[ALSA - driver 0001733]: Intel HDA Modem ?

bugtrack
2006-03-11T18:03:53Z

Last Modified: 03-11-2006 19:03 CET
======================================================================
Summary: Intel HDA Modem ?
Description:
I want to use my HDA Softmodem in Linux, is there any development on a HDA
Modem Module ?

cat /proc/asound/card0/codec#1 gives me:
Codec: Generic 11c1 ID 3026
Address: 1
Vendor Id: 0x11c13026
Subsystem Id: 0x11c13026
Revision Id: 0x70500

In Windows it is called "Agere Systems HDA Modem" (Conexant ?)

If there is development on this i would like to participate to get it
going, because i dont't want to have a windows-installation on my Notebook
(Acer TravelMate 8104) just for getting my mails at my parents house,
where there is only analog telephone.
======================================================================

----------------------------------------------------------------------
kratz00 - 03-11-06 15:19
----------------------------------------------------------------------
@chrmue

i can't get it to work and any help would be appreciated

aplay -l output is nearly the same
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: AD198x Digital [AD198x Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]
Subdevices: 1/1
Subdevice #0: subdevice #0

./slmodemd -a hw:0
SmartLink Soft Modem: version 2.9.10 Mar 10 2006 23:39:11
symbolic link `/dev/ttySL0' -> `/dev/pts/4' created.
modem `hw:0' created. TTY is `/dev/pts/4'
Use `/dev/ttySL0' as modem device, Ctrl+C for termination.

but wvdial dosen't work
do you have any special mixer settings or other hints i could try?

wvdial output:
--> Cannot open /dev/ttySL0: Cannot get information for serial port.

the device exists and i'm running this command as root user
it's a symlink and /dev/pts/4 does also exist

----------------------------------------------------------------------
rlrevell - 03-11-06 19:03
----------------------------------------------------------------------
You are doing it wrong. The modem is device hw:0,6:

card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]
^^^^^^ ^^^^^^^^

But you tell it to use device 0:

./slmodemd -a hw:0

Try ./slmodemd -a hw:0,6