 @@ static struct snd_soc_codec_driver hdmi_hda_codec = {
.idle_bias_off = true,
};
-static struct snd_soc_dai_ops hdmi_dai_ops = {
- .startup = hdac_hdmi_pcm_open,
- .shutdown = hdac_hdmi_pcm_close,
- .hw_params = hdac_hdmi_set_hw_params,
- .prepare = hdac_hdmi_playback_prepare,
- .hw_free = hdac_hdmi_playback_cleanup,
-};
-
-static struct snd_soc_dai_driver hdmi_dais[] = {
- { .name = "intel-hdmi-hif1",
- .playback = {
- .stream_name = "hif1",
- .channels_min = 2,
- .channels_max = 2,
- .rates = SNDRV_PCM_RATE_32000 |
- SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
- SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 |
- SNDRV_PCM_RATE_176400 | SNDRV_PCM_RATE_192000,
- .formats = SNDRV_PCM_FMTBIT_S16_LE |
- SNDRV_PCM_FMTBIT_S20_3LE |
- SNDRV_PCM_FMTBIT_S24_LE |
- SNDRV_PCM_FMTBIT_S32_LE,
-
- },
- .ops = &hdmi_dai_ops,
- },
-};
-
static int hdac_hdmi_dev_probe(struct hdac_ext_device *edev)
{
struct hdac_device *codec = &edev->hdac;
struct hdac_hdmi_priv *hdmi_priv;
+ struct snd_soc_dai_driver *hdmi_dais = NULL;
+ int num_dais = 0;
int ret = 0;
hdmi_priv = devm_kzalloc(&codec->dev, sizeof(*hdmi_priv), GFP_KERNEL);
@@ -859,13 +915,16 @@ static int hdac_hdmi_dev_probe(struct hdac_ext_device *edev)
INIT_LIST_HEAD(&hdmi_priv->pin_list);
INIT_LIST_HEAD(&hdmi_priv->cvt_list);
- ret = hdac_hdmi_parse_and_map_nid(edev);
- if (ret < 0)
+ ret = hdac_hdmi_parse_and_map_nid(edev, &hdmi_dais, &num_dais);
+ if (ret < 0) {
+ dev_err(&codec->dev,
+ "Failed in parse and map nid with err: %d\n", ret);
return ret;
+ }
/* ASoC specific initialization */
return snd_soc_register_codec(&codec->dev, &hdmi_hda_codec,
- hdmi_dais, ARRAY_SIZE(hdmi_dais));
+ hdmi_dais, num_dais);
}
static int hdac_hdmi_dev_remove(struct hdac_ext_device *edev)
--
2.7.0
next prev parent reply other threads:[~2016-02-15 20:59 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-30 13:43 [PATCH v5 00/14] ASoC: hdac_hdmi: Add DP & notification support Subhransu S. Prusty
2016-01-30 13:43 ` [PATCH v5 01/14] ASoC: hdac_hdmi: Add hotplug notification and read eld Subhransu S. Prusty
2016-02-09 19:42 ` Mark Brown
2016-02-10 4:33 ` Vinod Koul
2016-02-10 7:23 ` Mark Brown
2016-02-10 8:22 ` Vinod Koul
2016-01-30 13:43 ` [PATCH v5 02/14] ASoC: hdac_hdmi: Apply constraints based on ELD Subhransu S. Prusty
2016-01-30 13:43 ` [PATCH v5 03/14] ASoC: hdac_hdmi: Enable DP1.2 and all converters/pins Subhransu S. Prusty
2016-01-30 13:43 ` [PATCH v5 04/14] ASoC: hdac_hdmi: create dais based on number of cvts Subhransu S. Prusty
2016-02-15 20:58 ` Mark Brown [this message]
2016-01-30 13:43 ` [PATCH v5 05/14] ASoC: hdac_hdmi: Create widget/route based on nodes enumerated Subhransu S. Prusty
2016-02-15 20:58 ` Applied "ASoC: hdac_hdmi: Create widget/route based on nodes enumerated" to the asoc tree Mark Brown
2016-01-30 13:43 ` [PATCH v5 06/14] ASoC: hdac_hdmi: Add jack reporting Subhransu S. Prusty
2016-01-30 13:43 ` [PATCH v5 07/14] ASoC: hdac_hdmi: Enable playback on all enumerated ports Subhransu S. Prusty
2016-01-30 13:43 ` [PATCH v5 08/14] drm/edid: Add API to help find connection type Subhransu S. Prusty
2016-01-30 13:43 ` [PATCH v5 09/14] ASoC: hdac_hdmi: Add infoframe support for dp audio Subhransu S. Prusty
2016-02-15 20:58 ` Applied "ASoC: hdac_hdmi: Add infoframe support for dp audio" to the asoc tree Mark Brown
2016-01-30 13:43 ` [PATCH v5 10/14] ASoC: hdac_hdmi: Fix possible memory leak in hw_params Subhransu S. Prusty
2016-01-30 13:43 ` [PATCH v5 11/14] ASoC: hdac_hdmi: Don't fail in dai startup to make userland happy Subhransu S. Prusty
2016-02-05 2:27 ` Patel, Vedang
2016-02-05 3:52 ` Subhransu S. Prusty
2016-01-30 13:43 ` [PATCH v5 12/14] ASoC: hdac_hdmi: Add PM support Subhransu S. Prusty
2016-01-30 13:43 ` [PATCH v5 13/14] ASoC: hdac_hdmi: Fix to keep codec power active during enumeration Subhransu S. Prusty
2016-02-20 17:15 ` Applied "ASoC: hdac_hdmi: Fix to keep codec power active during enumeration." to the asoc tree Mark Brown
2016-01-30 13:43 ` [PATCH v5 14/14] ASoC: hdac_hdmi: Fix to reconfigure registers in runtime resume Subhransu S. Prusty
2016-02-20 17:15 ` Applied "ASoC: hdac_hdmi: Fix to reconfigure registers in runtime resume" to the asoc tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1aVQEN-0007up-WC@finisterre \
--to=broonie@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=subhransu.s.prusty@intel.com \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox