From: Mark Brown <broonie@kernel.org>
To: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Mark Brown <broonie@kernel.org>Mark Brown <broonie@kernel.org>,
Linux-Renesas <linux-renesas-soc@vger.kernel.org>,
Linux-ALSA <alsa-devel@alsa-project.org>,
Simon <horms@verge.net.au>,
Geert Uytterhoeven
<geert@linux-m68k.org>alsa-devel@alsa-project.org
Subject: Applied "ASoC: rsnd: move "renesas,rsrc-card" to "simple-scu-audio-card" on Document" to the asoc tree
Date: Wed, 17 May 2017 10:52:38 +0100 [thread overview]
Message-ID: <E1dAvdG-0006ut-Tt@debutante> (raw)
In-Reply-To: <874lxbsyaz.wl%kuninori.morimoto.gx@renesas.com>
The patch
ASoC: rsnd: move "renesas,rsrc-card" to "simple-scu-audio-card" on Document
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 0378bb966765e06fdb0e00d592a6fcfbb71afa3c Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Wed, 26 Apr 2017 02:26:30 +0000
Subject: [PATCH] ASoC: rsnd: move "renesas,rsrc-card" to
"simple-scu-audio-card" on Document
"renesas,rsrc-card" is exchanged to "simple-scu-card".
Let's update Document
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
.../devicetree/bindings/sound/renesas,rsnd.txt | 30 +++++++++++-----------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
index 15a7316e4c91..3332910a9a11 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
@@ -83,11 +83,11 @@ SRC can convert [xx]Hz to [yy]Hz. Then, it has below 2 modes
** Asynchronous mode
------------------
-You need to use "renesas,rsrc-card" sound card for it.
+You need to use "simple-scu-audio-card" sound card for it.
example)
sound {
- compatible = "renesas,rsrc-card";
+ compatible = "simple-scu-audio-card";
...
/*
* SRC Asynchronous mode setting
@@ -97,12 +97,12 @@ example)
* Inputed 48kHz data will be converted to
* system specified Hz
*/
- convert-rate = <48000>;
+ simple-audio-card,convert-rate = <48000>;
...
- cpu {
+ simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
};
- codec {
+ simple-audio-card,codec {
...
};
};
@@ -141,23 +141,23 @@ For more detail information, see below
${LINUX}/sound/soc/sh/rcar/ctu.c
- comment of header
-You need to use "renesas,rsrc-card" sound card for it.
+You need to use "simple-scu-audio-card" sound card for it.
example)
sound {
- compatible = "renesas,rsrc-card";
+ compatible = "simple-scu-audio-card";
...
/*
* CTU setting
* All input data will be converted to 2ch
* as output data
*/
- convert-channels = <2>;
+ simple-audio-card,convert-channels = <2>;
...
- cpu {
+ simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
};
- codec {
+ simple-audio-card,codec {
...
};
};
@@ -190,22 +190,22 @@ and these sounds will be merged by MIX.
aplay -D plughw:0,0 xxxx.wav &
aplay -D plughw:0,1 yyyy.wav
-You need to use "renesas,rsrc-card" sound card for it.
+You need to use "simple-scu-audio-card" sound card for it.
Ex)
[MEM] -> [SRC1] -> [CTU02] -+-> [MIX0] -> [DVC0] -> [SSI0]
|
[MEM] -> [SRC2] -> [CTU03] -+
sound {
- compatible = "renesas,rsrc-card";
+ compatible = "simple-scu-audio-card";
...
- cpu@0 {
+ simple-audio-card,cpu@0 {
sound-dai = <&rcar_sound 0>;
};
- cpu@1 {
+ simple-audio-card,cpu@1 {
sound-dai = <&rcar_sound 1>;
};
- codec {
+ simple-audio-card,codec {
...
};
};
--
2.11.0
next prev parent reply other threads:[~2017-05-17 9:52 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-26 2:25 [PATCH 0/2] ASoC: rsnd: tidyup Document Kuninori Morimoto
2017-04-26 2:26 ` [PATCH 1/2] ASoC: rsnd: move "renesas,rsrc-card" to "simple-scu-audio-card" on Document Kuninori Morimoto
2017-05-17 9:52 ` Mark Brown [this message]
2017-04-26 2:26 ` [PATCH 2/2] ASoC: rsnd: add missing clocks/clock-names " Kuninori Morimoto
2017-04-26 7:46 ` Geert Uytterhoeven
2017-04-27 1:01 ` Kuninori Morimoto
2017-05-17 9:52 ` Applied "ASoC: rsnd: add missing clocks/clock-names on Document" to the asoc tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1dAvdG-0006ut-Tt@debutante \
--to=broonie@kernel.org \
--cc=kuninori.morimoto.gx@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox