From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0001197]: Realtek ALC650 output problem
Date: Fri, 24 Jun 2005 18:36:47 +0200 [thread overview]
Message-ID: <ceef64869c0ec8a58da152e71f7105a5@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-24-2005 18:36 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
tiwai - 06-24-05 18:31
----------------------------------------------------------------------
Did you enable "Duplicate Front" switch?
----------------------------------------------------------------------
willits - 06-24-05 18:36
----------------------------------------------------------------------
Yes, but when I enable Duplicate front, I have got only front and rear
speaker who work, no LFE or center. (These speaker are on the black
connector)
But I want to know If I can enable this feature of my soundcard :
White-Side:/proc/asound/card0/codec97#0 # cat ac97#0-0
0-0/0: Realtek ALC650E
Capabilities :
DAC resolution : 20-bit
ADC resolution : 18-bit
3D enhancement : Realtek 3D Stereo Enhancement --> I want to enable this
Current setup
Mic gain : +0dB [+0dB]
POP path : pre 3D
Sim. stereo : off
3D enhancement : off --> This is disabled
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
06-16-05 16:11 willits File Added: test.state
06-17-05 15:10 tiwai Note Added: 0005075
06-17-05 20:32 willits Note Added: 0005079
06-17-05 20:34 willits Note Added: 0005080
06-22-05 18:12 tiwai Note Added: 0005139
06-23-05 11:17 willits Note Added: 0005168
06-23-05 11:23 willits Note Added: 0005169
06-23-05 11:23 jcdutton Note Added: 0005170
06-23-05 11:56 pzad Note Added: 0005172
06-23-05 12:01 tiwai Note Added: 0005174
06-23-05 19:21 willits Note Added: 0005192
06-23-05 19:26 willits Note Added: 0005193
06-23-05 22:42 pzad Note Added: 0005196
06-24-05 14:37 willits Note Added: 0005220
06-24-05 14:54 tiwai Note Added: 0005221
06-24-05 15:07 jcdutton Note Added: 0005225
06-24-05 15:19 tiwai Note Added: 0005227
06-24-05 15:24 willits Note Added: 0005228
06-24-05 16:15 tiwai Note Added: 0005232
06-24-05 16:24 tiwai Note Added: 0005233
06-24-05 17:27 willits Note Added: 0005241
06-24-05 17:28 willits File Added: ICH4.conf
06-24-05 17:28 willits File Added: ICH.conf
06-24-05 17:59 tiwai Note Added: 0005245
06-24-05 18:23 willits Note Added: 0005246
06-24-05 18:25 willits Note Edited: 0005246
06-24-05 18:31 tiwai Note Added: 0005247
06-24-05 18:36 willits Note Added: 0005248
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
next reply other threads:[~2005-06-24 16:36 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-24 16:36 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-06-27 11:58 [ALSA - driver 0001197]: Realtek ALC650 output problem bugtrack
2005-06-24 16:41 bugtrack
2005-06-24 16:31 bugtrack
2005-06-24 16:23 bugtrack
2005-06-24 15:59 bugtrack
2005-06-24 15:27 bugtrack
2005-06-24 14:24 bugtrack
2005-06-24 14:15 bugtrack
2005-06-24 13:24 bugtrack
2005-06-24 13:19 bugtrack
2005-06-24 13:07 bugtrack
2005-06-24 12:54 bugtrack
2005-06-24 12:37 bugtrack
2005-06-23 20:42 bugtrack
2005-06-23 17:26 bugtrack
2005-06-23 17:21 bugtrack
2005-06-23 10:01 bugtrack
2005-06-23 9:56 bugtrack
2005-06-23 9:23 bugtrack
2005-06-23 9:23 bugtrack
2005-06-23 9:17 bugtrack
2005-06-22 16:12 bugtrack
2005-06-17 18:34 bugtrack
2005-06-17 18:32 bugtrack
2005-06-17 13:10 bugtrack
2005-06-16 14:10 bugtrack
2005-06-16 13:43 bugtrack
2005-06-16 13:25 bugtrack
2005-06-16 13:22 bugtrack
2005-06-16 13:19 bugtrack
2005-06-16 13:13 bugtrack
2005-06-16 13:07 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ceef64869c0ec8a58da152e71f7105a5@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox