From: Mark Brown <broonie@kernel.org>
To: Hans de Goede <hdegoede@redhat.com>
Cc: Oder Chiou <oder_chiou@realtek.com>,
alsa-devel@alsa-project.org,
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
Takashi Iwai <tiwai@suse.com>, Mark Brown <broonie@kernel.org>,
Carlo Caione <carlo@endlessm.com>,
Bard Liao <bardliao@realtek.com>
Subject: Applied "ASoC: rt5651: Allow specifying over-current threshold through a device-property" to the asoc tree
Date: Wed, 07 Mar 2018 14:14:27 +0000 [thread overview]
Message-ID: <E1etZpr-0001SG-0E@debutante> (raw)
In-Reply-To: <20180304143610.21125-5-hdegoede@redhat.com>
The patch
ASoC: rt5651: Allow specifying over-current threshold through a device-property
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 583a9debd71e21a317b1fc7b293c22c49b33d9e4 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Sun, 4 Mar 2018 15:35:52 +0100
Subject: [PATCH] ASoC: rt5651: Allow specifying over-current threshold through
a device-property
OVer-Current-Detection (OVCD) for the micbias current is used to detect
if an inserted jack is a headset or headphones (mic shorted to ground).
Some boards may need different values for the OVCD current threshold
because of a resistor on the board in serial with or parallel to the
jack mic contact.
This commit adds support for configuring the OCVD current threshold
through the "realtek,over-current-threshold-microamp" device-property.
Note this commit changes the default value from 600uA to 2000uA,
because testing has shown 600uA to be a poor default.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
sound/soc/codecs/rt5651.c | 22 +++++++++++++++++++++-
sound/soc/codecs/rt5651.h | 1 +
2 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/rt5651.c b/sound/soc/codecs/rt5651.c
index 50e1c501b6b9..7ff1bc892cfd 100644
--- a/sound/soc/codecs/rt5651.c
+++ b/sound/soc/codecs/rt5651.c
@@ -1638,7 +1638,7 @@ static int rt5651_set_jack(struct snd_soc_component *component,
RT5651_PWR_CLK12M_MASK |
RT5651_PWR_MB_MASK,
RT5651_MIC1_OVCD_EN |
- RT5651_MIC1_OVTH_600UA |
+ rt5651->ovcd_th |
RT5651_PWR_MB_PU |
RT5651_PWR_CLK12M_PU);
@@ -1684,6 +1684,26 @@ static void rt5651_apply_properties(struct snd_soc_component *component)
if (device_property_read_u32(component->dev,
"realtek,jack-detect-source", &val) == 0)
rt5651->jd_src = val;
+
+ rt5651->ovcd_th = RT5651_MIC1_OVTH_2000UA;
+
+ if (device_property_read_u32(component->dev,
+ "realtek,over-current-threshold-microamp", &val) == 0) {
+ switch (val) {
+ case 600:
+ rt5651->ovcd_th = RT5651_MIC1_OVTH_600UA;
+ break;
+ case 1500:
+ rt5651->ovcd_th = RT5651_MIC1_OVTH_1500UA;
+ break;
+ case 2000:
+ rt5651->ovcd_th = RT5651_MIC1_OVTH_2000UA;
+ break;
+ default:
+ dev_warn(component->dev, "Warning: Invalid over-current-threshold-microamp value: %d, defaulting to 2000uA\n",
+ val);
+ }
+ }
}
static int rt5651_probe(struct snd_soc_component *component)
diff --git a/sound/soc/codecs/rt5651.h b/sound/soc/codecs/rt5651.h
index f3158488fc89..9cd5c279d0d6 100644
--- a/sound/soc/codecs/rt5651.h
+++ b/sound/soc/codecs/rt5651.h
@@ -2064,6 +2064,7 @@ struct rt5651_priv {
struct snd_soc_jack *hp_jack;
struct delayed_work jack_detect_work;
enum rt5651_jd_src jd_src;
+ unsigned int ovcd_th;
int irq;
int sysclk;
--
2.16.2
next prev parent reply other threads:[~2018-03-07 14:14 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-04 14:35 [PATCH v3 00/22] ASoC: rt5651: jack-detect fixes and improvements Hans de Goede
2018-03-04 14:35 ` [PATCH v3 01/22] ASoC: rt5651: Make rt5651_apply_properties() private Hans de Goede
2018-03-07 14:14 ` Applied "ASoC: rt5651: Make rt5651_apply_properties() private" to the asoc tree Mark Brown
2018-03-04 14:35 ` [PATCH v3 02/22] ASoC: rt5651: Add devicetree-bindings for jack-detect Hans de Goede
2018-03-07 14:14 ` Applied "ASoC: rt5651: Add devicetree-bindings for jack-detect" to the asoc tree Mark Brown
2018-03-04 14:35 ` [PATCH v3 03/22] ASoC: rt5651: Configure jack-detect source through a device-property Hans de Goede
2018-03-07 12:34 ` Mark Brown
2018-03-07 13:49 ` Hans de Goede
2018-03-07 14:28 ` Mark Brown
2018-03-07 14:14 ` Applied "ASoC: rt5651: Configure jack-detect source through a device-property" to the asoc tree Mark Brown
2018-03-04 14:35 ` [PATCH v3 04/22] ASoC: rt5651: Allow specifying over-current threshold through a device-property Hans de Goede
2018-03-07 14:14 ` Mark Brown [this message]
2018-03-04 14:35 ` [PATCH v3 05/22] ASoC: rt5651: Allow specifying the OVCD scale-factor " Hans de Goede
2018-03-07 14:14 ` Applied "ASoC: rt5651: Allow specifying the OVCD scale-factor through a device-property" to the asoc tree Mark Brown
2018-03-04 14:35 ` [PATCH v3 06/22] ASoC: rt5651: Enable sticky mode for OVCD Hans de Goede
2018-03-04 14:35 ` [PATCH v3 07/22] ASoC: rt5651: Enable Platform Clock during jack-type detect Hans de Goede
2018-03-04 14:35 ` [PATCH v3 08/22] ASoC: rt5651: Add rt5651_jack_inserted() helper Hans de Goede
2018-03-04 14:35 ` [PATCH v3 09/22] ASoC: rt5651: Rewrite jack-type detection Hans de Goede
2018-03-07 14:13 ` Applied "ASoC: rt5651: Rewrite jack-type detection" to the asoc tree Mark Brown
2018-03-04 14:35 ` [PATCH v3 10/22] ASoC: Intel: bytcr_rt5651: Not being able to find the codec ACPI-dev is an error Hans de Goede
2018-03-07 14:13 ` Applied "ASoC: Intel: bytcr_rt5651: Not being able to find the codec ACPI-dev is an error" to the asoc tree Mark Brown
2018-03-04 14:35 ` [PATCH v3 11/22] ASoC: Intel: bytcr_rt5651: Pass jack-src info via device-properties Hans de Goede
2018-03-07 14:22 ` Applied "ASoC: Intel: bytcr_rt5651: Pass jack-src info via device-properties" to the asoc tree Mark Brown
2018-03-04 14:36 ` [PATCH v3 12/22] ASoC: Intel: bytcr_rt5651: Actually honor the DMIC_EN quirk if specified Hans de Goede
2018-03-07 14:22 ` Applied "ASoC: Intel: bytcr_rt5651: Actually honor the DMIC_EN quirk if specified" to the asoc tree Mark Brown
2018-03-04 14:36 ` [PATCH v3 13/22] ASoC: Intel: bytcr_rt5651: Only create jack if we have a jack-detect source Hans de Goede
2018-03-07 14:22 ` Applied "ASoC: Intel: bytcr_rt5651: Only create jack if we have a jack-detect source" to the asoc tree Mark Brown
2018-03-04 14:36 ` [PATCH v3 14/22] ASoC: Intel: bytcr_rt5651: Add quirk micbias OVCD configuration Hans de Goede
2018-03-07 14:22 ` Applied "ASoC: Intel: bytcr_rt5651: Add quirk micbias OVCD configuration" to the asoc tree Mark Brown
2018-03-04 14:36 ` [PATCH v3 15/22] ASoC: Intel: bytcr_rt5651: Configure PLL1 before using it Hans de Goede
2018-03-04 14:36 ` [PATCH v3 16/22] ASoC: Intel: bytcr_rt5651: Drop snd_soc_dai_set_bclk_ratio() call Hans de Goede
2018-03-04 14:36 ` [PATCH v3 17/22] ASoC: Intel: bytcr_rt5651: Rename IN3_MAP to IN1_HS_IN3_MAP Hans de Goede
2018-03-04 14:36 ` [PATCH v3 18/22] ASoC: Intel: bytcr_rt5651: Add new IN2_HS_IN3 input map and a quirk using it Hans de Goede
2018-03-04 14:36 ` [PATCH v3 19/22] ASoC: Intel: bytcr_rt5651: Add support for Bay Trail CR / SSP0 using boards Hans de Goede
2018-03-07 14:21 ` Applied "ASoC: Intel: bytcr_rt5651: Add support for Bay Trail CR / SSP0 using boards" to the asoc tree Mark Brown
2018-03-09 23:30 ` [PATCH v3 19/22] ASoC: Intel: bytcr_rt5651: Add support for Bay Trail CR / SSP0 using boards Pierre-Louis Bossart
2018-03-11 18:19 ` Hans de Goede
2018-03-12 23:26 ` Pierre-Louis Bossart
2018-03-04 14:36 ` [PATCH v3 20/22] ASoC: Intel: bytcr_rt5651: Add quirk for the VIOS LTH17 laptop Hans de Goede
2018-03-04 14:36 ` [PATCH v3 21/22] ASoC: Intel: bytcr_rt5651: Change defaults to enable jack-detect, analog mics Hans de Goede
2018-03-04 14:36 ` [PATCH v3 22/22] ASoC: Intel: bytcr_rt5651: Select RCCLK on init() Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1etZpr-0001SG-0E@debutante \
--to=broonie@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=bardliao@realtek.com \
--cc=carlo@endlessm.com \
--cc=hdegoede@redhat.com \
--cc=oder_chiou@realtek.com \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox