From: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org, tiwai@suse.de, lgirdwood@gmail.com,
Akshu Agrawal <Akshu.Agrawal@amd.com>,
broonie@kernel.org, Vijendar.Mukunda@amd.com,
Alex Deucher <alexander.deucher@amd.com>
Subject: Applied "ASoC: amd: Modified DMA transfer Mechanism for Playback" to the asoc tree
Date: Thu, 09 Nov 2017 17:42:26 +0000 [thread overview]
Message-ID: <E1eCqqQ-0006as-1m@debutante> (raw)
In-Reply-To: <20171109173552.21438-2-alexander.deucher@amd.com>
The patch
ASoC: amd: Modified DMA transfer Mechanism for Playback
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 31c45b3e8d0ecc3a5cbfbf3dfe18adeab2f17a48 Mon Sep 17 00:00:00 2001
From: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Date: Thu, 9 Nov 2017 12:35:52 -0500
Subject: [PATCH] ASoC: amd: Modified DMA transfer Mechanism for Playback
Before rendering starts, DMA driver copies full buffer valid data
to ACP SRAM for the first time, after that ACP SRAM to I2S
FIFO DMA will be initiated. After rendering first half of ACP SRAM,
IOC will be raised then Audio data will be copied from first half of
System Memory to first half of ACP SRAM. Similarly after rendering
second half of ACP SRAM, IOC will be raised then Audio Data will be
copied from second half of the System Memory to second half of the
ACP SRAM in ping-pong way till rendering stops.
Old design introducing latency issues resulting stutter sound observed
during playback.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Akshu Agrawal <Akshu.Agrawal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
sound/soc/amd/acp-pcm-dma.c | 27 +++++----------------------
1 file changed, 5 insertions(+), 22 deletions(-)
diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c
index ef7e98ad960c..9f521a55d610 100644
--- a/sound/soc/amd/acp-pcm-dma.c
+++ b/sound/soc/amd/acp-pcm-dma.c
@@ -193,8 +193,8 @@ static void set_acp_sysmem_dma_descriptors(void __iomem *acp_mmio,
dmadscr[i].xfer_val = 0;
if (direction == SNDRV_PCM_STREAM_PLAYBACK) {
dma_dscr_idx = PLAYBACK_START_DMA_DESCR_CH12 + i;
- dmadscr[i].dest = ACP_SHARED_RAM_BANK_1_ADDRESS +
- (size / 2) - (i * (size/2));
+ dmadscr[i].dest = ACP_SHARED_RAM_BANK_1_ADDRESS
+ + (i * (size/2));
dmadscr[i].src = ACP_INTERNAL_APERTURE_WINDOW_0_ADDRESS
+ (pte_offset * SZ_4K) + (i * (size/2));
switch (asic_type) {
@@ -655,9 +655,9 @@ static irqreturn_t dma_irq_handler(int irq, void *arg)
valid_irq = true;
if (acp_reg_read(acp_mmio, mmACP_DMA_CUR_DSCR_13) ==
PLAYBACK_START_DMA_DESCR_CH13)
- dscr_idx = PLAYBACK_START_DMA_DESCR_CH12;
- else
dscr_idx = PLAYBACK_END_DMA_DESCR_CH12;
+ else
+ dscr_idx = PLAYBACK_START_DMA_DESCR_CH12;
config_acp_dma_channel(acp_mmio, SYSRAM_TO_ACP_CH_NUM, dscr_idx,
1, 0);
acp_dma_start(acp_mmio, SYSRAM_TO_ACP_CH_NUM, false);
@@ -882,23 +882,6 @@ static int acp_dma_prepare(struct snd_pcm_substream *substream)
config_acp_dma_channel(rtd->acp_mmio, ACP_TO_I2S_DMA_CH_NUM,
PLAYBACK_START_DMA_DESCR_CH13,
NUM_DSCRS_PER_CHANNEL, 0);
- /* Fill ACP SRAM (2 periods) with zeros from System RAM
- * which is zero-ed in hw_params
- */
- acp_dma_start(rtd->acp_mmio, SYSRAM_TO_ACP_CH_NUM, false);
-
- /* ACP SRAM (2 periods of buffer size) is intially filled with
- * zeros. Before rendering starts, 2nd half of SRAM will be
- * filled with valid audio data DMA'ed from first half of system
- * RAM and 1st half of SRAM will be filled with Zeros. This is
- * the initial scenario when redering starts from SRAM. Later
- * on, 2nd half of system memory will be DMA'ed to 1st half of
- * SRAM, 1st half of system memory will be DMA'ed to 2nd half of
- * SRAM in ping-pong way till rendering stops.
- */
- config_acp_dma_channel(rtd->acp_mmio, SYSRAM_TO_ACP_CH_NUM,
- PLAYBACK_START_DMA_DESCR_CH12,
- 1, 0);
} else {
config_acp_dma_channel(rtd->acp_mmio, ACP_TO_SYSRAM_CH_NUM,
CAPTURE_START_DMA_DESCR_CH14,
@@ -913,7 +896,7 @@ static int acp_dma_prepare(struct snd_pcm_substream *substream)
static int acp_dma_trigger(struct snd_pcm_substream *substream, int cmd)
{
int ret;
- u32 loops = 1000;
+ u32 loops = 4000;
u64 bytescount = 0;
struct snd_pcm_runtime *runtime = substream->runtime;
--
2.15.0
next prev parent reply other threads:[~2017-11-09 17:42 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-09 17:35 [PATCH v3] ASoC: rt5645: Wait for 400msec before concluding on value of RT5645_VENDOR_ID2 Alex Deucher
2017-11-09 17:35 ` [PATCH] ASoC: amd: Modified DMA transfer Mechanism for Playback Alex Deucher
2017-11-09 17:42 ` Mark Brown [this message]
2017-11-09 17:42 ` Applied "ASoC: rt5645: Wait for 400msec before concluding on value of RT5645_VENDOR_ID2" to the asoc tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1eCqqQ-0006as-1m@debutante \
--to=broonie@kernel.org \
--cc=Akshu.Agrawal@amd.com \
--cc=Vijendar.Mukunda@amd.com \
--cc=alexander.deucher@amd.com \
--cc=alsa-devel@alsa-project.org \
--cc=lgirdwood@gmail.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox