From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0001094]: nforce4 - optical spdif out not working
Date: Mon, 9 May 2005 09:56:49 +0200 [thread overview]
Message-ID: <bfe4758452e11cd85c60cc3b702c9c5b@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1094>
======================================================================
Reported By: eklarson
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1094
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution: Fedora Core 3
Kernel Version: 2.6.11-1.14_FC3
======================================================================
Date Submitted: 05-07-2005 11:36 CEST
Last Modified: 05-09-2005 09:56 CEST
======================================================================
Summary: nforce4 - optical spdif out not working
Description:
A 48K PCM optical signal is getting sent out to my receiver, however I
can't get anything to play. I saw in the "intel8x0.c" that there is no
NFORCE4 callouts. Does the code fully support the nforce4 yet?
======================================================================
----------------------------------------------------------------------
eklarson - 05-07-05 23:44
----------------------------------------------------------------------
Followed the instruction on
"http://www.alsa-project.org/alsa-doc/doc-php/template.php?module=intel8x0"
and had no luck getting the optical out to work. There is also a forum
thread on this topic as well at
"http://www.nforcershq.com/forum/viewtopic.php?t=58251"
----------------------------------------------------------------------
gergap - 05-09-05 09:56
----------------------------------------------------------------------
I've the same problem with
INTEL865G ICH-5 (AOpen XC Cube)
SuSE 9.2, kernel 2.6.8-24.14
ALSA 1.0.7rc1
I also compiled the newer version ALSA 1.0.8 but also didn't work.
I can activate IEC958 in the mixer and the light of the optical out goes
on,
but I can't hear anything when connected to my receiver.
I can retest it when the problem is solved to verify it.
Issue History
Date Modified Username Field Change
======================================================================
05-07-05 11:36 eklarson New Issue
05-07-05 11:36 eklarson Distribution => Fedora Core 3
05-07-05 11:36 eklarson Kernel Version => 2.6.11-1.14_FC3
05-07-05 11:41 eklarson Note Added: 0004604
05-07-05 23:44 eklarson Note Edited: 0004604
05-09-05 09:56 gergap Note Added: 0004622
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by: NEC IT Guy Games.
Get your fingers limbered up and give it your best shot. 4 great events, 4
opportunities to win big! Highest score wins.NEC IT Guy Games. Play to
win an NEC 61 plasma display. Visit http://www.necitguy.com/?r=20
next reply other threads:[~2005-05-09 7:56 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-09 7:56 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-06-01 14:54 [ALSA - driver 0001094]: nforce4 - optical spdif out not working bugtrack
2005-06-01 14:51 bugtrack
2005-06-01 7:24 bugtrack
2005-05-31 19:10 bugtrack
2005-05-30 7:33 bugtrack
2005-05-28 7:55 bugtrack
2005-05-07 9:41 bugtrack
2005-05-07 9:36 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bfe4758452e11cd85c60cc3b702c9c5b@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox