[PATCH v5 0/4] Add dual-fifo mode support of i.MX ssi

alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed

* [PATCH v5 0/4] Add dual-fifo mode support of i.MX ssi
@ 2013-11-08 11:32 Nicolin Chen
  2013-11-08 11:32 ` [PATCH v5 1/4] dma: imx-sdma: Add sdma firmware version 2 support Nicolin Chen
                   ` (3 more replies)
  0 siblings, 4 replies; 6+ messages in thread
From: Nicolin Chen @ 2013-11-08 11:32 UTC (permalink / raw)
  To: vinod.koul-ral2JQCrhuEAvxtiuMwx3w,
	dan.j.williams-ral2JQCrhuEAvxtiuMwx3w,
	s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ, timur-N01EOCouUvQ,
	shawn.guo-QSEj5FYQhm4dnm+yROfE0A, broonie-DgEjT+Ai2ygdnm+yROfE0A
  Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-doc-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	dmaengine-u79uwXL29TY76Z2rM5mHXA,
	linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ,
	alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw,
	rob.herring-bsGFqQB8/DxBDgjK7y7TUQ, mark.rutland-5wv7dgnIgG8,
	swarren-3lzwWm7+Weoh9ZMKESR00Q, pawel.moll-5wv7dgnIgG8,
	ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg

 * ! This series of patches has a direct dependency between them. When
 * ! applying them, we need to apply to one single branch. Otherwise,
 * ! it would break currect branches.

Changelog
v5:
 * PATCH-3: Add period size constraint when using dual fifo mode
 *
 * Nothing changes for the other three patches
v4:
 * PATCH-3: Drop useless register configuration.
 *
 * Nothing changes for the other three patches
v3:
 * PATCH-1: Add comments to indicate the end of v1 and v2 array.
 * PATCH-3: Use better way to keep watermark as even number.
 *
 * Nothing changes for PATCH-2 and PATCH-4
v2:
 * Instead of adding rogue scripts to current SDMA driver based on firmware
 * V1, we define the new SDMA firmware as version 2 and bisect the PATCH-1
 * to two patches: The first is to add version check code to the SDMA driver;
 * And the second is to add SSI dual FIFO DMATYPE.
 *
 * Nothing changes for the last two patches.
v1:
 * SSI can reduce hardware overrun/underrun possibility when using dual
 * fifo mode. To support this mode, we need to first update sdma sciprt
 * list, and then enable dual fifo BIT in SSI driver, and last update DT
 * bindings of i.MX series.

Nicolin Chen (4):
  dma: imx-sdma: Add sdma firmware version 2 support
  dma: imx-sdma: Add new dma type for ssi dual fifo script
  ASoC: fsl_ssi: Add dual fifo mode support
  ARM: dts: imx: use dual-fifo sdma script for ssi

 .../devicetree/bindings/dma/fsl-imx-sdma.txt       |  1 +
 arch/arm/boot/dts/imx51.dtsi                       |  4 ++--
 arch/arm/boot/dts/imx53.dtsi                       |  4 ++--
 arch/arm/boot/dts/imx6qdl.dtsi                     | 12 +++++-----
 arch/arm/boot/dts/imx6sl.dtsi                      | 12 +++++-----
 drivers/dma/imx-sdma.c                             | 19 ++++++++++++++-
 include/linux/platform_data/dma-imx-sdma.h         |  5 ++++
 include/linux/platform_data/dma-imx.h              |  1 +
 sound/soc/fsl/fsl_ssi.c                            | 27 +++++++++++++++++++++-
 9 files changed, 67 insertions(+), 18 deletions(-)

-- 
1.8.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v5 1/4] dma: imx-sdma: Add sdma firmware version 2 support
  2013-11-08 11:32 [PATCH v5 0/4] Add dual-fifo mode support of i.MX ssi Nicolin Chen
@ 2013-11-08 11:32 ` Nicolin Chen
  2013-11-08 11:32 ` [PATCH v5 2/4] dma: imx-sdma: Add new dma type for ssi dual fifo script Nicolin Chen
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 6+ messages in thread
From: Nicolin Chen @ 2013-11-08 11:32 UTC (permalink / raw)
  To: vinod.koul, dan.j.williams, s.hauer, timur, shawn.guo, broonie
  Cc: linux-arm-kernel, devicetree, linux-doc, linux-kernel, dmaengine,
	linuxppc-dev, alsa-devel, rob.herring, mark.rutland, swarren,
	pawel.moll, ijc+devicetree

On i.MX5/6 series, SDMA is using new version firmware to support SSI
dual FIFO feature and HDMI Audio (i.MX6Q/DL only). Thus add it.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
---
 drivers/dma/imx-sdma.c                     | 15 ++++++++++++++-
 include/linux/platform_data/dma-imx-sdma.h |  5 +++++
 2 files changed, 19 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index fc43603..c7ece8d 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -323,6 +323,7 @@ struct sdma_engine {
 	struct clk			*clk_ipg;
 	struct clk			*clk_ahb;
 	spinlock_t			channel_0_lock;
+	u32				script_number;
 	struct sdma_script_start_addrs	*script_addrs;
 	const struct sdma_driver_data	*drvdata;
 };
@@ -1238,6 +1239,7 @@ static void sdma_issue_pending(struct dma_chan *chan)
 }
 
 #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1	34
+#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V2	38
 
 static void sdma_add_scripts(struct sdma_engine *sdma,
 		const struct sdma_script_start_addrs *addr)
@@ -1246,7 +1248,7 @@ static void sdma_add_scripts(struct sdma_engine *sdma,
 	s32 *saddr_arr = (u32 *)sdma->script_addrs;
 	int i;
 
-	for (i = 0; i < SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1; i++)
+	for (i = 0; i < sdma->script_number; i++)
 		if (addr_arr[i] > 0)
 			saddr_arr[i] = addr_arr[i];
 }
@@ -1272,6 +1274,17 @@ static void sdma_load_firmware(const struct firmware *fw, void *context)
 		goto err_firmware;
 	if (header->ram_code_start + header->ram_code_size > fw->size)
 		goto err_firmware;
+	switch (header->version_major) {
+		case 1:
+			sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1;
+			break;
+		case 2:
+			sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V2;
+			break;
+		default:
+			dev_err(sdma->dev, "unknown firmware version\n");
+			return;
+	}
 
 	addr = (void *)header + header->script_addrs_start;
 	ram_code = (void *)header + header->ram_code_start;
diff --git a/include/linux/platform_data/dma-imx-sdma.h b/include/linux/platform_data/dma-imx-sdma.h
index 3a39428..eabac4e 100644
--- a/include/linux/platform_data/dma-imx-sdma.h
+++ b/include/linux/platform_data/dma-imx-sdma.h
@@ -43,6 +43,11 @@ struct sdma_script_start_addrs {
 	s32 dptc_dvfs_addr;
 	s32 utra_addr;
 	s32 ram_code_start_addr;
+	/* End of v1 array */
+	s32 mcu_2_ssish_addr;
+	s32 ssish_2_mcu_addr;
+	s32 hdmi_dma_addr;
+	/* End of v2 array */
 };
 
 /**
-- 
1.8.4



^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v5 2/4] dma: imx-sdma: Add new dma type for ssi dual fifo script
  2013-11-08 11:32 [PATCH v5 0/4] Add dual-fifo mode support of i.MX ssi Nicolin Chen
  2013-11-08 11:32 ` [PATCH v5 1/4] dma: imx-sdma: Add sdma firmware version 2 support Nicolin Chen
@ 2013-11-08 11:32 ` Nicolin Chen
  2013-11-08 11:32 ` [PATCH v5 3/4] ASoC: fsl_ssi: Add dual fifo mode support Nicolin Chen
  2013-11-08 11:32 ` [PATCH v5 4/4] ARM: dts: imx: use dual-fifo sdma script for ssi Nicolin Chen
  3 siblings, 0 replies; 6+ messages in thread
From: Nicolin Chen @ 2013-11-08 11:32 UTC (permalink / raw)
  To: vinod.koul, dan.j.williams, s.hauer, timur, shawn.guo, broonie
  Cc: linux-arm-kernel, devicetree, linux-doc, linux-kernel, dmaengine,
	linuxppc-dev, alsa-devel, rob.herring, mark.rutland, swarren,
	pawel.moll, ijc+devicetree

This patch adds a new DMA_TYPE for SSI dual FIFO script, included
in SDMA firmware version 2. This script would allow SSI use dual
fifo mode to transimit/receive data without occasional hardware
underrun/overrun.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
---
 Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 1 +
 drivers/dma/imx-sdma.c                                 | 4 ++++
 include/linux/platform_data/dma-imx.h                  | 1 +
 3 files changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
index 4fa814d..68b83ec 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -42,6 +42,7 @@ The full ID of peripheral types can be found below.
 	19	IPU Memory
 	20	ASRC
 	21	ESAI
+	22	SSI Dual FIFO	(needs firmware ver >= 2)
 
 The third cell specifies the transfer priority as below.
 
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index c7ece8d..efaa9a9 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -725,6 +725,10 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
 		per_2_emi = sdma->script_addrs->app_2_mcu_addr;
 		emi_2_per = sdma->script_addrs->mcu_2_app_addr;
 		break;
+	case IMX_DMATYPE_SSI_DUAL:
+		per_2_emi = sdma->script_addrs->ssish_2_mcu_addr;
+		emi_2_per = sdma->script_addrs->mcu_2_ssish_addr;
+		break;
 	case IMX_DMATYPE_SSI_SP:
 	case IMX_DMATYPE_MMC:
 	case IMX_DMATYPE_SDHC:
diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h
index beac6b8..bcbc6c3 100644
--- a/include/linux/platform_data/dma-imx.h
+++ b/include/linux/platform_data/dma-imx.h
@@ -39,6 +39,7 @@ enum sdma_peripheral_type {
 	IMX_DMATYPE_IPU_MEMORY,	/* IPU Memory */
 	IMX_DMATYPE_ASRC,	/* ASRC */
 	IMX_DMATYPE_ESAI,	/* ESAI */
+	IMX_DMATYPE_SSI_DUAL,	/* SSI Dual FIFO */
 };
 
 enum imx_dma_prio {
-- 
1.8.4

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v5 3/4] ASoC: fsl_ssi: Add dual fifo mode support
  2013-11-08 11:32 [PATCH v5 0/4] Add dual-fifo mode support of i.MX ssi Nicolin Chen
  2013-11-08 11:32 ` [PATCH v5 1/4] dma: imx-sdma: Add sdma firmware version 2 support Nicolin Chen
  2013-11-08 11:32 ` [PATCH v5 2/4] dma: imx-sdma: Add new dma type for ssi dual fifo script Nicolin Chen
@ 2013-11-08 11:32 ` Nicolin Chen
  2013-11-08 15:45   ` Mark Brown
  2013-11-08 11:32 ` [PATCH v5 4/4] ARM: dts: imx: use dual-fifo sdma script for ssi Nicolin Chen
  3 siblings, 1 reply; 6+ messages in thread
From: Nicolin Chen @ 2013-11-08 11:32 UTC (permalink / raw)
  To: vinod.koul, dan.j.williams, s.hauer, timur, shawn.guo, broonie
  Cc: linux-arm-kernel, devicetree, linux-doc, linux-kernel, dmaengine,
	linuxppc-dev, alsa-devel, rob.herring, mark.rutland, swarren,
	pawel.moll, ijc+devicetree

By enabling dual fifo mode, it would allow SSI enter a better performance
to transimit/receive data without occasional hardware underrun/overrun.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
---
 sound/soc/fsl/fsl_ssi.c | 27 ++++++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 6b81d0c..af6640c 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -143,6 +143,7 @@ struct fsl_ssi_private {
 	bool ssi_on_imx;
 	bool imx_ac97;
 	bool use_dma;
+	bool use_dual_fifo;
 	struct clk *clk;
 	struct snd_dmaengine_dai_dma_data dma_params_tx;
 	struct snd_dmaengine_dai_dma_data dma_params_rx;
@@ -413,6 +414,12 @@ static int fsl_ssi_setup(struct fsl_ssi_private *ssi_private)
 		write_ssi(CCSR_SSI_SOR_WAIT(3), &ssi->sor);
 	}
 
+	if (ssi_private->use_dual_fifo) {
+		write_ssi_mask(&ssi->srcr, 0, CCSR_SSI_SRCR_RFEN1);
+		write_ssi_mask(&ssi->stcr, 0, CCSR_SSI_STCR_TFEN1);
+		write_ssi_mask(&ssi->scr, 0, CCSR_SSI_SCR_TCH_EN);
+	}
+
 	return 0;
 }
 
@@ -487,6 +494,15 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream,
 		ssi_private->second_stream = substream;
 	}
 
+	/* When using dual fifo mode, it is safer to ensure an even period
+	 * size. If appearing to an odd number while DMA always starts its
+	 * task from fifo0, fifo1 would be neglected at the end of each
+	 * period. But SSI would still access fifo1 with an invalid data.
+	 */
+	if (ssi_private->use_dual_fifo)
+		snd_pcm_hw_constraint_step(substream->runtime, 0,
+				SNDRV_PCM_HW_PARAM_PERIOD_SIZE, 2);
+
 	return 0;
 }
 
@@ -954,7 +970,7 @@ static int fsl_ssi_probe(struct platform_device *pdev)
 		ssi_private->fifo_depth = 8;
 
 	if (of_device_is_compatible(pdev->dev.of_node, "fsl,imx21-ssi")) {
-		u32 dma_events[2];
+		u32 dma_events[2], dmas[4];
 		ssi_private->ssi_on_imx = true;
 
 		ssi_private->clk = devm_clk_get(&pdev->dev, NULL);
@@ -1008,6 +1024,15 @@ static int fsl_ssi_probe(struct platform_device *pdev)
 			dma_events[0], shared ? IMX_DMATYPE_SSI_SP : IMX_DMATYPE_SSI);
 		imx_pcm_dma_params_init_data(&ssi_private->filter_data_rx,
 			dma_events[1], shared ? IMX_DMATYPE_SSI_SP : IMX_DMATYPE_SSI);
+		if (!of_property_read_u32_array(pdev->dev.of_node, "dmas", dmas, 4)
+				&& dmas[2] == IMX_DMATYPE_SSI_DUAL) {
+			ssi_private->use_dual_fifo = true;
+			/* When using dual fifo mode, we need to keep watermark
+			 * as even numbers due to dma script limitation.
+			 */
+			ssi_private->dma_params_tx.maxburst &= ~0x1;
+			ssi_private->dma_params_rx.maxburst &= ~0x1;
+		}
 	} else if (ssi_private->use_dma) {
 		/* The 'name' should not have any slashes in it. */
 		ret = devm_request_irq(&pdev->dev, ssi_private->irq,
-- 
1.8.4



^ permalink raw reply related	[flat|nested] 6+ messages in thread

* Re: [PATCH v5 3/4] ASoC: fsl_ssi: Add dual fifo mode support
  2013-11-08 11:32 ` [PATCH v5 3/4] ASoC: fsl_ssi: Add dual fifo mode support Nicolin Chen
@ 2013-11-08 15:45   ` Mark Brown
  0 siblings, 0 replies; 6+ messages in thread
From: Mark Brown @ 2013-11-08 15:45 UTC (permalink / raw)
  To: Nicolin Chen
  Cc: vinod.koul, dan.j.williams, s.hauer, timur, shawn.guo,
	linux-arm-kernel, devicetree, linux-doc, linux-kernel, dmaengine,
	linuxppc-dev, alsa-devel, rob.herring, mark.rutland, swarren,
	pawel.moll, ijc+devicetree

[-- Attachment #1: Type: text/plain, Size: 255 bytes --]

On Fri, Nov 08, 2013 at 07:32:53PM +0800, Nicolin Chen wrote:
> By enabling dual fifo mode, it would allow SSI enter a better performance
> to transimit/receive data without occasional hardware underrun/overrun.

Acked-by: Mark Brown <broonie@linaro.org>

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v5 4/4] ARM: dts: imx: use dual-fifo sdma script for ssi
  2013-11-08 11:32 [PATCH v5 0/4] Add dual-fifo mode support of i.MX ssi Nicolin Chen
                   ` (2 preceding siblings ...)
  2013-11-08 11:32 ` [PATCH v5 3/4] ASoC: fsl_ssi: Add dual fifo mode support Nicolin Chen
@ 2013-11-08 11:32 ` Nicolin Chen
  3 siblings, 0 replies; 6+ messages in thread
From: Nicolin Chen @ 2013-11-08 11:32 UTC (permalink / raw)
  To: vinod.koul, dan.j.williams, s.hauer, timur, shawn.guo, broonie
  Cc: linux-arm-kernel, devicetree, linux-doc, linux-kernel, dmaengine,
	linuxppc-dev, alsa-devel, rob.herring, mark.rutland, swarren,
	pawel.moll, ijc+devicetree

Use dual-fifo sdma scripts instead of shared scripts for ssi on i.MX series.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
---
 arch/arm/boot/dts/imx51.dtsi   |  4 ++--
 arch/arm/boot/dts/imx53.dtsi   |  4 ++--
 arch/arm/boot/dts/imx6qdl.dtsi | 12 ++++++------
 arch/arm/boot/dts/imx6sl.dtsi  | 12 ++++++------
 4 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 54cee65..1a71eac 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -154,8 +154,8 @@
 					reg = <0x70014000 0x4000>;
 					interrupts = <30>;
 					clocks = <&clks 49>;
-					dmas = <&sdma 24 1 0>,
-					       <&sdma 25 1 0>;
+					dmas = <&sdma 24 22 0>,
+					       <&sdma 25 22 0>;
 					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 4307e80..7208fde 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -153,8 +153,8 @@
 					reg = <0x50014000 0x4000>;
 					interrupts = <30>;
 					clocks = <&clks 49>;
-					dmas = <&sdma 24 1 0>,
-					       <&sdma 25 1 0>;
+					dmas = <&sdma 24 22 0>,
+					       <&sdma 25 22 0>;
 					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 57e9c38..6e096ca 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -223,8 +223,8 @@
 					reg = <0x02028000 0x4000>;
 					interrupts = <0 46 0x04>;
 					clocks = <&clks 178>;
-					dmas = <&sdma 37 1 0>,
-					       <&sdma 38 1 0>;
+					dmas = <&sdma 37 22 0>,
+					       <&sdma 38 22 0>;
 					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					fsl,ssi-dma-events = <38 37>;
@@ -236,8 +236,8 @@
 					reg = <0x0202c000 0x4000>;
 					interrupts = <0 47 0x04>;
 					clocks = <&clks 179>;
-					dmas = <&sdma 41 1 0>,
-					       <&sdma 42 1 0>;
+					dmas = <&sdma 41 22 0>,
+					       <&sdma 42 22 0>;
 					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					fsl,ssi-dma-events = <42 41>;
@@ -249,8 +249,8 @@
 					reg = <0x02030000 0x4000>;
 					interrupts = <0 48 0x04>;
 					clocks = <&clks 180>;
-					dmas = <&sdma 45 1 0>,
-					       <&sdma 46 1 0>;
+					dmas = <&sdma 45 22 0>,
+					       <&sdma 46 22 0>;
 					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					fsl,ssi-dma-events = <46 45>;
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index c46651e..b32ba99 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -195,8 +195,8 @@
 					reg = <0x02028000 0x4000>;
 					interrupts = <0 46 0x04>;
 					clocks = <&clks IMX6SL_CLK_SSI1>;
-					dmas = <&sdma 37 1 0>,
-					       <&sdma 38 1 0>;
+					dmas = <&sdma 37 22 0>,
+					       <&sdma 38 22 0>;
 					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					status = "disabled";
@@ -207,8 +207,8 @@
 					reg = <0x0202c000 0x4000>;
 					interrupts = <0 47 0x04>;
 					clocks = <&clks IMX6SL_CLK_SSI2>;
-					dmas = <&sdma 41 1 0>,
-					       <&sdma 42 1 0>;
+					dmas = <&sdma 41 22 0>,
+					       <&sdma 42 22 0>;
 					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					status = "disabled";
@@ -219,8 +219,8 @@
 					reg = <0x02030000 0x4000>;
 					interrupts = <0 48 0x04>;
 					clocks = <&clks IMX6SL_CLK_SSI3>;
-					dmas = <&sdma 45 1 0>,
-					       <&sdma 46 1 0>;
+					dmas = <&sdma 45 22 0>,
+					       <&sdma 46 22 0>;
 					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					status = "disabled";
-- 
1.8.4

^ permalink raw reply related	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2013-11-08 15:45 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-11-08 11:32 [PATCH v5 0/4] Add dual-fifo mode support of i.MX ssi Nicolin Chen
2013-11-08 11:32 ` [PATCH v5 1/4] dma: imx-sdma: Add sdma firmware version 2 support Nicolin Chen
2013-11-08 11:32 ` [PATCH v5 2/4] dma: imx-sdma: Add new dma type for ssi dual fifo script Nicolin Chen
2013-11-08 11:32 ` [PATCH v5 3/4] ASoC: fsl_ssi: Add dual fifo mode support Nicolin Chen
2013-11-08 15:45   ` Mark Brown
2013-11-08 11:32 ` [PATCH v5 4/4] ARM: dts: imx: use dual-fifo sdma script for ssi Nicolin Chen

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).