Applied "ASoC: Intel: bytcr_rt5640: fix dai/clock setup for SSP0 routing" to the asoc tree

[Mark Brown <broonie@kernel.org>]

The patch

   ASoC: Intel: bytcr_rt5640: fix dai/clock setup for SSP0 routing

has been applied to the asoc tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 038a50e735c85a7a9fbcda090785a588443ffa26 Mon Sep 17 00:00:00 2001
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Date: Fri, 12 Aug 2016 16:27:52 -0500
Subject: [PATCH] ASoC: Intel: bytcr_rt5640: fix dai/clock setup for SSP0
 routing

SSP0 uses 16 bits 2ch, SSP2 24 bits 2ch

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 92 ++++++++++++++++++++++++-----------
 1 file changed, 64 insertions(+), 28 deletions(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 4337b5e85921..42c7bd20f54d 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -138,8 +138,6 @@ static int byt_rt5640_aif1_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_dai *codec_dai = rtd->codec_dai;
 	int ret;
 
-	snd_soc_dai_set_bclk_ratio(codec_dai, 50);
-
 	ret = snd_soc_dai_set_sysclk(codec_dai, RT5640_SCLK_S_PLL1,
 				     params_rate(params) * 512,
 				     SND_SOC_CLOCK_IN);
@@ -148,9 +146,18 @@ static int byt_rt5640_aif1_hw_params(struct snd_pcm_substream *substream,
 		return ret;
 	}
 
-	ret = snd_soc_dai_set_pll(codec_dai, 0, RT5640_PLL1_S_BCLK1,
-				  params_rate(params) * 50,
-				  params_rate(params) * 512);
+	if ((byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) ||
+		(byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2)) {
+
+		ret = snd_soc_dai_set_pll(codec_dai, 0, RT5640_PLL1_S_BCLK1,
+					params_rate(params) * 32, /* FIXME */
+					params_rate(params) * 512);
+	} else {
+		ret = snd_soc_dai_set_pll(codec_dai, 0, RT5640_PLL1_S_BCLK1,
+					params_rate(params) * 50,
+					params_rate(params) * 512);
+	}
+
 	if (ret < 0) {
 		dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
 		return ret;
@@ -311,34 +318,63 @@ static int byt_rt5640_codec_fixup(struct snd_soc_pcm_runtime *rtd,
 						SNDRV_PCM_HW_PARAM_CHANNELS);
 	int ret;
 
-	/* The DSP will covert the FE rate to 48k, stereo, 24bits */
+	/* The DSP will covert the FE rate to 48k, stereo */
 	rate->min = rate->max = 48000;
 	channels->min = channels->max = 2;
 
-	/* set SSP2 to 24-bit */
-	params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
-
-	/*
-	 * Default mode for SSP configuration is TDM 4 slot, override config
-	 * with explicit setting to I2S 2ch 24-bit. The word length is set with
-	 * dai_set_tdm_slot() since there is no other API exposed
-	 */
-	ret = snd_soc_dai_set_fmt(rtd->cpu_dai,
-				  SND_SOC_DAIFMT_I2S     |
-				  SND_SOC_DAIFMT_NB_IF   |
-				  SND_SOC_DAIFMT_CBS_CFS
-				  );
-	if (ret < 0) {
-		dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret);
-		return ret;
-	}
+	if ((byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) ||
+		(byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2)) {
+
+		/* set SSP2 to 16-bit */
+		params_set_format(params, SNDRV_PCM_FORMAT_S16_LE);
+
+		/*
+		 * Default mode for SSP configuration is TDM 4 slot, override config
+		 * with explicit setting to I2S 2ch 16-bit. The word length is set with
+		 * dai_set_tdm_slot() since there is no other API exposed
+		 */
+		ret = snd_soc_dai_set_fmt(rtd->cpu_dai,
+					SND_SOC_DAIFMT_I2S     |
+					SND_SOC_DAIFMT_NB_IF   |
+					SND_SOC_DAIFMT_CBS_CFS
+			);
+		if (ret < 0) {
+			dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret);
+			return ret;
+		}
 
-	ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, 24);
-	if (ret < 0) {
-		dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
-		return ret;
-	}
+		ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, 16);
+		if (ret < 0) {
+			dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
+			return ret;
+		}
+
+	} else {
 
+		/* set SSP2 to 24-bit */
+		params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
+
+		/*
+		 * Default mode for SSP configuration is TDM 4 slot, override config
+		 * with explicit setting to I2S 2ch 24-bit. The word length is set with
+		 * dai_set_tdm_slot() since there is no other API exposed
+		 */
+		ret = snd_soc_dai_set_fmt(rtd->cpu_dai,
+					SND_SOC_DAIFMT_I2S     |
+					SND_SOC_DAIFMT_NB_IF   |
+					SND_SOC_DAIFMT_CBS_CFS
+			);
+		if (ret < 0) {
+			dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret);
+			return ret;
+		}
+
+		ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, 24);
+		if (ret < 0) {
+			dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
+			return ret;
+		}
+	}
 	return 0;
 }
 
-- 
2.8.1