From: "Marek Marczykowski-Górecki" <marmarek@invisiblethingslab.com>
To: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Takashi Iwai <tiwai@suse.de>,
alsa-devel@alsa-project.org, Alex Xu <alex_y_xu@yahoo.ca>,
Harald Arnesen <harald@skogtun.org>,
Jaroslav Kysela <perex@perex.cz>
Subject: Re: Audio output heavily distorted on Xen PV dom0 if not recording (Intel ADL)
Date: Tue, 30 May 2023 03:27:48 +0200 [thread overview]
Message-ID: <ZHVRFK0bKK3rm3FX@mail-itl> (raw)
In-Reply-To: <ZGLH/oATVzX8VvN9@mail-itl>
[-- Attachment #1: Type: text/plain, Size: 2932 bytes --]
On Tue, May 16, 2023 at 02:02:06AM +0200, Marek Marczykowski-Górecki wrote:
> On Mon, May 15, 2023 at 06:56:22PM -0500, Pierre-Louis Bossart wrote:
> >
> >
> >
> > >>> I have a rather interesting issue on HP EliteBook 1040, with Intel ADL
> > >>> HDA. Sometimes (often) audio output is heavily distorted, but then
> > >>> opening pavucontrol or just launching `parecord /dev/null` fixes the issue
> > >>> instantly. But, when the mixer or recording is closed, then few seconds
> > >>> later issue comes back.
> > >>>
> > >>> You can hear this at https://cloud.marmarek.net/s/46prqZnwrqDkBdD
> > >>> Initially recording was running, then about 10s stopped and you can
> > >>> hear the issue few seconds later. Then I starter recording again, and
> > >>> the issue is gone.
> > >>> This is how it should sound: https://youtube.com/watch?v=4Tr0otuiQuU
> > >>> I do not see any kernel messages when issue happens.
> > >>>
> > >>> The issue happens on Linux 6.1.26, 6.2.10, and 6.3.2. I haven't tested
> > >>> other versions. It happens only when running under Xen (in PV dom0). The
> > >>> very same Linux started directly works fine. Full dmesg of both native
> > >>> and Xen boots is at https://gist.github.com/marmarek/548ee79282446344a172109bcd943930
> > >>>
> > >>> When running Linux 6.3.2 there, I noticed that just after boot first
> > >>> playback is okay, but if I start and stop recording it breaks. And then
> > >>> after some time of idle it fixes itself again. I have not observed this
> > >>> behavior on 6.2.10 (it was broken initially too), but I could be also
> > >>> doing some things differently.
> > >>>
> > >>> I have few other ADL-based systems (but not HP), and they do not show
> > >>> this issue, only this HP laptop is affected. Example dmesg from another
> > >>> ADL-based system:
> > >>> https://gist.github.com/marmarek/38c5ba3ec58f9300fbc1842ddc9fa4f5
> >
> > >>
> > >> Could you try to switch to the legacy HD-audio driver (e.g. by passing
> > >> snd_intel_dspcfg.dsp_driver=1 option) and check whether the issue
> > >> persists or not? This will narrow down whether it's SOF-specific
> > >> problem or not, at least.
> > >
> > > This does help! With snd_intel_dspcfg.dsp_driver=1 the issue doesn't
> > > happen anymore, the audio output just works the whole time. But, the
> > > built-in microphone disappeared, only external (unplugged) is listed. I
> > > guess that's kind-of expected.
> >
> > Can you check what happens with a headphone and the SOF driver?
> >
> > The SOF driver doesn't really know/care what is on the other side of the
> > HDaudio bus, so it'd be good to rule-out an amplifier-specific
> > configuration issue.
>
> The same happens with headphones.
Any ideas? In the meantime I tried updating alsa-sof-firmware to 2.2.5,
but it didn't help.
--
Best Regards,
Marek Marczykowski-Górecki
Invisible Things Lab
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
next prev parent reply other threads:[~2023-05-30 1:29 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-15 15:39 Audio output heavily distorted on Xen PV dom0 if not recording (Intel ADL) Marek Marczykowski-Górecki
2023-05-15 20:00 ` Takashi Iwai
2023-05-15 21:16 ` Marek Marczykowski-Górecki
2023-05-15 23:56 ` Pierre-Louis Bossart
2023-05-16 0:02 ` Marek Marczykowski-Górecki
2023-05-30 1:27 ` Marek Marczykowski-Górecki [this message]
2023-08-01 9:59 ` Marek Marczykowski-Górecki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZHVRFK0bKK3rm3FX@mail-itl \
--to=marmarek@invisiblethingslab.com \
--cc=alex_y_xu@yahoo.ca \
--cc=alsa-devel@alsa-project.org \
--cc=harald@skogtun.org \
--cc=perex@perex.cz \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).