From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0002234]: ISA sscape driver does not find Soundscape Elite
Date: Sun, 6 Aug 2006 02:43:02 +0200 [thread overview]
Message-ID: <be4b02b225081dca66684d9ee0260fb9@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2234>
======================================================================
Reported By: tjallen
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2234
Category: ISA - sscape
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Slackware 10.2
Kernel Version: 2.6.17.1
======================================================================
Date Submitted: 06-26-2006 15:52 CEST
Last Modified: 08-06-2006 02:43 CEST
======================================================================
Summary: ISA sscape driver does not find Soundscape Elite
Description:
The ALSA driver builds fine, both as a module and built-in but
the driver does not find the Soundscape Elite card.
======================================================================
----------------------------------------------------------------------
rankincj - 08-05-06 23:29
----------------------------------------------------------------------
Given that the OSS driver writes these log messages:
<SoundScape (MPU401)> at 0x330 irq 9 dma 1,0
<SoundScape PNP (AD1848)> at 0x534 irq 5 dma 1,1
then maybe you should set dma=1 too.
----------------------------------------------------------------------
tjallen - 08-06-06 02:43
----------------------------------------------------------------------
With modules.conf and modprobe.conf containing the line
options snd-sscape port=0x330 codec_port=0x534 irq=5 mpu_irq=9 dma=1
isapnp=0
the driver reports:
Enter snd_sscape_probe
Enter detect_GA
Exit detect_GA
Exit detect_sscape
sscape: GA hardware detected at 0x330, using IRQ 5, DMA 1
unknown CS chip with version 0x0
sscape: No AD1845 device at 0x534, IRQ 5
Issue History
Date Modified Username Field Change
======================================================================
06-26-06 15:52 tjallen New Issue
06-26-06 15:52 tjallen Distribution => Slackware 10.2
06-26-06 15:52 tjallen Kernel Version => 2.6.17.1
06-26-06 22:57 Adrian Bunk Issue Monitored: Adrian Bunk
06-28-06 23:25 rankincj Note Added: 0010628
06-29-06 00:40 tjallen Note Added: 0010630
06-29-06 17:57 tiwai Note Added: 0010679
06-29-06 20:30 tjallen Note Added: 0010701
06-29-06 23:14 rankincj Note Added: 0010703
06-29-06 23:17 rankincj Note Added: 0010704
06-30-06 01:45 tjallen Note Added: 0010708
06-30-06 02:10 rankincj Note Added: 0010710
06-30-06 14:46 tjallen Note Added: 0010735
06-30-06 22:38 rankincj Note Added: 0010752
06-30-06 22:47 Adrian Bunk Note Added: 0010753
07-02-06 01:39 rankincj File Added: sscape.c
07-02-06 01:41 rankincj Note Added: 0010767
07-02-06 03:15 tjallen File Added: sscape.dmesg
07-02-06 03:19 tjallen Note Added: 0010768
07-23-06 02:23 rankincj File Added: alsa-sscape.c
07-23-06 02:25 rankincj Note Added: 0011178
07-30-06 21:45 tjallen Note Added: 0011330
07-30-06 23:14 rankincj File Added: sscape.diff
07-30-06 23:17 rankincj Note Added: 0011332
07-31-06 16:59 tjallen Note Added: 0011343
08-03-06 00:47 rankincj Note Added: 0011391
08-03-06 01:40 tjallen Note Added: 0011392
08-05-06 13:31 rankincj File Added: codec-io.diff
08-05-06 13:36 rankincj Note Added: 0011429
08-05-06 22:43 rankincj File Added: codec-io-v2.diff
08-05-06 22:50 tjallen Note Added: 0011448
08-05-06 23:02 tjallen Note Added: 0011449
08-05-06 23:09 rankincj Note Added: 0011450
08-05-06 23:29 rankincj Note Added: 0011452
08-06-06 02:43 tjallen Note Added: 0011454
======================================================================
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
next reply other threads:[~2006-08-06 0:43 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-06 0:43 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-08-05 21:29 [ALSA - driver 0002234]: ISA sscape driver does not find Soundscape Elite bugtrack
2006-08-05 21:09 bugtrack
2006-08-05 21:02 bugtrack
2006-08-05 20:50 bugtrack
2006-08-05 11:36 bugtrack
2006-08-02 23:40 bugtrack
2006-08-02 22:47 bugtrack
2006-07-31 14:59 bugtrack
2006-07-30 21:17 bugtrack
2006-07-30 19:45 bugtrack
2006-07-23 0:25 bugtrack
2006-07-02 1:19 bugtrack
2006-07-01 23:41 bugtrack
2006-06-30 20:47 bugtrack
2006-06-30 20:38 bugtrack
2006-06-30 12:46 bugtrack
2006-06-30 0:10 bugtrack
2006-06-29 23:45 bugtrack
2006-06-29 21:17 bugtrack
2006-06-29 21:14 bugtrack
2006-06-29 18:30 bugtrack
2006-06-29 15:57 bugtrack
2006-06-28 22:40 bugtrack
2006-06-28 21:25 bugtrack
2006-06-26 13:52 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=be4b02b225081dca66684d9ee0260fb9@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox