Re: [PATCH v2 2/3] ASoC: tlv320adcx140: Add support for configuring GPIO pin

[Dan Murphy <dmurphy@ti.com>]

Camel

On 9/11/20 3:07 AM, Camel Guo wrote:
> From: Camel Guo <camelg@axis.com>
>
> Add support to configure the GPIO pin to the specific configuration.
> The GPIO pin can be configured as GPO, IRQ, SDOUT2, PDMCLK, MICBASE_EN,
> GPI, MCLK, SDIN, PDMDIN1, PDMDIN2, PDMDIN3 or PDMDIN4 and the output
> drive can be configured with various configuration.
>
> Signed-off-by: Camel Guo <camelg@axis.com>
> ---
>   sound/soc/codecs/tlv320adcx140.c | 44 ++++++++++++++++++++++++++++++++
>   sound/soc/codecs/tlv320adcx140.h |  4 +++
>   2 files changed, 48 insertions(+)
>
> diff --git a/sound/soc/codecs/tlv320adcx140.c b/sound/soc/codecs/tlv320adcx140.c
> index f33ee604ee78..97f16fbba441 100644
> --- a/sound/soc/codecs/tlv320adcx140.c
> +++ b/sound/soc/codecs/tlv320adcx140.c
> @@ -837,6 +837,46 @@ static int adcx140_configure_gpo(struct adcx140_priv *adcx140)
>   
>   }
>   
> +static int adcx140_configure_gpio(struct adcx140_priv *adcx140)
> +{
> +	int gpio_count = 0;
> +	u32 gpio_outputs[2];

This is #defined in configure_gpo and configure_gpi would like to see 
the consistency here.

> +	u32 gpio_output_val = 0;
> +	int ret;
> +
> +	gpio_count = device_property_count_u32(adcx140->dev,
> +			"ti,gpio-config");
> +	if (gpio_count == 0)
> +		return 0;
> +
> +	if (gpio_count != 2)
Same comment as above.
> +		return -EINVAL;
> +
> +	ret = device_property_read_u32_array(adcx140->dev, "ti,gpio-config",
> +			gpio_outputs, gpio_count);
> +	if (ret)
> +		return ret;
> +
> +	if (gpio_outputs[0] > ADCX140_GPIO_CFG_MAX) {
> +		dev_err(adcx140->dev, "GPIO config out of range\n");
> +		return -EINVAL;
> +	}
> +
> +	if (gpio_outputs[1] > ADCX140_GPIO_DRV_MAX) {
> +		dev_err(adcx140->dev, "GPIO drive out of range\n");
> +		return -EINVAL;
> +	}
> +
> +	gpio_output_val = gpio_outputs[0] << ADCX140_GPIO_SHIFT
> +		| gpio_outputs[1];
> +
> +	ret = regmap_write(adcx140->regmap, ADCX140_GPIO_CFG0, gpio_output_val);
> +	if (ret)
> +		return ret;

Just do return regmap_write no reason to check it. It is checked by the 
caller.


Dan