From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0001064]: snd_hda_intel does not recognize acl880 sound chip
Date: Sun, 12 Jun 2005 20:52:41 +0200 [thread overview]
Message-ID: <b571c8aa3a19cfe74a1d91d2ca8091ca@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1064>
======================================================================
Reported By: jwiegley
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1064
Category: PCI - hda-intel
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian-pure64
Kernel Version: 2.6.12-rc2
======================================================================
Date Submitted: 04-18-2005 20:42 CEST
Last Modified: 06-12-2005 20:52 CEST
======================================================================
Summary: snd_hda_intel does not recognize acl880 sound chip
Description:
I bought a Shuttle ST20G5 box. Sound doesn't get detected or
seem to work with manual load.
chipset:
ATI Xpress 200 northbridge
ULI 1573 southbridge
The documentation says the sound is:
Realtek ALC880
alsaconf detects nothing
manually loading snd_hda_intel also doesn't print anything in the
log files; though it does seem to load all the snd stuff just fine.
======================================================================
----------------------------------------------------------------------
tiwai - 04-19-05 17:38
----------------------------------------------------------------------
It seems that the device has an unknown controller by ALI.
Try to add the corresponding PCI IDs (10b9:5461) to azx_ids[] in
pci/hda_intel.c, in case the chipset is compatible with Intel ICH6/7.
----------------------------------------------------------------------
jwiegley - 06-12-05 20:52
----------------------------------------------------------------------
I did as you requested and added the PCI ID.
When the driver loads during boot all I get is
tons of "azx_get_response timeout" lines on my
console and I have to sysrq-b to reboot to a
different kernel.
I also got the 1.0.9rc4a source after trolling
the web and it does the exact same thing.
Any ideas on how to get this chip supported?
Issue History
Date Modified Username Field Change
======================================================================
04-18-05 20:42 jwiegley New Issue
04-18-05 20:42 jwiegley File Added: ST20G5lspci.txt
04-18-05 20:42 jwiegley Distribution => Debian-pure64
04-18-05 20:42 jwiegley Kernel Version => 2.6.12-rc2
04-19-05 17:34 tiwai Category PCI - azx => PCI -
hda-intel
04-19-05 17:38 tiwai Note Added: 0004523
06-09-05 16:20 Ballbreaker Issue Monitored: Ballbreaker
06-12-05 20:52 jwiegley Note Added: 0005001
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput
a projector? How fast can you ride your desk chair down the office luge track?
If you want to score the big prize, get to know the little guy.
Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20
next reply other threads:[~2005-06-12 18:52 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-12 18:52 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-11-22 18:24 [ALSA - driver 0001064]: snd_hda_intel does not recognize acl880 sound chip bugtrack
2005-08-25 12:59 bugtrack
2005-08-25 10:15 bugtrack
2005-08-25 9:57 bugtrack
2005-08-23 12:40 bugtrack
2005-07-08 15:04 bugtrack
2005-07-08 10:03 bugtrack
2005-07-04 21:39 bugtrack
2005-06-15 12:39 bugtrack
2005-04-19 15:38 bugtrack
2005-04-19 15:34 bugtrack
2005-04-18 18:42 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b571c8aa3a19cfe74a1d91d2ca8091ca@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox