From: Hans de Goede <hdegoede@redhat.com>
To: Mark Brown <broonie@kernel.org>, Bard Liao <bardliao@realtek.com>,
Oder Chiou <oder_chiou@realtek.com>,
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: alsa-devel@alsa-project.org, Carlo Caione <carlo@endlessm.com>,
Takashi Iwai <tiwai@suse.com>
Subject: Re: [PATCH v2 00/32] ASoC: rt5651: jack-detect fixes and improvements
Date: Sun, 25 Feb 2018 11:58:32 +0100 [thread overview]
Message-ID: <d4a45fd7-de2c-e554-a9d0-d5128c8bcee6@redhat.com> (raw)
In-Reply-To: <20180225104713.4745-1-hdegoede@redhat.com>
Hi,
On 25-02-18 11:46, Hans de Goede wrote:
> Hi All,
>
> Here is v2 of my rt5651 codec and Intel machine-driver series which mainly
> consists of various jack-detect related fixes and improvements.
>
> As discussed in the review of v1 I've made the following changes:
>
> 1) Get rid of platform_data and use device-properties instead
>
> 2) Split up a couple of the micbias / OVCD / jack-detect patches into
> smaller patches, as they were doing too much in a single patch
>
> 3) Improved commit messages
>
> 4) Concentrate the knowledge that SSP0 is 16 bits on BYTCR in the fixup
> function and extract the sample-format from the hw_params in other places
p.s.
This series was testen on the following devices:
-Chuwi Hi8 Pro (Cherry Trail)
-Chuwi Vi8 Plus (Cherry Trail)
-I.T.Works TW701 (Bay Trail CR)
-Trekstor Surftab Wintron 7.0 ST70416-6 (Bay Trail CR)
Regards,
Hans
prev parent reply other threads:[~2018-02-25 10:58 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-25 10:46 [PATCH v2 00/32] ASoC: rt5651: jack-detect fixes and improvements Hans de Goede
2018-02-25 10:46 ` [PATCH v2 01/32] ASoC: rt5651: Remove unused rt5651_platform_data Hans de Goede
2018-02-25 10:46 ` [PATCH v2 02/32] ASoC: rt5651: Move all jack-detect initialization to rt5651_set_jack_detect Hans de Goede
2018-03-01 18:06 ` Applied "ASoC: rt5651: Move all jack-detect initialization to rt5651_set_jack_detect" to the asoc tree Mark Brown
2018-02-25 10:46 ` [PATCH v2 03/32] ASoC: rt5651: Move 2 functions higher up in rt5651.c Hans de Goede
2018-03-01 18:06 ` Applied "ASoC: rt5651: Move 2 functions higher up in rt5651.c" to the asoc tree Mark Brown
2018-02-25 10:46 ` [PATCH v2 04/32] ASoC: rt5651: Use standard component set_jack callback Hans de Goede
2018-02-25 10:46 ` [PATCH v2 05/32] ASoC: rt5651: Add rt5651_apply_properties() helper function Hans de Goede
2018-03-01 18:06 ` Applied "ASoC: rt5651: Add rt5651_apply_properties() helper function" to the asoc tree Mark Brown
2018-02-25 10:46 ` [PATCH v2 06/32] ASoC: rt5651: Configure jack-detect source through a device-property Hans de Goede
2018-03-01 19:30 ` Mark Brown
2018-03-01 22:35 ` Hans de Goede
2018-03-02 9:32 ` Hans de Goede
2018-03-02 12:18 ` Mark Brown
2018-03-02 12:58 ` Hans de Goede
2018-03-02 17:41 ` Mark Brown
2018-03-03 21:20 ` Hans de Goede
2018-03-02 22:17 ` Rob Herring
2018-02-25 10:46 ` [PATCH v2 07/32] ASoC: rt5651: Remove is_sys_clk_from_pll() Hans de Goede
2018-03-01 19:26 ` Applied "ASoC: rt5651: Remove is_sys_clk_from_pll()" to the asoc tree Mark Brown
2018-02-25 10:46 ` [PATCH v2 08/32] ASoC: rt5651: Fix bias_level confusion Hans de Goede
2018-03-01 19:26 ` Applied "ASoC: rt5651: Fix bias_level confusion" to the asoc tree Mark Brown
2018-02-25 10:46 ` [PATCH v2 09/32] ASoC: rt5651: Do not modify the LDO voltage control bits from set_bias_level() Hans de Goede
2018-03-01 19:26 ` Applied "ASoC: rt5651: Do not modify the LDO voltage control bits from set_bias_level()" to the asoc tree Mark Brown
2018-02-25 10:46 ` [PATCH v2 10/32] ASoC: rt5651: Do not modify jd and PLL power bits from set_bias_level() Hans de Goede
2018-03-01 19:26 ` Applied "ASoC: rt5651: Do not modify jd and PLL power bits from set_bias_level()" to the asoc tree Mark Brown
2018-02-25 10:46 ` [PATCH v2 11/32] ASoC: rt5651: Remove programming of PWR regs before force_bias_level() call Hans de Goede
2018-03-01 19:26 ` Applied "ASoC: rt5651: Remove programming of PWR regs before force_bias_level() call" to the asoc tree Mark Brown
2018-02-25 10:46 ` [PATCH v2 12/32] ASoC: rt5651: Only configure LDO voltage once at boot Hans de Goede
2018-03-01 19:26 ` Applied "ASoC: rt5651: Only configure LDO voltage once at boot" to the asoc tree Mark Brown
2018-02-25 10:46 ` [PATCH v2 13/32] ASoC: rt5651: Remove "JD Power" dapm supply Hans de Goede
2018-03-01 19:25 ` Applied "ASoC: rt5651: Remove "JD Power" dapm supply" to the asoc tree Mark Brown
2018-02-25 10:46 ` [PATCH v2 14/32] ASoC: rt5651: Enable LDO and micbias1 supplies for jack-type detection Hans de Goede
2018-02-25 10:46 ` [PATCH v2 15/32] ASoC: rt5651: Only configure OVCD once at set_jack time Hans de Goede
2018-03-01 19:25 ` Applied "ASoC: rt5651: Only configure OVCD once at set_jack time" to the asoc tree Mark Brown
2018-02-25 10:46 ` [PATCH v2 16/32] ASoC: rt5651: Always keep OVCD enabled Hans de Goede
2018-03-01 19:25 ` Applied "ASoC: rt5651: Always keep OVCD enabled" to the asoc tree Mark Brown
2018-02-25 10:46 ` [PATCH v2 17/32] ASoC: rt5651: Allow specifying over-current thresholds through device-properties Hans de Goede
2018-03-02 22:18 ` Rob Herring
2018-02-25 10:46 ` [PATCH v2 18/32] ASoC: rt5651: Enable sticky mode for OVCD Hans de Goede
2018-03-07 14:14 ` Applied "ASoC: rt5651: Enable sticky mode for OVCD" to the asoc tree Mark Brown
2018-02-25 10:47 ` [PATCH v2 19/32] ASoC: rt5651: Enable Platform Clock during jack-type detect Hans de Goede
2018-03-07 14:13 ` Applied "ASoC: rt5651: Enable Platform Clock during jack-type detect" to the asoc tree Mark Brown
2018-02-25 10:47 ` [PATCH v2 20/32] ASoC: rt5651: Add rt5651_jack_inserted() helper Hans de Goede
2018-03-07 14:13 ` Applied "ASoC: rt5651: Add rt5651_jack_inserted() helper" to the asoc tree Mark Brown
2018-02-25 10:47 ` [PATCH v2 21/32] ASoC: rt5651: Rewrite jack-type detection Hans de Goede
2018-02-25 10:47 ` [PATCH v2 22/32] ASoC: Intel: bytcr_rt5651: Actually honor the DMIC_EN quirk if specified Hans de Goede
2018-02-25 10:47 ` [PATCH v2 23/32] ASoC: Intel: bytcr_rt5651: Only create jack if we have a jack-detect source Hans de Goede
2018-02-25 10:47 ` [PATCH v2 24/32] ASoC: Intel: bytcr_rt5651: Add quirk micbias OVCD configuration Hans de Goede
2018-02-25 10:47 ` [PATCH v2 25/32] ASoC: Intel: bytcr_rt5651: Configure PLL1 before using it Hans de Goede
2018-03-07 14:22 ` Applied "ASoC: Intel: bytcr_rt5651: Configure PLL1 before using it" to the asoc tree Mark Brown
2018-02-25 10:47 ` [PATCH v2 26/32] ASoC: Intel: bytcr_rt5651: Drop snd_soc_dai_set_bclk_ratio() call Hans de Goede
2018-03-07 14:22 ` Applied "ASoC: Intel: bytcr_rt5651: Drop snd_soc_dai_set_bclk_ratio() call" to the asoc tree Mark Brown
2018-02-25 10:47 ` [PATCH v2 27/32] ASoC: Intel: bytcr_rt5651: Rename IN3_MAP to IN1_HS_IN3_MAP Hans de Goede
2018-03-07 14:22 ` Applied "ASoC: Intel: bytcr_rt5651: Rename IN3_MAP to IN1_HS_IN3_MAP" to the asoc tree Mark Brown
2018-02-25 10:47 ` [PATCH v2 28/32] ASoC: Intel: bytcr_rt5651: Add new IN2_HS_IN3 input map and a quirk using it Hans de Goede
2018-03-07 14:21 ` Applied "ASoC: Intel: bytcr_rt5651: Add new IN2_HS_IN3 input map and a quirk using it" to the asoc tree Mark Brown
2018-02-25 10:47 ` [PATCH v2 29/32] ASoC: Intel: bytcr_rt5651: Add support for Bay Trail CR / SSP0 using boards Hans de Goede
2018-02-25 10:47 ` [PATCH v2 30/32] ASoC: Intel: bytcr_rt5651: Add quirk for the VIOS LTH17 laptop Hans de Goede
2018-03-07 14:21 ` Applied "ASoC: Intel: bytcr_rt5651: Add quirk for the VIOS LTH17 laptop" to the asoc tree Mark Brown
2018-02-25 10:47 ` [PATCH v2 31/32] ASoC: Intel: bytcr_rt5651: Change defaults to enable jack-detect, analog mics Hans de Goede
2018-03-07 14:21 ` Applied "ASoC: Intel: bytcr_rt5651: Change defaults to enable jack-detect, analog mics" to the asoc tree Mark Brown
2018-02-25 10:47 ` [PATCH v2 32/32] ASoC: Intel: bytcr_rt5651: Select RCCLK on init() Hans de Goede
2018-03-07 14:21 ` Applied "ASoC: Intel: bytcr_rt5651: Select RCCLK on init()" to the asoc tree Mark Brown
2018-02-25 10:58 ` Hans de Goede [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d4a45fd7-de2c-e554-a9d0-d5128c8bcee6@redhat.com \
--to=hdegoede@redhat.com \
--cc=alsa-devel@alsa-project.org \
--cc=bardliao@realtek.com \
--cc=broonie@kernel.org \
--cc=carlo@endlessm.com \
--cc=oder_chiou@realtek.com \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox