From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0002198]: No sound out of the built in speakers, but from headphones on a Apple MacBook Pro
Date: Thu, 6 Jul 2006 15:46:33 +0200 [thread overview]
Message-ID: <af7bb234474afde6e17d959ce9823c50@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2198>
======================================================================
Reported By: enlighter
Assigned To: tiwai
======================================================================
Project: ALSA - driver
Issue ID: 2198
Category: PCI - hda-intel
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
Distribution: Gentoo Linux
Kernel Version: 2.6.16.16
======================================================================
Date Submitted: 06-09-2006 12:09 CEST
Last Modified: 07-06-2006 15:46 CEST
======================================================================
Summary: No sound out of the built in speakers, but from
headphones on a Apple MacBook Pro
Description:
Hi,
this error occours on all macbook pros! (see www.mactel-linux.org). Sound
comes only out of the headphones or out of line-out, but the internal
speakers keep mute. I cannot unmute them using the mixer (alsamixer,
kmix). I also tried a rc version of linux-2.6.17 with the same result.
I also tried to load the snd-hda-intel module with "model=laptop" and
"model=laptop-eapd".
======================================================================
----------------------------------------------------------------------
Gendo - 07-06-06 03:13
----------------------------------------------------------------------
tiwai, here is the output from the macbook. I will get the iMac output and
post it soon
Codec: SigmaTel STAC9221 A1
Address: 0
Vendor Id: 0x83847680
Subsystem Id: 0x100
Revision Id: 0x103401
Default PCM: rates 0x7e0, bits 0x0e, types 0x1
Default Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=1
Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x5f 0x5f]
Power: 0x0
Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0xff 0xff]
Power: 0x0
Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x6f 0x6a]
Power: 0x0
Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x72 0x72]
Power: 0x0
Node 0x06 [Audio Input] wcaps 0x1d0541: Stereo
Power: 0x0
Connection: 1
0x17
Node 0x07 [Audio Input] wcaps 0x1d0541: Stereo
Power: 0x0
Connection: 1
0x18
Node 0x08 [Audio Output] wcaps 0x40211: Stereo Digital
PCM: rates 0x7e0, bits 0x0e, types 0x5
Node 0x09 [Audio Input] wcaps 0x140311: Stereo Digital
PCM: rates 0x160, bits 0x0e, types 0x5
Connection: 1
0x11
Node 0x0a [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x08173f: IN OUT HP Detect
Pin Default 0x0101e022: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = White
Pin-ctls: 0x40: OUT
Connection: 1
0x02
Node 0x0b [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x081737: IN OUT Detect
Pin Default 0x90afe112: [Fixed] Mic at Int N/A
Conn = Other, Color = White
Pin-ctls: 0x24: IN
Connection: 1
0x04
Node 0x0c [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x081737: IN OUT Detect
Pin Default 0x9017e121: [Fixed] Speaker at Int N/A
Conn = Analog, Color = White
Pin-ctls: 0x20: IN
Connection: 1
0x03
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x08173f: IN OUT HP Detect
Pin Default 0x4180e100: [N/A] Line In at Ext Rear
Conn = Unknown, Color = White
Pin-ctls: 0x40: OUT
Connection: 1
0x02
Node 0x0e [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x0824: IN Detect
Pin Default 0x41f0e032: [N/A] Other at Ext Rear
Conn = Unknown, Color = White
Pin-ctls: 0x20: IN
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0837: IN OUT Detect
Pin Default 0x0181e031: [Jack] Line In at Ext Rear
Conn = 1/8, Color = White
Pin-ctls: 0x20: IN
Connection: 1
0x05
Node 0x10 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x1145f023: [Jack] SPDIF Out at Int Rear
Conn = Optical, Color = Other
Pin-ctls: 0x40: OUT
Connection: 3
0x08* 0x17 0x19
Node 0x11 [Pin Complex] wcaps 0x430681: Stereo Digital
Pincap 0x0810024: IN EAPD Detect
Pin Default 0x11c5c032: [Jack] SPDIF In at Int Rear
Conn = Optical, Color = UNKNOWN
Pin-ctls: 0x20: IN
Power: 0x0
Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x02 0x02]
Connection: 7
0x0e 0x15 0x0f* 0x0b 0x0c 0x0d 0x0a
Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 7
0x0e 0x15* 0x0f 0x0b 0x0c 0x0d 0x0a
Node 0x14 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0
Amp-Out vals: [0x00]
Node 0x15 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x4180e100: [N/A] Line In at Ext Rear
Conn = Unknown, Color = White
Pin-ctls: 0x00:
Node 0x16 [Volume Knob Widget] wcaps 0x600000: Mono
Node 0x17 [Audio Selector] wcaps 0x300903: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x0a 0x0a]
Connection: 1
0x12
Node 0x18 [Audio Selector] wcaps 0x300903: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x80 0x80]
Connection: 1
0x13
Node 0x19 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
Node 0x1a [Audio Output] wcaps 0x30201: Stereo Digital
Node 0x1b [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x4180e100: [N/A] Line In at Ext Rear
Conn = Unknown, Color = White
Pin-ctls: 0x00:
Connection: 1
0x1a
----------------------------------------------------------------------
tiwai - 07-06-06 15:46
----------------------------------------------------------------------
Is the state got when HP jack is plugged or unplugged?
The node 0x0c looks like the built-in speaker pin, and it's configured as
input. Usually, it's turned to be output when HP is unplugged.
Issue History
Date Modified Username Field Change
======================================================================
06-09-06 12:09 enlighter New Issue
06-09-06 12:09 enlighter Distribution => Gentoo Linux
06-09-06 12:09 enlighter Kernel Version => 2.6.16.16
06-14-06 09:47 enlighter Issue Monitored: enlighter
06-18-06 09:27 enlighter Note Added: 0010297
06-18-06 09:29 enlighter Note Added: 0010298
06-25-06 20:17 enlighter Note Added: 0010518
06-26-06 16:08 tiwai Note Added: 0010541
06-26-06 16:20 enlighter Note Added: 0010546
06-26-06 16:34 tiwai Note Added: 0010547
06-29-06 17:48 tiwai Note Added: 0010676
07-05-06 04:18 Gendo Note Added: 0010830
07-05-06 15:21 tiwai Note Added: 0010838
07-06-06 03:13 Gendo Note Added: 0010848
07-06-06 15:46 tiwai Note Added: 0010861
======================================================================
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
next reply other threads:[~2006-07-06 13:46 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-06 13:46 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-07-07 3:21 [ALSA - driver 0002198]: No sound out of the built in speakers, but from headphones on a Apple MacBook Pro bugtrack
2006-07-06 16:20 bugtrack
2006-07-06 16:14 bugtrack
2006-07-06 1:13 bugtrack
2006-07-05 13:21 bugtrack
2006-07-05 2:18 bugtrack
2006-06-29 15:48 bugtrack
2006-06-26 14:34 bugtrack
2006-06-26 14:20 bugtrack
2006-06-26 14:08 bugtrack
2006-06-25 18:17 bugtrack
2006-06-18 7:29 bugtrack
2006-06-18 7:27 bugtrack
2006-06-09 10:09 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=af7bb234474afde6e17d959ce9823c50@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox