From: Mark Brown <broonie@kernel.org>
Cc: Oder Chiou <oder_chiou@realtek.com>,
jack.yu@realtek.com, alsa-devel@alsa-project.org,
hychao@google.com, lgirdwood@gmail.com, albertchen@realtek.com,
broonie@kernel.org, shumingf@realtek.com, bardliao@realtek.com,
flove@realtek.com
Subject: Applied "ASoC: rt5663: Update the calibration funciton" to the asoc tree
Date: Fri, 07 Jul 2017 13:52:43 +0100 [thread overview]
Message-ID: <E1dTSkV-0002rg-Mq@finisterre> (raw)
In-Reply-To: <1499417939-319-1-git-send-email-oder_chiou@realtek.com>
The patch
ASoC: rt5663: Update the calibration funciton
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 1a425dbf1a1014742312123a04e3fc6ed646c738 Mon Sep 17 00:00:00 2001
From: "oder_chiou@realtek.com" <oder_chiou@realtek.com>
Date: Fri, 7 Jul 2017 16:58:57 +0800
Subject: [PATCH] ASoC: rt5663: Update the calibration funciton
The patch updates the calibration funciton for getting the correct DC
offset of headphone output.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
sound/soc/codecs/rt5663.c | 100 ++++++++++++++++++++++++++++++++++++----------
1 file changed, 79 insertions(+), 21 deletions(-)
diff --git a/sound/soc/codecs/rt5663.c b/sound/soc/codecs/rt5663.c
index a33202affeb1..18b3b526b7c5 100644
--- a/sound/soc/codecs/rt5663.c
+++ b/sound/soc/codecs/rt5663.c
@@ -2986,47 +2986,75 @@ static void rt5663_calibrate(struct rt5663_priv *rt5663)
{
int value, count;
- regmap_write(rt5663->regmap, RT5663_RC_CLK, 0x0280);
+ regmap_write(rt5663->regmap, RT5663_RESET, 0x0000);
+ msleep(20);
+ regmap_write(rt5663->regmap, RT5663_ANA_BIAS_CUR_4, 0x00a1);
+ regmap_write(rt5663->regmap, RT5663_RC_CLK, 0x0380);
regmap_write(rt5663->regmap, RT5663_GLB_CLK, 0x8000);
- regmap_write(rt5663->regmap, RT5663_DIG_MISC, 0x8001);
+ regmap_write(rt5663->regmap, RT5663_ADDA_CLK_1, 0x1000);
regmap_write(rt5663->regmap, RT5663_VREF_RECMIX, 0x0032);
- regmap_write(rt5663->regmap, RT5663_PWR_ANLG_1, 0xa2be);
- msleep(20);
- regmap_write(rt5663->regmap, RT5663_PWR_ANLG_1, 0xf2be);
- regmap_write(rt5663->regmap, RT5663_PWR_DIG_2, 0x8400);
- regmap_write(rt5663->regmap, RT5663_CHOP_ADC, 0x3000);
- regmap_write(rt5663->regmap, RT5663_DEPOP_1, 0x003b);
- regmap_write(rt5663->regmap, RT5663_PWR_DIG_1, 0x8df8);
- regmap_write(rt5663->regmap, RT5663_PWR_ANLG_2, 0x0003);
- regmap_write(rt5663->regmap, RT5663_PWR_ANLG_3, 0x018c);
- regmap_write(rt5663->regmap, RT5663_ADDA_CLK_1, 0x1111);
+ regmap_write(rt5663->regmap, RT5663_HP_IMP_SEN_19, 0x000c);
+ regmap_write(rt5663->regmap, RT5663_DUMMY_1, 0x0324);
+ regmap_write(rt5663->regmap, RT5663_DIG_MISC, 0x8001);
+ regmap_write(rt5663->regmap, RT5663_PWR_ANLG_1, 0xa23b);
+ msleep(30);
+ regmap_write(rt5663->regmap, RT5663_PWR_ANLG_1, 0xf23b);
+ regmap_write(rt5663->regmap, RT5663_PWR_ANLG_2, 0x8000);
+ regmap_write(rt5663->regmap, RT5663_PWR_ANLG_3, 0x0008);
regmap_write(rt5663->regmap, RT5663_PRE_DIV_GATING_1, 0xffff);
regmap_write(rt5663->regmap, RT5663_PRE_DIV_GATING_2, 0xffff);
+ regmap_write(rt5663->regmap, RT5663_CBJ_1, 0x8c10);
+ regmap_write(rt5663->regmap, RT5663_IL_CMD_2, 0x00c1);
+ regmap_write(rt5663->regmap, RT5663_EM_JACK_TYPE_1, 0xb880);
+ regmap_write(rt5663->regmap, RT5663_EM_JACK_TYPE_2, 0x4110);
+ regmap_write(rt5663->regmap, RT5663_EM_JACK_TYPE_2, 0x4118);
+
+ count = 0;
+ while (true) {
+ regmap_read(rt5663->regmap, RT5663_INT_ST_2, &value);
+ if (!(value & 0x80))
+ usleep_range(10000, 10005);
+ else
+ break;
+
+ if (count > 200)
+ break;
+ }
+
+ regmap_write(rt5663->regmap, RT5663_HP_IMP_SEN_19, 0x0000);
regmap_write(rt5663->regmap, RT5663_DEPOP_2, 0x3003);
+ regmap_write(rt5663->regmap, RT5663_DEPOP_1, 0x0038);
regmap_write(rt5663->regmap, RT5663_DEPOP_1, 0x003b);
+ regmap_write(rt5663->regmap, RT5663_PWR_DIG_2, 0x8400);
+ regmap_write(rt5663->regmap, RT5663_PWR_DIG_1, 0x8df8);
+ regmap_write(rt5663->regmap, RT5663_PWR_ANLG_2, 0x8003);
+ regmap_write(rt5663->regmap, RT5663_PWR_ANLG_3, 0x018c);
regmap_write(rt5663->regmap, RT5663_HP_CHARGE_PUMP_1, 0x1e32);
- regmap_write(rt5663->regmap, RT5663_HP_CHARGE_PUMP_2, 0x1371);
regmap_write(rt5663->regmap, RT5663_DACREF_LDO, 0x3b0b);
- regmap_write(rt5663->regmap, RT5663_STO_DAC_MIXER, 0x2080);
+ regmap_write(rt5663->regmap, RT5663_STO_DAC_MIXER, 0x0000);
regmap_write(rt5663->regmap, RT5663_BYPASS_STO_DAC, 0x000c);
- regmap_write(rt5663->regmap, RT5663_HP_BIAS, 0xabba);
+ regmap_write(rt5663->regmap, RT5663_HP_BIAS, 0xafaa);
regmap_write(rt5663->regmap, RT5663_CHARGE_PUMP_1, 0x2224);
regmap_write(rt5663->regmap, RT5663_HP_OUT_EN, 0x8088);
regmap_write(rt5663->regmap, RT5663_STO_DRE_9, 0x0017);
regmap_write(rt5663->regmap, RT5663_STO_DRE_10, 0x0017);
regmap_write(rt5663->regmap, RT5663_STO1_ADC_MIXER, 0x4040);
+ regmap_write(rt5663->regmap, RT5663_CHOP_ADC, 0x3000);
regmap_write(rt5663->regmap, RT5663_RECMIX, 0x0005);
regmap_write(rt5663->regmap, RT5663_ADDA_RST, 0xc000);
regmap_write(rt5663->regmap, RT5663_STO1_HPF_ADJ1, 0x3320);
regmap_write(rt5663->regmap, RT5663_HP_CALIB_2, 0x00c9);
regmap_write(rt5663->regmap, RT5663_DUMMY_1, 0x004c);
- regmap_write(rt5663->regmap, RT5663_ANA_BIAS_CUR_1, 0x7766);
- regmap_write(rt5663->regmap, RT5663_BIAS_CUR_8, 0x4702);
- msleep(200);
+ regmap_write(rt5663->regmap, RT5663_ANA_BIAS_CUR_1, 0x1111);
+ regmap_write(rt5663->regmap, RT5663_BIAS_CUR_8, 0x4402);
+ regmap_write(rt5663->regmap, RT5663_CHARGE_PUMP_2, 0x3311);
regmap_write(rt5663->regmap, RT5663_HP_CALIB_1, 0x0069);
- regmap_write(rt5663->regmap, RT5663_HP_CALIB_3, 0x06c2);
- regmap_write(rt5663->regmap, RT5663_HP_CALIB_1_1, 0x7b00);
- regmap_write(rt5663->regmap, RT5663_HP_CALIB_1_1, 0xfb00);
+ regmap_write(rt5663->regmap, RT5663_HP_CALIB_3, 0x06ce);
+ regmap_write(rt5663->regmap, RT5663_HP_CALIB_1_1, 0x6800);
+ regmap_write(rt5663->regmap, RT5663_CHARGE_PUMP_2, 0x1100);
+ regmap_write(rt5663->regmap, RT5663_HP_CALIB_7, 0x0057);
+ regmap_write(rt5663->regmap, RT5663_HP_CALIB_1_1, 0xe800);
+
count = 0;
while (true) {
regmap_read(rt5663->regmap, RT5663_HP_CALIB_1_1, &value);
@@ -3039,6 +3067,36 @@ static void rt5663_calibrate(struct rt5663_priv *rt5663)
return;
count++;
}
+
+ regmap_write(rt5663->regmap, RT5663_HP_CALIB_1_1, 0x6200);
+ regmap_write(rt5663->regmap, RT5663_HP_CALIB_7, 0x0059);
+ regmap_write(rt5663->regmap, RT5663_HP_CALIB_1_1, 0xe200);
+
+ count = 0;
+ while (true) {
+ regmap_read(rt5663->regmap, RT5663_HP_CALIB_1_1, &value);
+ if (value & 0x8000)
+ usleep_range(10000, 10005);
+ else
+ break;
+
+ if (count > 200)
+ return;
+ count++;
+ }
+
+ regmap_write(rt5663->regmap, RT5663_EM_JACK_TYPE_1, 0xb8e0);
+ usleep_range(10000, 10005);
+ regmap_write(rt5663->regmap, RT5663_PWR_ANLG_1, 0x003b);
+ usleep_range(10000, 10005);
+ regmap_write(rt5663->regmap, RT5663_PWR_DIG_1, 0x0000);
+ usleep_range(10000, 10005);
+ regmap_write(rt5663->regmap, RT5663_DEPOP_1, 0x000b);
+ usleep_range(10000, 10005);
+ regmap_write(rt5663->regmap, RT5663_DEPOP_1, 0x0008);
+ usleep_range(10000, 10005);
+ regmap_write(rt5663->regmap, RT5663_PWR_ANLG_2, 0x0000);
+ usleep_range(10000, 10005);
}
static int rt5663_i2c_probe(struct i2c_client *i2c,
--
2.13.2
prev parent reply other threads:[~2017-07-07 12:52 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-07 8:58 [PATCH 1/3] ASoC: rt5663: Update the calibration funciton Oder Chiou
2017-07-07 8:58 ` [PATCH 2/3] ASoC: rt5663: Optimize the Jack Type detection Oder Chiou
2017-07-07 12:52 ` Applied "ASoC: rt5663: Optimize the Jack Type detection" to the asoc tree Mark Brown
2017-07-07 8:58 ` [PATCH 3/3] ASoC: rt5663: Modify the power sequence for reducing the pop sound Oder Chiou
2017-07-07 12:52 ` Applied "ASoC: rt5663: Modify the power sequence for reducing the pop sound" to the asoc tree Mark Brown
2017-07-07 12:52 ` Mark Brown [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1dTSkV-0002rg-Mq@finisterre \
--to=broonie@kernel.org \
--cc=albertchen@realtek.com \
--cc=alsa-devel@alsa-project.org \
--cc=bardliao@realtek.com \
--cc=flove@realtek.com \
--cc=hychao@google.com \
--cc=jack.yu@realtek.com \
--cc=lgirdwood@gmail.com \
--cc=oder_chiou@realtek.com \
--cc=shumingf@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox