From: vishnu <vravulap@amd.com>
To: "RAVULAPATI, VISHNU VARDHAN RAO" <Vishnuvardhanrao.Ravulapati@amd.com>
Cc: "moderated list:SOUND - SOC LAYER / DYNAMIC AUDIO POWER
MANAGEM..." <alsa-devel@alsa-project.org>,
Maruthi Srinivas Bayyavarapu <Maruthi.Bayyavarapu@amd.com>,
open list <linux-kernel@vger.kernel.org>,
Takashi Iwai <tiwai@suse.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
"Mukunda, Vijendar" <Vijendar.Mukunda@amd.com>,
"Deucher, Alexander" <Alexander.Deucher@amd.com>
Subject: Re: [alsa-devel] [PATCH 4/7] ASoC: amd: add ACP3x TDM mode support
Date: Fri, 25 Oct 2019 07:06:54 +0000 [thread overview]
Message-ID: <ae25c498-dac1-ec27-cd47-622d94d45e5b@amd.com> (raw)
In-Reply-To: <1571432760-3008-4-git-send-email-Vishnuvardhanrao.Ravulapati@amd.com>
Hi Mark,
Any updates on this patch.
Regards,
Vishnu
On 19/10/19 2:35 AM, Ravulapati Vishnu vardhan rao wrote:
> ACP3x I2S (CPU DAI) can act in normal I2S and TDM modes. Added support
> for TDM mode. Desired mode can be selected from ASoC machine driver.
>
> Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
> ---
> sound/soc/amd/raven/acp3x-i2s.c | 51 +++++++++++++++++++++++++++++++++--------
> sound/soc/amd/raven/acp3x.h | 2 ++
> 2 files changed, 43 insertions(+), 10 deletions(-)
>
> diff --git a/sound/soc/amd/raven/acp3x-i2s.c b/sound/soc/amd/raven/acp3x-i2s.c
> index b7f610f..7e22d22 100644
> --- a/sound/soc/amd/raven/acp3x-i2s.c
> +++ b/sound/soc/amd/raven/acp3x-i2s.c
> @@ -43,7 +43,8 @@ static int acp3x_i2s_set_tdm_slot(struct snd_soc_dai *cpu_dai, u32 tx_mask,
> u32 rx_mask, int slots, int slot_width)
> {
> u32 val = 0;
> - u16 slot_len;
> + u32 mode = 0;
> + u16 slot_len, flen;
>
> struct i2s_dev_data *adata = snd_soc_dai_get_drvdata(cpu_dai);
>
> @@ -64,16 +65,46 @@ static int acp3x_i2s_set_tdm_slot(struct snd_soc_dai *cpu_dai, u32 tx_mask,
> return -EINVAL;
> }
>
> - val = rv_readl(adata->acp3x_base + mmACP_BTTDM_ITER);
> - rv_writel((val | 0x2), adata->acp3x_base + mmACP_BTTDM_ITER);
> - val = rv_readl(adata->acp3x_base + mmACP_BTTDM_IRER);
> - rv_writel((val | 0x2), adata->acp3x_base + mmACP_BTTDM_IRER);
> + /* Enable I2S / BT channels TDM and respective
> + * I2S/BT`s TX/RX Formats frame lengths.
> + */
> + flen = (FRM_LEN | (slots << 15) | (slot_len << 18));
>
> - val = (FRM_LEN | (slots << 15) | (slot_len << 18));
> - rv_writel(val, adata->acp3x_base + mmACP_BTTDM_TXFRMT);
> - rv_writel(val, adata->acp3x_base + mmACP_BTTDM_RXFRMT);
> -
> - adata->tdm_fmt = val;
> + if (adata->substream_type == SNDRV_PCM_STREAM_PLAYBACK) {
> + switch (adata->i2s_instance) {
> + case I2S_BT_INSTANCE:
> + val = rv_readl(adata->acp3x_base + mmACP_BTTDM_ITER);
> + rv_writel((val | 0x2),
> + adata->acp3x_base + mmACP_BTTDM_ITER);
> + rv_writel(flen,
> + adata->acp3x_base + mmACP_BTTDM_TXFRMT);
> + break;
> + case I2S_SP_INSTANCE:
> + val = rv_readl(adata->acp3x_base + mmACP_I2STDM_ITER);
> + rv_writel((val | 0x2),
> + adata->acp3x_base + mmACP_I2STDM_ITER);
> + rv_writel(flen,
> + adata->acp3x_base + mmACP_I2STDM_TXFRMT);
> + }
> + } else {
> + switch (adata->i2s_instance) {
> + case I2S_BT_INSTANCE:
> + val = rv_readl(adata->acp3x_base + mmACP_BTTDM_IRER);
> + rv_writel((val | 0x2),
> + adata->acp3x_base + mmACP_BTTDM_IRER);
> + rv_writel(flen,
> + adata->acp3x_base + mmACP_BTTDM_RXFRMT);
> + break;
> + case I2S_SP_INSTANCE:
> + default:
> + val = rv_readl(adata->acp3x_base + mmACP_I2STDM_IRER);
> + rv_writel((val | 0x2),
> + adata->acp3x_base + mmACP_I2STDM_IRER);
> + rv_writel(flen,
> + adata->acp3x_base + mmACP_I2STDM_RXFRMT);
> + }
> + }
> + adata->tdm_fmt = flen;
> return 0;
> }
>
> diff --git a/sound/soc/amd/raven/acp3x.h b/sound/soc/amd/raven/acp3x.h
> index b1990c9..dba7065 100644
> --- a/sound/soc/amd/raven/acp3x.h
> +++ b/sound/soc/amd/raven/acp3x.h
> @@ -76,6 +76,8 @@ struct i2s_dev_data {
> bool tdm_mode;
> unsigned int i2s_irq;
> u32 tdm_fmt;
> + u16 i2s_instance;
> + u32 substream_type;
> void __iomem *acp3x_base;
> struct snd_pcm_substream *play_stream;
> struct snd_pcm_substream *capture_stream;
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next prev parent reply other threads:[~2019-10-25 7:08 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-18 21:05 [alsa-devel] [PATCH 1/7] ASoC: amd: Create multiple I2S platform device endpoints Ravulapati Vishnu vardhan rao
2019-10-18 21:05 ` [alsa-devel] [PATCH 2/7] ASoC: amd: Refactoring of DAI from DMA driver Ravulapati Vishnu vardhan rao
2019-10-25 7:06 ` vishnu
2019-10-18 21:05 ` [alsa-devel] [PATCH 3/7] ASoC: amd: Enabling I2S instance in DMA and DAI Ravulapati Vishnu vardhan rao
2019-10-24 11:40 ` Mark Brown
2019-10-25 6:53 ` vishnu
2019-10-25 9:55 ` Mark Brown
2019-10-25 10:01 ` vishnu
2019-10-25 6:57 ` vishnu
2019-10-18 21:05 ` [alsa-devel] [PATCH 4/7] ASoC: amd: add ACP3x TDM mode support Ravulapati Vishnu vardhan rao
2019-10-25 7:06 ` vishnu [this message]
2019-10-18 21:05 ` [alsa-devel] [PATCH 5/7] ASoC: amd: handle ACP3x i2s-sp watermark interrupt Ravulapati Vishnu vardhan rao
2019-10-25 7:07 ` vishnu
2019-10-18 21:05 ` [alsa-devel] [PATCH 6/7] ASoC: amd: ACP powergating should be done by controller Ravulapati Vishnu vardhan rao
2019-10-18 10:39 ` Dan Carpenter
2019-11-06 14:11 ` vishnu
2019-10-18 21:05 ` [alsa-devel] [PATCH 7/7] ASoC: amd: Added ACP3x system resume and runtime pm ops Ravulapati Vishnu vardhan rao
2019-10-25 7:05 ` [alsa-devel] [PATCH 1/7] ASoC: amd: Create multiple I2S platform device endpoints vishnu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ae25c498-dac1-ec27-cd47-622d94d45e5b@amd.com \
--to=vravulap@amd.com \
--cc=Alexander.Deucher@amd.com \
--cc=Maruthi.Bayyavarapu@amd.com \
--cc=Vijendar.Mukunda@amd.com \
--cc=Vishnuvardhanrao.Ravulapati@amd.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox