[ALSA - driver 0001850]: source available

[bugtrack@alsa-project.org]

A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1850> 
======================================================================
Reported By:                coz
Assigned To:                
======================================================================
Project:                    ALSA - driver
Issue ID:                   1850
Category:                   PCI - echoaudio
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     new
Distribution:               ubuntu/breezy/Debian
Kernel Version:             2.6.12.10.386
======================================================================
Date Submitted:             02-16-2006 13:05 CET
Last Modified:              03-27-2006 05:04 CEST
======================================================================
Summary:                    source available
Description: 
can't start layla24
======================================================================

----------------------------------------------------------------------
 pochini - 03-25-06 12:04 
----------------------------------------------------------------------
You can also try to enable debugging in alsa-driver by passing the
"--with-debug=full" option to configure. It make the driver print a lot of
stuff in the system logs. Maybe when you load the module it prints
something useful.
Also, make sure the modules are installed (dir
/lib/modules/2.6.14.2/kernel/sound/pci/echoaudio/ (you kernel version may
differ)) and the firmware binaries are installed (dir /lib/firmware/ea/).
Type "modprobe snd-<yourcard>" and then "dmesg" to see the debug messages.
You may need to unload the modules if they're already loaded. Use "lsmod"
to the the list and "modprobe -r <name>" to onload a module.

----------------------------------------------------------------------
 coz - 03-27-06 05:04 
----------------------------------------------------------------------
Ok I installed the drive, the li, and the firmware, I got an error that
said to look in dmesg. The foloowing is the result;;

[4294667.296000] Linux version 2.6.15-19-386 (buildd@rothera) (gcc version
4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 PREEMPT Mon Mar 20 16:46:02 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000]  BIOS-e820: 000000000009fc00 - 00000000000a0000
(reserved)
[4294667.296000]  BIOS-e820: 00000000000e0000 - 0000000000100000
(reserved)
[4294667.296000]  BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable)
[4294667.296000]  BIOS-e820: 000000003ffc0000 - 000000003fff8000 (ACPI
data)
[4294667.296000]  BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI
NVS)
[4294667.296000]  BIOS-e820: 00000000fec00000 - 00000000fec01000
(reserved)
[4294667.296000]  BIOS-e820: 00000000fee00000 - 00000000fee01000
(reserved)
[4294667.296000]  BIOS-e820: 00000000ffb80000 - 00000000ffc00000
(reserved)
[4294667.296000]  BIOS-e820: 00000000fff00000 - 0000000100000000
(reserved)
[4294667.296000] 127MB HIGHMEM available.
[4294667.296000] 896MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 262080
[4294667.296000]   DMA zone: 4096 pages, LIFO batch:0
[4294667.296000]   DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000]   Normal zone: 225280 pages, LIFO batch:31
[4294667.296000]   HighMem zone: 32704 pages, LIFO batch:7
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 AMI                                   )
@ 0x000ff980
[4294667.296000] ACPI: RSDT (v001 D850GB G285010A 0x20011008 MSFT
0x00001011) @ 0x3fff0000
[4294667.296000] ACPI: FADT (v001 D850GB GB85010A 0x20011008 MSFT
0x00001011) @ 0x3fff1000
[4294667.296000] ACPI: MADT (v001 D850GB GB85010A 0x20011008 MSFT
0x00001011) @ 0x3ffe2e67
[4294667.296000] ACPI: DSDT (v001 D850GB GB85010A 0x00000002 MSFT
0x0100000b) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x408
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 15:0 APIC version 20
[4294667.296000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 50000000 (gap:
40000000:bec00000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/sda1 ro quiet splash
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[4294667.296000] Detected 1695.345 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294669.071000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[4294669.072000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[4294669.117000] Memory: 1028900k/1048320k available (1971k kernel code,
18700k reserved, 599k data, 288k init, 130816k highmem)
[4294669.117000] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[4294669.177000] Calibrating delay using timer specific routine.. 3399.13
BogoMIPS (lpj=1699566)
[4294669.177000] Security Framework v1.0.0 initialized
[4294669.177000] SELinux:  Disabled at boot.
[4294669.177000] Mount-cache hash table entries: 512
[4294669.177000] CPU: After generic identify, caps: 3febfbff 00000000
00000000 00000000 00000000 00000000 00000000
[4294669.177000] CPU: After vendor identify, caps: 3febfbff 00000000
00000000 00000000 00000000 00000000 00000000
[4294669.177000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[4294669.177000] CPU: L2 cache: 256K
[4294669.177000] CPU: After all inits, caps: 3febfbff 00000000 00000000
00000080 00000000 00000000 00000000
[4294669.177000] mtrr: v2.0 (20020519)
[4294669.177000] CPU: Intel(R) Pentium(R) 4 CPU 1700MHz stepping 0a
[4294669.177000] Enabling fast FPU save and restore... done.
[4294669.177000] Enabling unmasked SIMD FPU exception support... done.
[4294669.177000] Checking 'hlt' instruction... OK.
[4294669.181000] checking if image is initramfs... it is
[4294670.011000] Freeing initrd memory: 6376k freed
[4294670.021000] ACPI: Looking for DSDT ... not found!
[4294670.025000] ENABLING IO-APIC IRQs
[4294670.025000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294670.136000] NET: Registered protocol family 16
[4294670.136000] EISA bus registered
[4294670.136000] ACPI: bus type pci registered
[4294670.136000] PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2
[4294670.136000] PCI: Using configuration type 1
[4294670.137000] ACPI: Subsystem revision 20051216
[4294670.143000] ACPI: Interpreter enabled
[4294670.143000] ACPI: Using IOAPIC for interrupt routing
[4294670.144000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294670.144000] PCI: Probing PCI hardware (bus 00)
[4294670.146000] PCI quirk: region 0400-047f claimed by ICH4
ACPI/GPIO/TCO
[4294670.146000] PCI quirk: region 0500-053f claimed by ICH4 GPIO
[4294670.146000] Boot video device is 0000:01:00.0
[4294670.147000] PCI: Transparent bridge - 0000:00:1e.0
[4294670.147000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294670.149000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[4294670.150000] ACPI: Power Resource [FDDP] (off)
[4294670.150000] ACPI: Power Resource [URP1] (off)
[4294670.151000] ACPI: Power Resource [URP2] (off)
[4294670.151000] ACPI: Power Resource [LPTP] (off)
[4294670.152000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11
12 14 15)
[4294670.153000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11
12 14 15)
[4294670.153000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11
12 14 15) *0, disabled.
[4294670.153000] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 9 10 11
12 14 15)
[4294670.154000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11
12 14 15) *0, disabled.
[4294670.154000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11
12 14 15)
[4294670.154000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11
12 14 15)
[4294670.155000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11
12 14 15)
[4294670.155000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294670.155000] pnp: PnP ACPI init
[4294670.155000] pnp: PnPACPI: unknown resource type 7
[4294670.155000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0200
[4294670.155000] pnp: PnPACPI: unknown resource type 7
[4294670.155000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0b00
[4294670.155000] pnp: PnPACPI: unknown resource type 7
[4294670.155000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0800
[4294670.155000] pnp: PnPACPI: unknown resource type 7
[4294670.155000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c04
[4294670.155000] pnp: PnPACPI: unknown resource type 7
[4294670.155000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0f03
[4294670.155000] pnp: PnPACPI: unknown resource type 7
[4294670.155000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0303
[4294670.156000] pnp: PnPACPI: unknown resource type 7
[4294670.156000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0700
[4294670.156000] pnp: PnPACPI: unknown resource type 7
[4294670.156000] pnp: PnPACPI: METHOD_NAME__CRS failure for INT0800
[4294670.157000] pnp: PnPACPI: unknown resource type 7
[4294670.157000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
[4294670.157000] pnp: PnP ACPI: found 0 devices
[4294670.157000] PnPBIOS: Disabled by ACPI PNP
[4294670.157000] PCI: Using ACPI for IRQ routing
[4294670.157000] PCI: If a device doesn't work, try "pci=routeirq".  If it
helps, post a report
[4294670.165000] PCI: Bridge: 0000:00:01.0
[4294670.165000]   IO window: disabled.
[4294670.165000]   MEM window: fc700000-fe7fffff
[4294670.165000]   PREFETCH window: bc400000-dc4fffff
[4294670.165000] PCI: Bridge: 0000:00:1e.0
[4294670.165000]   IO window: d000-dfff
[4294670.165000]   MEM window: fe800000-feafffff
[4294670.165000]   PREFETCH window: dc500000-dc5fffff
[4294670.165000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294670.166000] audit: initializing netlink socket (disabled)
[4294670.166000] audit(1143377448.165:1): initialized
[4294670.166000] highmem bounce pool size: 64 pages
[4294670.166000] VFS: Disk quotas dquot_6.5.1
[4294670.166000] Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[4294670.166000] Initializing Cryptographic API
[4294670.166000] io scheduler noop registered
[4294670.166000] io scheduler anticipatory registered
[4294670.166000] io scheduler deadline registered
[4294670.166000] io scheduler cfq registered
[4294670.167000] isapnp: Scanning for PnP cards...
[4294670.526000] isapnp: No Plug & Play device found
[4294670.552000] PNP: No PS/2 controller found. Probing ports directly.
[4294670.555000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294670.555000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294670.555000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ
sharing enabled
[4294670.559000] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[4294670.559000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294670.559000] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[4294670.559000] ACPI: bus type ide registered
[4294670.559000] mice: PS/2 mouse device common for all mice
[4294670.560000] EISA: Probing bus 0 at eisa.0
[4294670.560000] EISA: Detected 0 cards.
[4294670.560000] NET: Registered protocol family 2
[4294670.569000] IP route cache hash table entries: 65536 (order: 6,
262144 bytes)
[4294670.569000] TCP established hash table entries: 262144 (order: 8,
1048576 bytes)
[4294670.570000] TCP bind hash table entries: 65536 (order: 6, 262144
bytes)
[4294670.571000] TCP: Hash tables configured (established 262144 bind
65536)
[4294670.571000] TCP reno registered
[4294670.571000] TCP bic registered
[4294670.571000] NET: Registered protocol family 1
[4294670.571000] NET: Registered protocol family 8
[4294670.571000] NET: Registered protocol family 20
[4294670.571000] Using IPI Shortcut mode
[4294670.571000] ACPI wakeup devices:
[4294670.571000] PBTN PCI1  USB USB2  AC9  SMB
[4294670.571000] ACPI: (supports S0 S1 S4 S5)
[4294670.571000] Freeing unused kernel memory: 288k freed
[4294670.677000] vga16fb: initializing
[4294670.677000] vga16fb: mapped to 0xc00a0000
[4294670.747000] input: AT Translated Set 2 keyboard as
/class/input/input0
[4294670.838000] Console: switching to colour frame buffer device 80x25
[4294670.838000] fb0: VGA16 VGA frame buffer device
[4294671.975000] Capability LSM initialized
[4294673.091000] SCSI subsystem initialized
[4294673.097000] ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level,
low) -> IRQ 169
[4294688.309000] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev
7.0
[4294688.309000]         <Adaptec 3960D Ultra160 SCSI adapter>
[4294688.309000]         aic7899: Ultra160 Wide Channel A, SCSI Id=7,
32/253 SCBs
[4294688.309000]
[4294692.166000] ACPI: PCI Interrupt 0000:02:0d.1[B] -> GSI 22 (level,
low) -> IRQ 177
[4294707.377000] scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev
7.0
[4294707.377000]         <Adaptec 3960D Ultra160 SCSI adapter>
[4294707.377000]         aic7899: Ultra160 Wide Channel B, SCSI Id=7,
32/253 SCBs
[4294707.377000]
[4294708.152000]   Vendor: IBM       Model: DPSS-309170N      Rev: S96H
[4294708.152000]   Type:   Direct-Access                      ANSI SCSI
revision: 03
[4294708.152000] scsi1:A:3:0: Tagged Queuing enabled.  Depth 8
[4294708.152000]  target1:0:3: Beginning Domain Validation
[4294708.155000]  target1:0:3: wide asynchronous.
[4294708.157000]  target1:0:3: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns,
offset 63)
[4294708.169000]  target1:0:3: Ending Domain Validation
[4294708.686000] SCSI device sda: 17916240 512-byte hdwr sectors (9173
MB)
[4294709.201000] SCSI device sda: drive cache: write back
[4294709.716000] SCSI device sda: 17916240 512-byte hdwr sectors (9173
MB)
[4294710.231000] SCSI device sda: drive cache: write back
[4294710.231000]  sda: sda1 sda2 < sda5 >
[4294711.017000] sd 1:0:3:0: Attached scsi disk sda
[4294711.345000] ICH2: IDE controller at PCI slot 0000:00:1f.1
[4294711.345000] ICH2: chipset revision 4
[4294711.345000] ICH2: not 100% native mode: will probe irqs later
[4294711.345000]     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings:
hda:DMA, hdb:pio
[4294711.345000] Probing IDE interface ide0...
[4294712.017000] hda: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive
[4294712.323000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294712.337000] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache,
UDMA(66)
[4294712.337000] Uniform CD-ROM driver Revision: 3.20
[4294712.462000] usbcore: registered new driver usbfs
[4294712.462000] usbcore: registered new driver hub
[4294712.465000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller
(OHCI) Driver (PCI)
[4294712.465000] ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level,
low) -> IRQ 177
[4294712.465000] ohci_hcd 0000:02:0a.0: OHCI Host Controller
[4294712.466000] ohci_hcd 0000:02:0a.0: new USB bus registered, assigned
bus number 1
[4294712.466000] ohci_hcd 0000:02:0a.0: irq 177, io mem 0xfeafc000
[4294712.509000] USB Universal Host Controller Interface driver v2.3
[4294712.510000] ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level,
low) -> IRQ 185
[4294712.510000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[4294712.510000] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[4294712.511000] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned
bus number 2
[4294712.511000] uhci_hcd 0000:00:1f.2: irq 185, io base 0x0000ef40
[4294712.511000] hub 2-0:1.0: USB hub found
[4294712.511000] hub 2-0:1.0: 2 ports detected
[4294712.612000] ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level,
low) -> IRQ 193
[4294712.612000] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[4294712.612000] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[4294712.612000] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned
bus number 3
[4294712.612000] uhci_hcd 0000:00:1f.4: irq 193, io base 0x0000ef80
[4294712.612000] hub 3-0:1.0: USB hub found
[4294712.612000] hub 3-0:1.0: 2 ports detected
[4294712.713000] hub 1-0:1.0: USB hub found
[4294712.713000] hub 1-0:1.0: 3 ports detected
[4294712.814000] ACPI: PCI Interrupt 0000:02:0a.1[B] -> GSI 23 (level,
low) -> IRQ 193
[4294712.814000] ohci_hcd 0000:02:0a.1: OHCI Host Controller
[4294712.814000] ohci_hcd 0000:02:0a.1: new USB bus registered, assigned
bus number 4
[4294712.814000] ohci_hcd 0000:02:0a.1: irq 193, io mem 0xfeafd000
[4294712.818000] usb 2-1: new low speed USB device using uhci_hcd and
address 2
[4294712.895000] hub 4-0:1.0: USB hub found
[4294712.895000] hub 4-0:1.0: 2 ports detected
[4294713.001000] ACPI: PCI Interrupt 0000:02:0a.2[C] -> GSI 17 (level,
low) -> IRQ 201
[4294713.001000] ehci_hcd 0000:02:0a.2: EHCI Host Controller
[4294713.022000] ehci_hcd 0000:02:0a.2: new USB bus registered, assigned
bus number 5
[4294713.022000] ehci_hcd 0000:02:0a.2: irq 201, io mem 0xfeafec00
[4294713.022000] ehci_hcd 0000:02:0a.2: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[4294713.022000] hub 5-0:1.0: USB hub found
[4294713.022000] hub 5-0:1.0: 5 ports detected
[4294713.204000] usb 2-2: new full speed USB device using uhci_hcd and
address 3[4294713.333000] usbcore: registered new driver hiddev
[4294713.991000] hiddev96: USB HID v1.10 Device [American Power Conversion
Back-UPS BR  800 FW:9.o2 .D USB FW:o2 ] on usb-0000:00:1f.2-1
[4294713.991000] usbcore: registered new driver usbhid
[4294713.991000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[4294714.012000] Probing IDE interface ide1...
[4294714.301000] usb 5-2: new high speed USB device using ehci_hcd and
address 2[4294714.415000] hub 5-2:1.0: USB hub found
[4294714.416000] hub 5-2:1.0: 4 ports detected
[4294714.594000] Attempting manual resume
[4294714.630000] EXT3-fs: mounted filesystem with ordered data mode.
[4294714.668000] kjournald starting.  Commit interval 5 seconds
[4294714.849000] usb 5-2.1: new full speed USB device using ehci_hcd and
address 4
[4294715.135000] usb 5-2.4: new full speed USB device using ehci_hcd and
address 5
[4294715.447000] usb 1-3: new full speed USB device using ohci_hcd and
address 2[4294715.585000] hub 1-3:1.0: USB hub found
[4294715.588000] hub 1-3:1.0: 4 ports detected
[4294715.898000] usb 1-3.4: new low speed USB device using ohci_hcd and
address 3
[4294716.014000] input: Logitech USB-PS/2 Optical Mouse as
/class/input/input1
[4294716.014000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical
Mouse] on usb-0000:02:0a.0-3.4
[4294723.591000] ts: Compaq touchscreen protocol output
[4294724.972000] sd 1:0:3:0: Attached scsi generic sg0 type 0
[4294726.491000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294726.514000] shpchp: Standard Hot Plug PCI Controller Driver version:
0.4
[4294726.529000] Linux agpgart interface v0.101 (c) Dave Jones
[4294726.558000] agpgart: Detected an Intel i850 Chipset.
[4294726.574000] agpgart: AGP aperture is 256M @ 0xe0000000
[4294726.574000] hw_random hardware driver 1.0.0 loaded
[4294727.216000] nvidia: module license 'NVIDIA' taints kernel.
[4294727.257000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level,
low) -> IRQ 209
[4294727.258000] NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 
1.0-8178 Wed Dec 14 16:22:51 PST 2005
[4294727.465000] gameport: EMU10K1 is pci0000:02:09.1/gameport0, io
0xdff0, speed 917kHz
[4294728.040000] 8139too Fast Ethernet driver 0.9.27
[4294728.040000] ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 17 (level,
low) -> IRQ 201
[4294728.041000] eth0: RealTek RTL8139 at 0xf89da800, 00:e0:4c:e2:5e:32,
IRQ 201[4294728.041000] eth0:  Identified 8139 chip type 'RTL-8139C'
[4294728.046000] ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 21 (level,
low) -> IRQ 169
[4294728.234000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294728.512000] input: Wacom Intuos3 9x12 as /class/input/input2
[4294728.541000] usbcore: registered new driver wacom
[4294728.541000] drivers/usb/input/wacom.c: v1.44:USB Wacom Graphire and
Wacom Intuos tablet driver
[4294729.342000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294729.419000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional
printer dev 5 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[4294729.419000] usbcore: registered new driver usblp
[4294729.419000] drivers/usb/class/usblp.c: v0.13: USB Printer Device
Class driver
[4294729.913000] lp: driver loaded but no devices found
[4294730.026000] Adding 401584k swap on /dev/sda5.  Priority:-1 extents:1
across:401584k
[4294730.336000] EXT3 FS on sda1, internal journal
[4294730.461000] NET: Registered protocol family 17
[4294730.690000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294730.690000] md: bitmap version 4.39
[4294731.980000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
dm-devel@redhat.com
[4294733.504000] cdrom: open failed.
[4294735.511000] NET: Registered protocol family 10
[4294735.511000] lo: Disabled Privacy Extensions
[4294735.511000] IPv6 over IPv4 tunneling driver
[4294736.723000] ACPI: Power Button (FF) [PWRF]
[4294736.723000] ACPI: Power Button (CM) [PBTN]
[4294736.872000] ibm_acpi: ec object not found
[4294745.700000] eth0: no IPv6 routers present
[4294745.734000] agpgart: Found an AGP 2.0 compliant device at
0000:00:00.0.
[4294745.734000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x
mode
[4294745.735000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x
mode
[4294746.175000] agpgart: Found an AGP 2.0 compliant device at
0000:00:00.0.
[4294746.175000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x
mode
[4294746.175000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x
mode
[4294748.664000] apm: BIOS version 1.2 Flags 0x0b (Driver version 1.16ac)
[4294748.665000] apm: overridden by ACPI.
[4294749.039000] hda: drive_cmd: status=0x51 { DriveReady SeekComplete
Error }
[4294749.039000] hda: drive_cmd: error=0x04 { AbortedCommand }
[4294749.039000] ide: failed opcode was: 0xec
[4294749.048000] hda: drive_cmd: status=0x41 { DriveReady Error }
[4294749.048000] hda: drive_cmd: error=0x04 { AbortedCommand }
[4294749.048000] ide: failed opcode was: 0xe3
[4294749.076000] hda: drive_cmd: status=0x51 { DriveReady SeekComplete
Error }
[4294749.076000] hda: drive_cmd: error=0x04 { AbortedCommand }
[4294749.076000] ide: failed opcode was: 0xec
[4294749.083000] hda: drive_cmd: status=0x41 { DriveReady Error }
[4294749.083000] hda: drive_cmd: error=0x04 { AbortedCommand }
[4294749.083000] ide: failed opcode was: 0xef
[4294751.054000] Bluetooth: Core ver 2.8
[4294751.054000] NET: Registered protocol family 31
[4294751.054000] Bluetooth: HCI device and connection manager initialized
[4294751.054000] Bluetooth: HCI socket layer initialized
[4294751.272000] Bluetooth: L2CAP ver 2.8
[4294751.272000] Bluetooth: L2CAP socket layer initialized
[4294751.284000] Bluetooth: RFCOMM socket layer initialized
[4294751.284000] Bluetooth: RFCOMM TTY layer initialized
[4294751.284000] Bluetooth: RFCOMM ver 1.7
[4294758.344000] eth0: no IPv6 routers present
[4296517.890000] agpgart: Found an AGP 2.0 compliant device at
0000:00:00.0.
[4296517.890000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x
mode
[4296517.890000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x
mode
[4297673.649000] Real Time Clock Driver v1.12
[4304406.292000] cdrom: This disc doesn't have any tracks I recognize!
[4343783.464000] scsi: unknown opcode 0xed
[4343783.509000] scsi: unknown opcode 0xe9
[4344578.158000] snd_layla24: disagrees about version of symbol
snd_rawmidi_receive
[4344578.158000] snd_layla24: Unknown symbol snd_rawmidi_receive
[4344578.159000] snd_layla24: disagrees about version of symbol
snd_rawmidi_transmit_empty
[4344578.159000] snd_layla24: Unknown symbol snd_rawmidi_transmit_empty
[4344578.159000] snd_layla24: disagrees about version of symbol
snd_ctl_add
[4344578.159000] snd_layla24: Unknown symbol snd_ctl_add
[4344578.159000] snd_layla24: disagrees about version of symbol
snd_pcm_new
[4344578.159000] snd_layla24: Unknown symbol snd_pcm_new
[4344578.160000] snd_layla24: disagrees about version of symbol
snd_card_register
[4344578.160000] snd_layla24: Unknown symbol snd_card_register
[4344578.160000] snd_layla24: disagrees about version of symbol
snd_card_free
[4344578.160000] snd_layla24: Unknown symbol snd_card_free
[4344578.160000] snd_layla24: disagrees about version of symbol
snd_interval_refine
[4344578.160000] snd_layla24: Unknown symbol snd_interval_refine
[4344578.161000] snd_layla24: disagrees about version of symbol
snd_pcm_format_physical_width
[4344578.161000] snd_layla24: Unknown symbol
snd_pcm_format_physical_width
[4344578.161000] snd_layla24: disagrees about version of symbol
snd_pcm_set_sync[4344578.161000] snd_layla24: Unknown symbol
snd_pcm_set_sync
[4344578.161000] snd_layla24: Unknown symbol snd_verbose_printk
[4344578.162000] snd_layla24: disagrees about version of symbol
snd_ctl_new1
[4344578.162000] snd_layla24: Unknown symbol snd_ctl_new1
[4344578.162000] snd_layla24: disagrees about version of symbol
snd_rawmidi_transmit_ack
[4344578.162000] snd_layla24: Unknown symbol snd_rawmidi_transmit_ack
[4344578.162000] snd_layla24: disagrees about version of symbol
snd_pcm_hw_rule_add
[4344578.162000] snd_layla24: Unknown symbol snd_pcm_hw_rule_add
[4344578.163000] snd_layla24: disagrees about version of symbol
snd_card_new
[4344578.163000] snd_layla24: Unknown symbol snd_card_new
[4344578.163000] snd_layla24: disagrees about version of symbol
snd_pcm_lib_malloc_pages
[4344578.163000] snd_layla24: Unknown symbol snd_pcm_lib_malloc_pages
[4344578.163000] snd_layla24: disagrees about version of symbol
snd_pcm_lib_ioctl
[4344578.163000] snd_layla24: Unknown symbol snd_pcm_lib_ioctl
[4344578.164000] snd_layla24: disagrees about version of symbol
snd_pcm_lib_free_pages
[4344578.164000] snd_layla24: Unknown symbol snd_pcm_lib_free_pages
[4344578.164000] snd_layla24: disagrees about version of symbol
snd_rawmidi_transmit_peek
[4344578.164000] snd_layla24: Unknown symbol snd_rawmidi_transmit_peek
[4344578.164000] snd_layla24: disagrees about version of symbol
snd_ctl_notify
[4344578.165000] snd_layla24: Unknown symbol snd_ctl_notify
[4344578.165000] snd_layla24: disagrees about version of symbol
snd_pcm_set_ops
[4344578.165000] snd_layla24: Unknown symbol snd_pcm_set_ops
[4344578.165000] snd_layla24: disagrees about version of symbol
snd_pcm_hw_constraint_list
[4344578.165000] snd_layla24: Unknown symbol snd_pcm_hw_constraint_list
[4344578.165000] snd_layla24: disagrees about version of symbol
snd_device_new
[4344578.166000] snd_layla24: Unknown symbol snd_device_new
[4344578.166000] snd_layla24: disagrees about version of symbol
snd_pcm_sgbuf_ops_page
[4344578.166000] snd_layla24: Unknown symbol snd_pcm_sgbuf_ops_page
[4344578.166000] snd_layla24: disagrees about version of symbol
snd_rawmidi_new
[4344578.166000] snd_layla24: Unknown symbol snd_rawmidi_new
[4344578.167000] snd_layla24: disagrees about version of symbol
snd_pcm_hw_constraint_integer
[4344578.167000] snd_layla24: Unknown symbol
snd_pcm_hw_constraint_integer
[4344578.167000] snd_layla24: disagrees about version of symbol
snd_rawmidi_set_ops
[4344578.168000] snd_layla24: Unknown symbol snd_rawmidi_set_ops
[4344578.168000] snd_layla24: disagrees about version of symbol
snd_pcm_lib_preallocate_pages
[4344578.168000] snd_layla24: Unknown symbol
snd_pcm_lib_preallocate_pages
[4344578.168000] snd_layla24: disagrees about version of symbol
snd_pcm_period_elapsed
[4344578.169000] snd_layla24: Unknown symbol snd_pcm_period_elapsed
[4344578.169000] snd_layla24: disagrees about version of symbol
snd_pcm_hw_constraint_step
[4344578.169000] snd_layla24: Unknown symbol snd_pcm_hw_constraint_step

Issue History
Date Modified  Username       Field                    Change              
======================================================================
02-16-06 13:05 coz            New Issue                                    
02-16-06 13:05 coz            Distribution              => ubuntu/breezy/Debian
02-16-06 13:05 coz            Kernel Version            => 2.6.12.10.386   
02-18-06 13:34 pochini        Note Added: 0008119                          
02-20-06 03:30 coz            Note Added: 0008140                          
02-20-06 22:02 pochini        Note Added: 0008150                          
03-13-06 19:49 coz            Note Added: 0008456                          
03-13-06 22:38 pochini        Note Added: 0008465                          
03-13-06 23:02 johnrigg       Note Added: 0008466                          
03-16-06 14:54 coz            Note Added: 0008605                          
03-18-06 22:02 pochini        Note Added: 0008676                          
03-18-06 22:07 pochini        Note Edited: 0008676                         
03-19-06 16:05 coz            Note Added: 0008690                          
03-20-06 22:10 pochini        Note Added: 0008725                          
03-22-06 02:38 coz            Note Added: 0008781                          
03-22-06 02:48 rlrevell       Note Added: 0008787                          
03-25-06 12:04 pochini        Note Added: 0008945                          
03-27-06 05:04 coz            Note Added: 0008988                          
======================================================================




-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642