From: Kai-Heng Feng <kai.heng.feng@canonical.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>,
SOUND <alsa-devel@alsa-project.org>,
Kai Vehmanen <kai.vehmanen@linux.intel.com>,
open list <linux-kernel@vger.kernel.org>,
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
tiwai@suse.com, Alex Deucher <alexander.deucher@amd.com>,
Mike Rapoport <rppt@kernel.org>
Subject: Re: [PATCH] ALSA: hda: Enable runtime PM when codec probe fails
Date: Mon, 14 Dec 2020 20:12:15 +0800 [thread overview]
Message-ID: <FKWBLQ.XJO3QQ2ZO2W23@canonical.com> (raw)
In-Reply-To: <s5hblewn7ij.wl-tiwai@suse.de>
On Mon, Dec 14, 2020 at 08:58, Takashi Iwai <tiwai@suse.de> wrote:
> On Mon, 14 Dec 2020 07:06:20 +0100,
> Kai-Heng Feng wrote:
>>
>> When codec probe fails, it doesn't enable runtime suspend, and can
>> prevent graphics card from getting powered down:
>> [ 4.280991] snd_hda_intel 0000:01:00.1: no codecs initialized
>>
>> $ cat /sys/bus/pci/devices/0000:01:00.1/power/runtime_status
>> active
>>
>> So enable runtime PM when codec probe fails, to let graphics card be
>> able to runtime suspend again.
>
> Well, the runtime status is also active if the driver isn't probed at
> all. In that sense, keeping the status active at the driver load
> failure is rather consistent, IMO. If the driver fails or unloaded,
> it should restore the status as if it were beforehand.
Ok, let me find a better way to handle it.
Kai-Heng
>
>
> thanks,
>
> Takashi
>
>>
>> Merge azx_probe_continue() into azx_probe() and just let probe fail
>> for
>> this case could be a better approach. However that's a much bigger
>> task
>> so let's settle with a quirk workaround.
>>
>> BugLink: <https://bugs.launchpad.net/bugs/1907212>
>> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com
>> <mailto:kai.heng.feng@canonical.com>>
>> ---
>> sound/pci/hda/hda_intel.c | 3 ++-
>> 1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
>> index 6852668f1bcb..3fd920069268 100644
>> --- a/sound/pci/hda/hda_intel.c
>> +++ b/sound/pci/hda/hda_intel.c
>> @@ -2328,7 +2328,7 @@ static int azx_probe_continue(struct azx
>> *chip)
>> if (bus->codec_mask) {
>> err = azx_probe_codecs(chip, azx_max_codecs[chip->driver_type]);
>> if (err < 0)
>> - goto out_free;
>> + goto out_enable_rpm;
>> }
>>
>> #ifdef CONFIG_SND_HDA_PATCH_LOADER
>> @@ -2360,6 +2360,7 @@ static int azx_probe_continue(struct azx
>> *chip)
>>
>> set_default_power_save(chip);
>>
>> +out_enable_rpm:
>> if (azx_has_pm_runtime(chip)) {
>> pm_runtime_use_autosuspend(&pci->dev);
>> pm_runtime_allow(&pci->dev);
>> --
>> 2.29.2
>>
next prev parent reply other threads:[~2020-12-14 14:24 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-14 6:06 [PATCH] ALSA: hda: Enable runtime PM when codec probe fails Kai-Heng Feng
2020-12-14 7:58 ` Takashi Iwai
2020-12-14 12:12 ` Kai-Heng Feng [this message]
2020-12-16 12:47 ` [PATCH v2] ALSA: hda: Continue to probe " Kai-Heng Feng
2020-12-16 15:41 ` Takashi Iwai
2020-12-16 15:50 ` Kai-Heng Feng
2020-12-16 15:58 ` Takashi Iwai
2020-12-16 16:07 ` Kai-Heng Feng
2020-12-16 16:22 ` Takashi Iwai
2020-12-16 16:57 ` Takashi Iwai
2020-12-18 5:09 ` Kai-Heng Feng
2020-12-18 8:06 ` Takashi Iwai
2020-12-21 16:33 ` Kai-Heng Feng
2020-12-21 16:47 ` Takashi Iwai
2020-12-21 17:15 ` Kai-Heng Feng
2020-12-21 17:56 ` [Nouveau] " Ilia Mirkin
2020-12-22 2:49 ` Kai-Heng Feng
2021-01-04 13:20 ` Karol Herbst
2021-04-10 15:51 ` Roy Spliet
2021-04-10 19:23 ` Lukas Wunner
2021-04-10 20:48 ` Roy Spliet
2021-04-12 19:06 ` Aaron Plattner
2021-04-12 19:36 ` Roy Spliet
2021-04-12 20:00 ` Aaron Plattner
2021-04-12 20:03 ` Ilia Mirkin
2021-04-13 0:10 ` Karol Herbst
2021-04-13 8:24 ` Roy Spliet
2021-04-13 9:48 ` Karol Herbst
2021-04-13 11:17 ` Roy Spliet
2021-04-13 11:49 ` Karol Herbst
2021-06-25 12:45 ` Paul Cercueil
2021-07-02 17:59 ` Paul Cercueil
2021-07-02 18:26 ` Paul Cercueil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=FKWBLQ.XJO3QQ2ZO2W23@canonical.com \
--to=kai.heng.feng@canonical.com \
--cc=alexander.deucher@amd.com \
--cc=alsa-devel@alsa-project.org \
--cc=guennadi.liakhovetski@linux.intel.com \
--cc=kai.vehmanen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=rppt@kernel.org \
--cc=tiwai@suse.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).