Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Brown <broonie@kernel.org>
To: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: alsa-devel@alsa-project.org, Mark Brown <broonie@kernel.org>,
	hiroyuki.yokoyama.vx@renesas.com
Subject: Applied "ASoC: rsnd: indicate IRQ error status for debug" to the asoc tree
Date: Tue, 13 Feb 2018 12:16:21 +0000	[thread overview]
Message-ID: <E1elZVV-0005ZQ-CS@debutante> (raw)
In-Reply-To: <874lmllk1k.wl%kuninori.morimoto.gx@renesas.com>

The patch

   ASoC: rsnd: indicate IRQ error status for debug

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 2b62786951ca38cc9fd0bd9273de0aae1b45134d Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Tue, 13 Feb 2018 02:08:53 +0000
Subject: [PATCH] ASoC: rsnd: indicate IRQ error status for debug

SSI/SRC have under/over flow error handling, and its status is useful
for debuging. But sometimes it might be too much message,
and it might blocks necessity other information.

To avoid such situation, basically this patch indicates interrupt
status debug message if DEBUG was defined, but it will be suppressed
if RSND_DEBUG_NO_IRQ_STATUS was defined.

Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/sh/rcar/rsnd.h | 10 ++++++++++
 sound/soc/sh/rcar/src.c  | 22 ++++++++++++++++++++--
 sound/soc/sh/rcar/ssi.c  | 16 +++++++++++++++-
 3 files changed, 45 insertions(+), 3 deletions(-)

diff --git a/sound/soc/sh/rcar/rsnd.h b/sound/soc/sh/rcar/rsnd.h
index ad6523595b0a..5241ea7cf153 100644
--- a/sound/soc/sh/rcar/rsnd.h
+++ b/sound/soc/sh/rcar/rsnd.h
@@ -788,4 +788,14 @@ void rsnd_mod_make_sure(struct rsnd_mod *mod, enum rsnd_mod_type type);
 #define rsnd_mod_confirm_dvc(mdvc)
 #endif
 
+/*
+ * If you don't need interrupt status debug message,
+ * define RSND_DEBUG_NO_IRQ_STATUS as 1 on top of src.c/ssi.c
+ *
+ * #define RSND_DEBUG_NO_IRQ_STATUS 1
+ */
+#define rsnd_dbg_irq_status(dev, param...)		\
+	if (!IS_BUILTIN(RSND_DEBUG_NO_IRQ_STATUS))	\
+		dev_dbg(dev, param)
+
 #endif
diff --git a/sound/soc/sh/rcar/src.c b/sound/soc/sh/rcar/src.c
index 510b68a483b4..a727e71587b6 100644
--- a/sound/soc/sh/rcar/src.c
+++ b/sound/soc/sh/rcar/src.c
@@ -8,6 +8,15 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+
+/*
+ * you can enable below define if you don't need
+ * SSI interrupt status debug message when debugging
+ * see rsnd_dbg_irq_status()
+ *
+ * #define RSND_DEBUG_NO_IRQ_STATUS 1
+ */
+
 #include "rsnd.h"
 
 #define SRC_NAME "src"
@@ -325,7 +334,10 @@ static void rsnd_src_status_clear(struct rsnd_mod *mod)
 
 static bool rsnd_src_error_occurred(struct rsnd_mod *mod)
 {
+	struct rsnd_priv *priv = rsnd_mod_to_priv(mod);
+	struct device *dev = rsnd_priv_to_dev(priv);
 	u32 val0, val1;
+	u32 status0, status1;
 	bool ret = false;
 
 	val0 = val1 = OUF_SRC(rsnd_mod_id(mod));
@@ -338,9 +350,15 @@ static bool rsnd_src_error_occurred(struct rsnd_mod *mod)
 	if (rsnd_src_sync_is_enabled(mod))
 		val0 = val0 & 0xffff;
 
-	if ((rsnd_mod_read(mod, SCU_SYS_STATUS0) & val0) ||
-	    (rsnd_mod_read(mod, SCU_SYS_STATUS1) & val1))
+	status0 = rsnd_mod_read(mod, SCU_SYS_STATUS0);
+	status1 = rsnd_mod_read(mod, SCU_SYS_STATUS1);
+	if ((status0 & val0) || (status1 & val1)) {
+		rsnd_dbg_irq_status(dev, "%s[%d] err status : 0x%08x, 0x%08x\n",
+			rsnd_mod_name(mod), rsnd_mod_id(mod),
+			status0, status1);
+
 		ret = true;
+	}
 
 	return ret;
 }
diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index 97a9db892a8f..333b802681ad 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -11,6 +11,15 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+
+/*
+ * you can enable below define if you don't need
+ * SSI interrupt status debug message when debugging
+ * see rsnd_dbg_irq_status()
+ *
+ * #define RSND_DEBUG_NO_IRQ_STATUS 1
+ */
+
 #include <sound/simple_card_utils.h>
 #include <linux/delay.h>
 #include "rsnd.h"
@@ -603,6 +612,7 @@ static void __rsnd_ssi_interrupt(struct rsnd_mod *mod,
 				 struct rsnd_dai_stream *io)
 {
 	struct rsnd_priv *priv = rsnd_mod_to_priv(mod);
+	struct device *dev = rsnd_priv_to_dev(priv);
 	int is_dma = rsnd_ssi_is_dma_mode(mod);
 	u32 status;
 	bool elapsed = false;
@@ -621,8 +631,12 @@ static void __rsnd_ssi_interrupt(struct rsnd_mod *mod,
 		elapsed = rsnd_ssi_pio_interrupt(mod, io);
 
 	/* DMA only */
-	if (is_dma && (status & (UIRQ | OIRQ)))
+	if (is_dma && (status & (UIRQ | OIRQ))) {
+		rsnd_dbg_irq_status(dev, "%s[%d] err status : 0x%08x\n",
+			rsnd_mod_name(mod), rsnd_mod_id(mod), status);
+
 		stop = true;
+	}
 
 	rsnd_ssi_status_clear(mod);
 rsnd_ssi_interrupt_out:
-- 
2.16.1

  reply	other threads:[~2018-02-13 12:16 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <878tc4dn9n.wl%kuninori.morimoto.gx@renesas.com>
     [not found] ` <857620180208065751hiroyuki.yokoyama.vx@renesas.com>
     [not found]   ` <876078dku6.wl%kuninori.morimoto.gx@renesas.com>
     [not found]     ` <857620180208072607hiroyuki.yokoyama.vx@renesas.com>
     [not found]       ` <874lmrev6g.wl%kuninori.morimoto.gx@renesas.com>
     [not found]         ` <712020180209094931hiroyuki.yokoyama.vx@renesas.com>
     [not found]           ` <87o9ky5vbj.wl%kuninori.morimoto.gx@renesas.com>
2018-02-13  2:08             ` ASoC: rsnd: status debug message and its suppress Kuninori Morimoto
2018-02-13  2:08               ` [PATCH 1/2] ASoC: rsnd: indicate IRQ error status for debug Kuninori Morimoto
2018-02-13 12:16                 ` Mark Brown [this message]
2018-02-13  2:09               ` [PATCH 2/2] ASoC: rsnd: suppress rsnd_dai_call() debug message Kuninori Morimoto
2018-02-13 12:16                 ` Applied "ASoC: rsnd: suppress rsnd_dai_call() debug message" to the asoc tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1elZVV-0005ZQ-CS@debutante \
    --to=broonie@kernel.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=hiroyuki.yokoyama.vx@renesas.com \
    --cc=kuninori.morimoto.gx@renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox