From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
To: Sriram Periyasamy <sriramx.periyasamy@intel.com>,
ALSA ML <alsa-devel@alsa-project.org>,
Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>,
Liam Girdwood <liam.r.girdwood@linux.intel.com>,
Sanyog Kale <sanyog.r.kale@intel.com>,
Patches Audio <patches.audio@intel.com>
Subject: Re: [PATCH] ASoC: Intel: Power down links before turning off display audio power
Date: Fri, 22 Jun 2018 11:42:24 -0500 [thread overview]
Message-ID: <a1991293-7d83-8aa8-6a2d-85d06fad7adb@linux.intel.com> (raw)
In-Reply-To: <1529659551-22902-1-git-send-email-sriramx.periyasamy@intel.com>
On 6/22/18 4:25 AM, Sriram Periyasamy wrote:
> On certain platforms, Display HDMI HDA codec was not going to sleep state
> after the use when links are powered down after turning off the display
> power. As per the HW recommendation, links are powered down before turning
> off the display power to ensure that the codec goes to sleep state.
The change looks ok, I am still not clear on display power management.
snd_hdac_display_power is called both from hdac_hdmi.c and skl.c in the
respective probe/suspend/resume routines, wondering if this is redundant
or intentional.
>
> Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com>
> Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>
> ---
> sound/soc/codecs/hdac_hdmi.c | 12 +++++-------
> sound/soc/intel/skylake/skl.c | 11 ++++++-----
> 2 files changed, 11 insertions(+), 12 deletions(-)
>
> diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c
> index 84f7a7a36e4b..b78fd84bf591 100644
> --- a/sound/soc/codecs/hdac_hdmi.c
> +++ b/sound/soc/codecs/hdac_hdmi.c
> @@ -2127,12 +2127,6 @@ static int hdac_hdmi_runtime_suspend(struct device *dev)
> */
> snd_hdac_codec_read(hdev, hdev->afg, 0, AC_VERB_SET_POWER_STATE,
> AC_PWRST_D3);
> - err = snd_hdac_display_power(bus, false);
> - if (err < 0) {
> - dev_err(bus->dev, "Cannot turn on display power on i915\n");
> - return err;
> - }
> -
> hlink = snd_hdac_ext_bus_get_link(ebus, dev_name(dev));
> if (!hlink) {
> dev_err(dev, "hdac link not found\n");
> @@ -2141,7 +2135,11 @@ static int hdac_hdmi_runtime_suspend(struct device *dev)
>
> snd_hdac_ext_bus_link_put(ebus, hlink);
>
> - return 0;
> + err = snd_hdac_display_power(bus, false);
> + if (err < 0)
> + dev_err(bus->dev, "Cannot turn off display power on i915\n");
> +
> + return err;
> }
>
> static int hdac_hdmi_runtime_resume(struct device *dev)
> diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c
> index 670ff9aaca55..c62e474717ff 100644
> --- a/sound/soc/intel/skylake/skl.c
> +++ b/sound/soc/intel/skylake/skl.c
> @@ -762,6 +762,12 @@ static void skl_probe_work(struct work_struct *work)
> }
> }
>
> + /*
> + * we are done probing so decrement link counts
> + */
> + list_for_each_entry(hlink, &ebus->hlink_list, list)
> + snd_hdac_ext_bus_link_put(ebus, hlink);
> +
> if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) {
> err = snd_hdac_display_power(bus, false);
> if (err < 0) {
> @@ -771,11 +777,6 @@ static void skl_probe_work(struct work_struct *work)
> }
> }
>
> - /*
> - * we are done probing so decrement link counts
> - */
> - list_for_each_entry(hlink, &ebus->hlink_list, list)
> - snd_hdac_ext_bus_link_put(ebus, hlink);
>
> /* configure PM */
> pm_runtime_put_noidle(bus->dev);
>
next prev parent reply other threads:[~2018-06-22 16:42 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-22 9:25 [PATCH] ASoC: Intel: Power down links before turning off display audio power Sriram Periyasamy
2018-06-22 16:42 ` Pierre-Louis Bossart [this message]
2018-06-22 17:14 ` Takashi Iwai
2018-06-25 8:53 ` Sriram Periyasamy
2018-06-25 9:08 ` Takashi Iwai
2018-06-25 9:23 ` Sriram Periyasamy
2018-06-25 9:53 ` Takashi Iwai
2018-06-25 14:51 ` Sriram Periyasamy
2018-06-25 15:18 ` Takashi Iwai
2018-06-26 11:24 ` Sriram Periyasamy
2018-06-26 11:33 ` Takashi Iwai
2018-06-27 8:35 ` Sriram Periyasamy
2018-06-27 8:48 ` Takashi Iwai
2018-06-27 9:17 ` Sriram Periyasamy
2018-06-27 9:34 ` Takashi Iwai
2018-06-27 10:57 ` Sriram Periyasamy
2018-06-27 11:24 ` Takashi Iwai
-- strict thread matches above, loose matches on Subject: below --
2018-11-09 17:37 Pierre-Louis Bossart
2018-11-09 19:37 ` Pierre-Louis Bossart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a1991293-7d83-8aa8-6a2d-85d06fad7adb@linux.intel.com \
--to=pierre-louis.bossart@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=liam.r.girdwood@linux.intel.com \
--cc=patches.audio@intel.com \
--cc=sanyog.r.kale@intel.com \
--cc=sriramx.periyasamy@intel.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).