From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
To: mac.chiang@intel.com, alsa-devel@alsa-project.org
Cc: broonie@kernel.org, chintan.m.patel@intel.com, jenny.tc@intel.com
Subject: Re: [PATCH RESEND v4] ASoC: Intel: boards: kbl_da7219_max98927: add dai_trigger function
Date: Fri, 3 May 2019 08:56:37 -0500 [thread overview]
Message-ID: <da67f9fb-53c2-dec7-51e3-41ba635e5c27@linux.intel.com> (raw)
In-Reply-To: <1556851697-301-1-git-send-email-mac.chiang@intel.com>
On 5/2/19 9:48 PM, mac.chiang@intel.com wrote:
> From: Mac Chiang <mac.chiang@intel.com>
>
> amplifier feedback is not modeled as being dependent on any active
> output. Even when there is no playback happening, parts of the graph,
> specifically the IV sense->speaker protection->output remains active
> and this prevents the DSP from entering low-power states.
>
> This patch suggest a machine driver level approach where the speaker
> pins are enabled/disabled dynamically depending on stream start/stop
> events. DPAM graph representations show the feedback loop is indeed
> disabled and low-power states can be reached.
>
> Signed-off-by: Jenny TC <jenny.tc@intel.com>
> Signed-off-by: Harshapriya.n <harshapriya.n@intel.com>
> Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
> ---
> Changelog:
> v4:
> - Changed device name in in kabylake_ssp0_trigger to address a
> conflict with recently merged patch
> MAXIM_DEV0_NAME -> MAX98927_DEV0_NAME ...
> v3:
> - fixed the return logic at the end of kabylake_card_late_probe()
> v2:
> - described clearly in commit message
> - added snd_soc_dapm_disable_pin in kabylake_card_late_probe()
> ---
> ---
> sound/soc/intel/boards/kbl_da7219_max98927.c | 73 +++++++++++++++++++++++++++-
> 1 file changed, 71 insertions(+), 2 deletions(-)
>
> diff --git a/sound/soc/intel/boards/kbl_da7219_max98927.c b/sound/soc/intel/boards/kbl_da7219_max98927.c
> index f72a7bf..1efe7fd 100644
> --- a/sound/soc/intel/boards/kbl_da7219_max98927.c
> +++ b/sound/soc/intel/boards/kbl_da7219_max98927.c
> @@ -219,8 +219,60 @@ static int kabylake_ssp0_hw_params(struct snd_pcm_substream *substream,
> return 0;
> }
>
> +static int kabylake_ssp0_trigger(struct snd_pcm_substream *substream, int cmd)
> +{
> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> + int j, ret;
> +
> + for (j = 0; j < rtd->num_codecs; j++) {
> + struct snd_soc_dai *codec_dai = rtd->codec_dais[j];
> + const char *name = codec_dai->component->name;
> + struct snd_soc_component *component = codec_dai->component;
> + struct snd_soc_dapm_context *dapm =
> + snd_soc_component_get_dapm(component);
> + char pin_name[20];
> +
> + if (strcmp(name, MAX98927_DEV0_NAME) &&
> + strcmp(name, MAX98927_DEV1_NAME) &&
> + strcmp(name, MAX98373_DEV0_NAME) &&
> + strcmp(name, MAX98373_DEV1_NAME))
> + continue;
> +
> + snprintf(pin_name, ARRAY_SIZE(pin_name), "%s Spk",
> + codec_dai->component->name_prefix);
> +
> + switch (cmd) {
> + case SNDRV_PCM_TRIGGER_START:
> + case SNDRV_PCM_TRIGGER_RESUME:
> + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
> + ret = snd_soc_dapm_enable_pin(dapm, pin_name);
> + if (ret) {
> + dev_err(rtd->dev, "failed to enable %s: %d\n",
> + pin_name, ret);
> + return ret;
> + }
> + snd_soc_dapm_sync(dapm);
> + break;
> + case SNDRV_PCM_TRIGGER_STOP:
> + case SNDRV_PCM_TRIGGER_SUSPEND:
> + case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
> + ret = snd_soc_dapm_disable_pin(dapm, pin_name);
> + if (ret) {
> + dev_err(rtd->dev, "failed to disable %s: %d\n",
> + pin_name, ret);
> + return ret;
> + }
> + snd_soc_dapm_sync(dapm);
> + break;
> + }
> + }
> +
> + return 0;
> +}
> +
> static struct snd_soc_ops kabylake_ssp0_ops = {
> .hw_params = kabylake_ssp0_hw_params,
> + .trigger = kabylake_ssp0_trigger,
> };
>
> static int kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd,
> @@ -950,6 +1002,7 @@ static int kabylake_card_late_probe(struct snd_soc_card *card)
> {
> struct kbl_codec_private *ctx = snd_soc_card_get_drvdata(card);
> struct kbl_hdmi_pcm *pcm;
> + struct snd_soc_dapm_context *dapm = &card->dapm;
> struct snd_soc_component *component = NULL;
> int err, i = 0;
> char jack_name[NAME_SIZE];
> @@ -976,9 +1029,25 @@ static int kabylake_card_late_probe(struct snd_soc_card *card)
> if (!component)
> return -EINVAL;
>
> - return hdac_hdmi_jack_port_init(component, &card->dapm);
>
> - return 0;
> + err = hdac_hdmi_jack_port_init(component, &card->dapm);
> +
> + if (err < 0)
> + return err;
> +
> + err = snd_soc_dapm_disable_pin(dapm, "Left Spk");
> + if (err) {
> + dev_err(card->dev, "failed to disable Left Spk: %d\n", err);
> + return err;
> + }
> +
> + err = snd_soc_dapm_disable_pin(dapm, "Right Spk");
> + if (err) {
> + dev_err(card->dev, "failed to disable Right Spk: %d\n", err);
> + return err;
> + }
> +
> + return snd_soc_dapm_sync(dapm);
> }
>
> /* kabylake audio machine driver for SPT + DA7219 */
>
next prev parent reply other threads:[~2019-05-03 13:56 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-03 2:48 [PATCH RESEND v4] ASoC: Intel: boards: kbl_da7219_max98927: add dai_trigger function mac.chiang
2019-05-03 13:56 ` Pierre-Louis Bossart [this message]
2019-05-06 15:03 ` Applied "ASoC: Intel: boards: kbl_da7219_max98927: add dai_trigger function" to the asoc tree Mark Brown
2019-05-07 2:29 ` Mark Brown
2019-05-07 2:30 ` Mark Brown
2019-05-07 2:32 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=da67f9fb-53c2-dec7-51e3-41ba635e5c27@linux.intel.com \
--to=pierre-louis.bossart@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=chintan.m.patel@intel.com \
--cc=jenny.tc@intel.com \
--cc=mac.chiang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).