From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0000659]: configure: error: Unsupported soundcard cs4236
Date: Tue, 23 Nov 2004 16:17:14 +0100 [thread overview]
Message-ID: <d051f8d86fe1d5a898c1b6bd9dadaed8@bugtrack.alsa-project.org> (raw)
The following issue has been RESOLVED.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=659>
======================================================================
Reported By: olivier55
Assigned To: perex
======================================================================
Project: ALSA - driver
Issue ID: 659
Category: 0_compilation problem_!!!
Reproducibility: always
Severity: block
Priority: normal
Status: resolved
Distribution: mandrake 10.1
Kernel Version: 2.6.8.1-10
Resolution: not an issue
Fixed in Version:
======================================================================
Date Submitted: 11-20-2004 22:25 CET
Last Modified: 11-23-2004 16:17 CET
======================================================================
Summary: configure: error: Unsupported soundcard cs4236
Description:
when i do :
./configure --with-cards=cs4236 --with-sequencer=yes
i've this error :
configure: error: Unsupported soundcard cs4236
my soundcard is a Crystal Audio CS4237 (cirrus logic)
i have a laptop dell inspiron 8200
======================================================================
----------------------------------------------------------------------
olivier55 - 11-22-04 19:13
----------------------------------------------------------------------
with the default install of mandrake 10.1, my sound card is detected.
if i start "alsamixer", i have this :
php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org
/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;[A
lsaMixer
v1.0.6 (Press Escape to
-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-p
roject.org/alsa-bug/view.php?id=9472;&https://bugtrack.alsa-project.org/alsa-bug/view.php?
id=9488;
&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9474; Card: Intel
82801CA-ICH3
&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9474;
&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9474; Chip: Cirrus Logic
CS4205 rev 3
&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9474;
&https://bugtrack.alsa-project.org/alsa-bug/view.php?id=9474; Item: Master
But the cd CS4205 is not the properly sound card. However, with this
configuration, i've no midi device in Kmidi. My trouble is, how to do for
having a midi device ?
----------------------------------------------------------------------
tiwai - 11-23-04 16:17
----------------------------------------------------------------------
CS4205 is AC97 codec chip. Your driver should be snd-intel8x0.
Simply build all drivers without --with-cards option, and run alsaconf to
detect/configure the card.
Issue History
Date Modified Username Field Change
======================================================================
11-20-04 22:25 olivier55 New Issue
11-20-04 22:25 olivier55 Distribution => mandrake 10.1
11-20-04 22:25 olivier55 Kernel Version => 2.6.8.1-10
11-20-04 22:30 olivier55 Issue Monitored: olivier55
11-20-04 22:30 olivier55 Issue End Monitor: olivier55
11-22-04 14:42 tiwai Note Added: 0002502
11-22-04 19:13 olivier55 Note Added: 0002511
11-23-04 16:17 tiwai Status assigned => resolved
11-23-04 16:17 tiwai Resolution open => not an issue
11-23-04 16:17 tiwai Note Added: 0002521
======================================================================
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
next reply other threads:[~2004-11-23 15:17 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-11-23 15:17 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2004-12-27 14:47 [ALSA - driver 0000659]: configure: error: Unsupported soundcard cs4236 bugtrack
2004-11-22 18:13 bugtrack
2004-11-22 13:42 bugtrack
2004-11-20 21:25 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d051f8d86fe1d5a898c1b6bd9dadaed8@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox