Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0001748]: sound driver will not load (CS4237B chip)
Date: Sat, 21 Jan 2006 03:48:50 +0100	[thread overview]
Message-ID: <bb72166739027a93f56efed5bc73a16d@bugtrack.alsa-project.org> (raw)


A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1748> 
======================================================================
Reported By:                briand
Assigned To:                
======================================================================
Project:                    ALSA - driver
Issue ID:                   1748
Category:                   ISA - cs4236
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     new
Distribution:               Fedora Core 3
Kernel Version:             2.6.9-1.667
======================================================================
Date Submitted:             01-14-2006 23:47 CET
Last Modified:              01-21-2006 03:48 CET
======================================================================
Summary:                    sound driver will not load (CS4237B chip)
Description: 
with BIOS set to "PnPOS" for sound chip:
  `/sbin/modprobe snd-cs4236` produces the following on stdout:
  "FATAL: Error inserting snd_cs4236 \
   (/lib/modules/2.6.9-1.667/kernel/sound/isa/cs423x/snd-cs4236.ko): \
   No such device"

   -- occurs with 1.0.10, 1.0.11rc1, and (currently) 1.0.11rc2
   alsaconf reports I have no sound card.
   cat /proc/asound/cards reports I have no sound card.


with BIOS set to "Enable" for sound chip:

 `/sbin/modprobe snd-cs4236 port=0x530 cport=0x538 isapnp=0 dma1=1 dma2=0
irq=5`

  ..produces nothing on stdout/stderr, but the laptop speakers click once,
and dmesg shows:

 "ALSA /path/to/alsa/source/isa/cs423x/cs4236_lib.c:305: CS4236+ chip
detected, but control port 0x538 is not valid"

  - that message shows up in dmesg regardless of what i specify for
'cport=' parameter (with, of course, the corresponding port value in the
error message).

  alsaconf seems to find the card, test the card, and reports all is fine;
offers to modify /etc/modprobe.conf (with parameters shown above), and
congratulates me.
  cat /proc/asound/cards reports I have no sound card.


In looking at cs4236_lib.c, lines 301-307:

        ver1 = snd_cs4236_ctrl_in(chip, 1);
        ver2 = snd_cs4236_ext_in(chip, CS4236_VERSION);
        snd_printdd("CS4236: [0x%lx] C1 (version) = 0x%x, ext = 0x%x\n",
cport, ver1, ver2);
        if (ver1 != ver2) {
                snd_printk("CS4236+ chip detected, but control port 0x%lx
is not valid\n", cport);
                snd_device_free(card, chip);
                return -ENODEV;
        }

  ...it looks like ver1 and ver2 aren't agreeing.  ;)   Okay, so I
experimented a bit.  I commented out (#if 0 ... #endif) the if (ver1 !=
ver2) {...} block, and added:

   snd_printk("CS4236: [0x%lx] C1 (version) = 0x%x, ext = 0x%x\n", cport,
ver1, ver2);

 ...recompiled, reinstalled... and then:

  `modprobe snd-cs4236 port=0x530 cport=0x538 isapnp=0 dma1=1 dma2=0
irq=5`

  results in:

   /dev/dsp, /dev/audio, /dev/snd/* all appear, laptop speakers click once
(as before), followed quickly by a <blart>, and we're on our way...
almost.

  my shorthand dmesg (printk) shows me that the driver was unloading
because 0xFF did not equal 0xE8. (I'm going from memory here.  I'm
positive that the value of "ver1" was 0xFF -- not quite sure about "ver2",
but it's close.  ..it definitely wasn't 0xFF (obviously!) which is why the
driver load aborted).

  cat /proc/asound/cards reports card 0 is a CS4237B at IRQ 5, DMA 1,0

  in KDE, kmix loads and allows me to play with buttons/sliders - I can
get CD audio to play out the laptop speakers, but other audio does not
work.  xmms will load an mp3 file, but when I click the play button, the
display shows 0:00, and nothing plays.  No sound, and the "progress bar"
and "time remaining" stay at 0.

  in terminal, `alsamixer` results in a segmentation fault.

  ..incidentally, in this "hacked" module, it doesn't really matter what
(reasonable) value I specify for cport= in /etc/modprobe.conf (0x538,
0x120, 0x110 ...).  The result is the same.  kmix allows some adjustment,
cd audio plays, no other sound, and alsamixer seg faults.  No doubt, if I
were to work at it, I could generate a kernel panic with the right
value... ;)




======================================================================

----------------------------------------------------------------------
 briand - 01-21-06 03:48 
----------------------------------------------------------------------
...anybody?

I tried to file-attach the manufacturer's spec sheet for the CS4237B chip
(1.4M), but the upload software here kept crashing during the upload
phase.

Issue History
Date Modified  Username       Field                    Change              
======================================================================
01-14-06 23:47 briand         New Issue                                    
01-14-06 23:47 briand         Distribution              => Fedora Core 3   
01-14-06 23:47 briand         Kernel Version            => 2.6.9-1.667     
01-14-06 23:51 briand         Issue Monitored: briand                      
01-21-06 03:48 briand         Note Added: 0007733                          
======================================================================




-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642

             reply	other threads:[~2006-01-21  2:48 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-01-21  2:48 bugtrack [this message]
  -- strict thread matches above, loose matches on Subject: below --
2006-03-16  7:51 [ALSA - driver 0001748]: sound driver will not load (CS4237B chip) bugtrack
2006-01-29 14:13 bugtrack
2006-01-24 10:16 bugtrack
2006-01-24  1:05 bugtrack
2006-01-24  0:31 bugtrack
2006-01-24  0:17 bugtrack
2006-01-24  0:12 bugtrack
2006-01-23 23:44 bugtrack
2006-01-23  1:15 bugtrack
2006-01-23  0:36 bugtrack
2006-01-23  0:25 bugtrack
2006-01-22 22:09 bugtrack
2006-01-22 21:35 bugtrack
2006-01-22 20:19 bugtrack
2006-01-22 19:52 bugtrack
2006-01-22 18:45 bugtrack
2006-01-22 16:38 bugtrack
2006-01-22  9:18 bugtrack
2006-01-21 13:41 bugtrack
2006-01-21  3:13 bugtrack
2006-01-14 22:47 bugtrack

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bb72166739027a93f56efed5bc73a16d@bugtrack.alsa-project.org \
    --to=bugtrack@alsa-project.org \
    --cc=alsa-devel@alsa-project.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox