From: Mark Brown <broonie@kernel.org>
To: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>,
Mark Brown <broonie@kernel.org>,
alsa-devel@alsa-project.org
Subject: Applied "ASoC: wm9713: add ac97 new bus support" to the asoc tree
Date: Tue, 19 Sep 2017 17:11:13 +0100 [thread overview]
Message-ID: <E1duL7B-0004iy-45@debutante> (raw)
In-Reply-To:
The patch
ASoC: wm9713: add ac97 new bus support
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 9bd400cadae05a26c3a22dd8393081cb96d0e26a Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <robert.jarzmik@free.fr>
Date: Wed, 13 Sep 2017 21:37:19 +0200
Subject: [PATCH] ASoC: wm9713: add ac97 new bus support
Add support for the new ac97 bus model, where devices are automatically
discovered on AC-Links.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
sound/soc/codecs/Kconfig | 3 ++-
sound/soc/codecs/wm9713.c | 39 +++++++++++++++++++++++++++------------
2 files changed, 29 insertions(+), 13 deletions(-)
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index c367d11079bc..807901cac1b3 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -216,7 +216,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_WM9090 if I2C
select SND_SOC_WM9705 if SND_SOC_AC97_BUS
select SND_SOC_WM9712 if SND_SOC_AC97_BUS
- select SND_SOC_WM9713 if SND_SOC_AC97_BUS
+ select SND_SOC_WM9713 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW)
help
Normally ASoC codec drivers are only built if a machine driver which
uses them is also built since they are only usable with a machine
@@ -1136,6 +1136,7 @@ config SND_SOC_WM9712
config SND_SOC_WM9713
tristate
select REGMAP_AC97
+ select AC97_BUS_COMPAT if AC97_BUS_NEW
config SND_SOC_ZX_AUD96P22
tristate "ZTE ZX AUD96P22 CODEC"
diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
index 7e4822185feb..df7220656d98 100644
--- a/sound/soc/codecs/wm9713.c
+++ b/sound/soc/codecs/wm9713.c
@@ -17,12 +17,15 @@
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/mfd/wm97xx.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/regmap.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/ac97_codec.h>
+#include <sound/ac97/codec.h>
+#include <sound/ac97/compat.h>
#include <sound/initval.h>
#include <sound/pcm_params.h>
#include <sound/tlv.h>
@@ -38,6 +41,7 @@ struct wm9713_priv {
u32 pll_in; /* PLL input frequency */
unsigned int hp_mixer[2];
struct mutex lock;
+ struct wm97xx_platform_data *mfd_pdata;
};
#define HPL_MIXER 0
@@ -1205,17 +1209,23 @@ static int wm9713_soc_resume(struct snd_soc_codec *codec)
static int wm9713_soc_probe(struct snd_soc_codec *codec)
{
struct wm9713_priv *wm9713 = snd_soc_codec_get_drvdata(codec);
- struct regmap *regmap;
+ struct regmap *regmap = NULL;
- wm9713->ac97 = snd_soc_new_ac97_codec(codec, WM9713_VENDOR_ID,
- WM9713_VENDOR_ID_MASK);
- if (IS_ERR(wm9713->ac97))
- return PTR_ERR(wm9713->ac97);
-
- regmap = regmap_init_ac97(wm9713->ac97, &wm9713_regmap_config);
- if (IS_ERR(regmap)) {
- snd_soc_free_ac97_codec(wm9713->ac97);
- return PTR_ERR(regmap);
+ if (wm9713->mfd_pdata) {
+ wm9713->ac97 = wm9713->mfd_pdata->ac97;
+ regmap = wm9713->mfd_pdata->regmap;
+ } else {
+#ifdef CONFIG_SND_SOC_AC97_BUS
+ wm9713->ac97 = snd_soc_new_ac97_codec(codec, WM9713_VENDOR_ID,
+ WM9713_VENDOR_ID_MASK);
+ if (IS_ERR(wm9713->ac97))
+ return PTR_ERR(wm9713->ac97);
+ regmap = regmap_init_ac97(wm9713->ac97, &wm9713_regmap_config);
+ if (IS_ERR(regmap)) {
+ snd_soc_free_ac97_codec(wm9713->ac97);
+ return PTR_ERR(regmap);
+ }
+#endif
}
snd_soc_codec_init_regmap(codec, regmap);
@@ -1228,10 +1238,14 @@ static int wm9713_soc_probe(struct snd_soc_codec *codec)
static int wm9713_soc_remove(struct snd_soc_codec *codec)
{
+#ifdef CONFIG_SND_SOC_AC97_BUS
struct wm9713_priv *wm9713 = snd_soc_codec_get_drvdata(codec);
- snd_soc_codec_exit_regmap(codec);
- snd_soc_free_ac97_codec(wm9713->ac97);
+ if (!wm9713->mfd_pdata) {
+ snd_soc_codec_exit_regmap(codec);
+ snd_soc_free_ac97_codec(wm9713->ac97);
+ }
+#endif
return 0;
}
@@ -1262,6 +1276,7 @@ static int wm9713_probe(struct platform_device *pdev)
mutex_init(&wm9713->lock);
+ wm9713->mfd_pdata = dev_get_platdata(&pdev->dev);
platform_set_drvdata(pdev, wm9713);
return snd_soc_register_codec(&pdev->dev,
--
2.14.1
reply other threads:[~2017-09-19 16:11 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1duL7B-0004iy-45@debutante \
--to=broonie@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=ckeepax@opensource.wolfsonmicro.com \
--cc=robert.jarzmik@free.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox