Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
To: Brent Lu <brent.lu@intel.com>, alsa-devel@alsa-project.org
Cc: cezary.rojewski@intel.com, harshapriya.n@intel.com,
	"Subhransu S . Prusty" <subhransu.s.prusty@intel.com>,
	yang.jie@linux.intel.com, liam.r.girdwood@linux.intel.com,
	mac.chiang@intel.com, broonie@kernel.org, naveen.m@intel.com,
	yung-chuan.liao@linux.intel.com
Subject: Re: [alsa-devel] [PATCH v2] ASoC: Intel: eve: Enable mclk and ssp sclk early
Date: Mon, 14 Oct 2019 13:40:09 -0500	[thread overview]
Message-ID: <be3ed1bd-be46-7f6f-fdff-c20ed2dae616@linux.intel.com> (raw)
In-Reply-To: <1571070480-25666-1-git-send-email-brent.lu@intel.com>



On 10/14/19 11:28 AM, Brent Lu wrote:
> From: Naveen M <naveen.m@intel.com>
> 
> rt5663 and rt5514 needs mclk/sclk early to synchronize its internal
> clocks.

Thanks, this looks quite similar to the changes from kbl_rt5663_max98927 so

Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

> 
> Signed-off-by: Naveen M <naveen.m@intel.com>
> Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
> Signed-off-by: Brent Lu <brent.lu@intel.com>
> ---
>   sound/soc/intel/boards/Kconfig                     |  1 +
>   .../soc/intel/boards/kbl_rt5663_rt5514_max98927.c  | 94 ++++++++++++++++++++++
>   2 files changed, 95 insertions(+)
> 
> diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig
> index 5c27f7a..5e0e7db 100644
> --- a/sound/soc/intel/boards/Kconfig
> +++ b/sound/soc/intel/boards/Kconfig
> @@ -320,6 +320,7 @@ config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH
>           select SND_SOC_RT5514_SPI
>           select SND_SOC_MAX98927
>           select SND_SOC_HDAC_HDMI
> +	select SND_SOC_INTEL_SKYLAKE_SSP_CLK
>           help
>             This adds support for ASoC Onboard Codec I2S machine driver. This will
>             create an alsa sound card for RT5663 + RT5514 + MAX98927.
> diff --git a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
> index 74dda87..dc09a85 100644
> --- a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
> +++ b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
> @@ -22,6 +22,9 @@
>   #include "../../codecs/rt5514.h"
>   #include "../../codecs/rt5663.h"
>   #include "../../codecs/hdac_hdmi.h"
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/clkdev.h>
>   
>   #define KBL_REALTEK_CODEC_DAI "rt5663-aif"
>   #define KBL_REALTEK_DMIC_CODEC_DAI "rt5514-aif1"
> @@ -50,6 +53,8 @@ struct kbl_codec_private {
>   	struct snd_soc_jack kabylake_headset;
>   	struct list_head hdmi_pcm_list;
>   	struct snd_soc_jack kabylake_hdmi[2];
> +	struct clk *mclk;
> +	struct clk *sclk;
>   };
>   
>   enum {
> @@ -71,6 +76,61 @@ static const struct snd_kcontrol_new kabylake_controls[] = {
>   	SOC_DAPM_PIN_SWITCH("DMIC"),
>   };
>   
> +static int platform_clock_control(struct snd_soc_dapm_widget *w,
> +			struct snd_kcontrol *k, int  event)
> +{
> +	struct snd_soc_dapm_context *dapm = w->dapm;
> +	struct snd_soc_card *card = dapm->card;
> +	struct kbl_codec_private *priv = snd_soc_card_get_drvdata(card);
> +	int ret = 0;
> +
> +	/*
> +	 * MCLK/SCLK need to be ON early for a successful synchronization of
> +	 * codec internal clock. And the clocks are turned off during
> +	 * POST_PMD after the stream is stopped.
> +	 */
> +	switch (event) {
> +	case SND_SOC_DAPM_PRE_PMU:
> +		/* Enable MCLK */
> +		ret = clk_set_rate(priv->mclk, 24000000);
> +		if (ret < 0) {
> +			dev_err(card->dev, "Can't set rate for mclk, err: %d\n",
> +				ret);
> +			return ret;
> +		}
> +
> +		ret = clk_prepare_enable(priv->mclk);
> +		if (ret < 0) {
> +			dev_err(card->dev, "Can't enable mclk, err: %d\n", ret);
> +			return ret;
> +		}
> +
> +		/* Enable SCLK */
> +		ret = clk_set_rate(priv->sclk, 3072000);
> +		if (ret < 0) {
> +			dev_err(card->dev, "Can't set rate for sclk, err: %d\n",
> +				ret);
> +			clk_disable_unprepare(priv->mclk);
> +			return ret;
> +		}
> +
> +		ret = clk_prepare_enable(priv->sclk);
> +		if (ret < 0) {
> +			dev_err(card->dev, "Can't enable sclk, err: %d\n", ret);
> +			clk_disable_unprepare(priv->mclk);
> +		}
> +		break;
> +	case SND_SOC_DAPM_POST_PMD:
> +		clk_disable_unprepare(priv->mclk);
> +		clk_disable_unprepare(priv->sclk);
> +		break;
> +	default:
> +		return 0;
> +	}
> +
> +	return 0;
> +}
> +
>   static const struct snd_soc_dapm_widget kabylake_widgets[] = {
>   	SND_SOC_DAPM_HP("Headphone Jack", NULL),
>   	SND_SOC_DAPM_MIC("Headset Mic", NULL),
> @@ -79,11 +139,15 @@ static const struct snd_soc_dapm_widget kabylake_widgets[] = {
>   	SND_SOC_DAPM_MIC("DMIC", NULL),
>   	SND_SOC_DAPM_SPK("HDMI1", NULL),
>   	SND_SOC_DAPM_SPK("HDMI2", NULL),
> +	SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
> +			platform_clock_control, SND_SOC_DAPM_PRE_PMU |
> +			SND_SOC_DAPM_POST_PMD),
>   
>   };
>   
>   static const struct snd_soc_dapm_route kabylake_map[] = {
>   	/* Headphones */
> +	{ "Headphone Jack", NULL, "Platform Clock" },
>   	{ "Headphone Jack", NULL, "HPOL" },
>   	{ "Headphone Jack", NULL, "HPOR" },
>   
> @@ -92,6 +156,7 @@ static const struct snd_soc_dapm_route kabylake_map[] = {
>   	{ "Right Spk", NULL, "Right BE_OUT" },
>   
>   	/* other jacks */
> +	{ "Headset Mic", NULL, "Platform Clock" },
>   	{ "IN1P", NULL, "Headset Mic" },
>   	{ "IN1N", NULL, "Headset Mic" },
>   
> @@ -643,6 +708,7 @@ static int kabylake_audio_probe(struct platform_device *pdev)
>   {
>   	struct kbl_codec_private *ctx;
>   	struct snd_soc_acpi_mach *mach;
> +	int ret = 0;
>   
>   	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
>   	if (!ctx)
> @@ -658,6 +724,34 @@ static int kabylake_audio_probe(struct platform_device *pdev)
>   		dmic_constraints = mach->mach_params.dmic_num == 2 ?
>   			&constraints_dmic_2ch : &constraints_dmic_channels;
>   
> +	ctx->mclk = devm_clk_get(&pdev->dev, "ssp1_mclk");
> +	if (IS_ERR(ctx->mclk)) {
> +		ret = PTR_ERR(ctx->mclk);
> +		if (ret == -ENOENT) {
> +			dev_info(&pdev->dev,
> +				"Failed to get ssp1_mclk, defer probe\n");
> +			return -EPROBE_DEFER;
> +		}
> +
> +		dev_err(&pdev->dev, "Failed to get ssp1_mclk with err:%d\n",
> +								ret);
> +		return ret;
> +	}
> +
> +	ctx->sclk = devm_clk_get(&pdev->dev, "ssp1_sclk");
> +	if (IS_ERR(ctx->sclk)) {
> +		ret = PTR_ERR(ctx->sclk);
> +		if (ret == -ENOENT) {
> +			dev_info(&pdev->dev,
> +				"Failed to get ssp1_sclk, defer probe\n");
> +			return -EPROBE_DEFER;
> +		}
> +
> +		dev_err(&pdev->dev, "Failed to get ssp1_sclk with err:%d\n",
> +								ret);
> +		return ret;
> +	}
> +
>   	return devm_snd_soc_register_card(&pdev->dev, &kabylake_audio_card);
>   }
>   
> 
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

  reply	other threads:[~2019-10-14 18:41 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-14 16:28 [alsa-devel] [PATCH v2] ASoC: Intel: eve: Enable mclk and ssp sclk early Brent Lu
2019-10-14 18:40 ` Pierre-Louis Bossart [this message]
2019-10-15  9:26 ` [alsa-devel] Applied "ASoC: Intel: eve: Enable mclk and ssp sclk early" to the asoc tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=be3ed1bd-be46-7f6f-fdff-c20ed2dae616@linux.intel.com \
    --to=pierre-louis.bossart@linux.intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=brent.lu@intel.com \
    --cc=broonie@kernel.org \
    --cc=cezary.rojewski@intel.com \
    --cc=harshapriya.n@intel.com \
    --cc=liam.r.girdwood@linux.intel.com \
    --cc=mac.chiang@intel.com \
    --cc=naveen.m@intel.com \
    --cc=subhransu.s.prusty@intel.com \
    --cc=yang.jie@linux.intel.com \
    --cc=yung-chuan.liao@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox