[ALSA - driver 0000935]: M-Audio Delta 1010-LT; S/PDIF out = 0Volts on device open

[bugtrack@alsa-project.org]

The following issue has been SUBMITTED.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=935> 
======================================================================
Reported By:                stever8
Assigned To:                
======================================================================
Project:                    ALSA - driver
Issue ID:                   935
Category:                   PCI - ice1712
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     new
Distribution:               Redhat Linux 7.3, modified
Kernel Version:             2.4.26
======================================================================
Date Submitted:             02-23-2005 20:09 CET
Last Modified:              02-23-2005 20:09 CET
======================================================================
Summary:                    M-Audio Delta 1010-LT; S/PDIF out = 0Volts on device
open
Description: 
Our original report:

When we first load the alsa drivers, we see a S/PDIF output signal from
the 1010LT 
on an oscilloscope. A minidisc player also sees this as a valid signal (it
is all 
zeros, silence).

As soon as our program opens the audio device, however, the signal goes
to 0V on the oscilloscope, and the minidisc of course sees "no signal".
We can't output S/PDIF, no matter what settings we try in Envy24control.

Strangely enough, if we do the following, we do get S/PDIF output :
. Plug in an external S/PDIF input source (which is muted so as not to
mix
with our sound).
. In Envy24control, set the Master Clock to "Word Clock". (it doesn't work
if the 
master clock is set to "S/PDIF")


Jaroslav Kysela suggested:
Strange. Could you try to comment lines:
        //if (reset)        
        //        snd_cs8427_reset(cs8427);

in alsa-kernel/i2c/cs8427.c and test if the signal is present after this
change?

Which I did. The S/PDIF signal no longer goes away (it appears on the
scope, and the minidisc player recognizes it as a valid signal) however it
just contains silence.

======================================================================

Issue History
Date Modified  Username       Field                    Change              
======================================================================
02-23-05 20:09 stever8        New Issue                                    
02-23-05 20:09 stever8        Distribution              => Redhat Linux 7.3,
modified
02-23-05 20:09 stever8        Kernel Version            => 2.4.26          
======================================================================




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click