From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andrew Callan Subject: Re: Alsa 1.0.13 (and others) does not work on ALC880 Date: Sat, 19 May 2007 02:08:14 -0500 (CDT) Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from integrity.ugnet.org (integrity.ugnet.org [208.251.149.193]) by alsa0.perex.cz (Postfix) with ESMTP id 73C4C24475 for ; Sat, 19 May 2007 08:08:47 +0200 (CEST) Received: from integrity.ugnet.org (localhost [127.0.0.1]) by integrity.ugnet.org (8.12.11.20060308/8.12.10) with ESMTP id l4J78EP0009056 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO) for ; Sat, 19 May 2007 02:08:34 -0500 Received: from localhost (acc@localhost) by integrity.ugnet.org (8.12.11.20060308/8.12.6/Submit) with ESMTP id l4J78E2A009053 for ; Sat, 19 May 2007 02:08:14 -0500 List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org I have been without sound using Fedora Core ever since the 2.6.16 or 2.6.17 kernel update (2.6.16 crashed during initialization, so I could not tell whether sound worked or not). It had worked well through the 2.6.15 Fedora kernels. I finally sat down tonight to work the problem as hard as I could and happened upon Eric and Tobin's timely exchange. First, simply adding probe_mask=1 to the snd-hda-intel options worked for me as well; I did not end up having to specify a specific model. Second, I too was seeing a LONG hang when trying to do: cat /proc/asound/card0/codec#0 but now with the probe_mask=1, I do not see this. If it helps, the alsa-info.sh output for my system is at http://pastebin.ca/496293 If it makes any difference, I'm not sure which model I had specified on the modprobe line at the time I captured this output. One thing I do notice is that after adding probe_mask=1, aplay -l does not show the Si3054 Modem which shows up in the alsa-info output. Thanks for the help you gave in the thread with Eric. Andrew