From: Federico Quagliata <federico@quagliata.org>
To: alsa-devel@lists.sourceforge.net
Subject: HP dv6000t
Date: Mon, 20 Nov 2006 21:09:15 +0100 [thread overview]
Message-ID: <ejt21b$qit$1@sea.gmane.org> (raw)
In-Reply-To: 1164046446.5390.234.camel@razman
Hi Tobin... I wrote you a private mail, but I'm not sure you got it as I had
problem with my mail server.
Here it is:
> I have a HP dv6000t laptop with 1 mic-in, 1-hp-out and 1-hp-spdif-out.
>
> I use the latest alsa-drivers from the hg repository.
>
> What works
> - With model=hp-laptop sound from speakers is correctly muted when I
> plug the hp jack in both hp and spdif out. Headphones do work.
>
> What doesn't
> - The laptop has a "mute" orange led on the mute button that stays
> always on, even when mute is off;
> - mute on master only actually mute the line-out, not the
> integrated speakers;
> - recording: neither from line-in nor the internal mic.
>
>
> System informations
>
> dmesg
> ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 20
> PCI: Setting latency timer of device 0000:00:1b.0 to 64
>
>
> lspci -s 0:1b -vn
> 00:1b.0 0403: 8086:27d8 (rev 02)
> Subsystem: 103c:30bb
> Flags: bus master, fast devsel, latency 0, IRQ 20
> Memory at de300000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: [50] Power Management version 2
> Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
> Queue=0/0 Enable-
> Capabilities: [70] Express Unknown type IRQ 0
> Capabilities: [100] Virtual Channel
> Capabilities: [130] Unknown (5)
>
>
> cat /proc/asound/card0/codec#0
> Codec: Conexant CXT5045
> Address: 0
> Vendor Id: 0x14f15045
> Subsystem Id: 0x103c30bb
> Revision Id: 0x100100
> Default PCM:
> rates [0x140]: 48000 96000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Default Amp-In caps: N/A
> Default Amp-Out caps: N/A
> Node 0x10 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
> Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1
> Amp-Out vals: [0x9c 0x9c]
> Pincap 0x0810014: OUT EAPD Detect
> Pin Default 0x90170110: [Fixed] Speaker at Int N/A
> Conn = Analog, Color = Unknown
> Pin-ctls: 0x40: OUT
> Power: 0x0
> Connection: 2
> 0x19* 0x17
> Node 0x11 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
> Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1
> Amp-Out vals: [0x1c 0x1c]
> Pincap 0x08113c: IN OUT HP Detect
> Pin Default 0x0121401f: [Jack] HP Out at Ext Rear
> Conn = 1/8, Color = Green
> Pin-ctls: 0x40: OUT
> Power: 0x0
> Connection: 2
> 0x19* 0x17
> Node 0x12 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
> Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1
> Amp-Out vals: [0xab 0xab]
> Pincap 0x08113c: IN OUT HP Detect
> Pin Default 0x01813030: [Jack] Line In at Ext Rear
> Conn = 1/8, Color = Blue
> Pin-ctls: 0x20: IN
> Power: 0x0
> Connection: 2
> 0x19* 0x17
> Node 0x13 [Pin Complex] wcaps 0x400301: Stereo Digital
> Pincap 0x0810: OUT
> Pin Default 0x21447040: [Jack] SPDIF Out at Sep Rear
> Conn = RCA, Color = Yellow
> Pin-ctls: 0x00:
> Connection: 1
> 0x18
> Node 0x14 [Pin Complex] wcaps 0x400081: Stereo
> Pincap 0x081124: IN Detect
> Pin Default 0x97a70050: [Fixed] Mic at Int Riser
> Conn = Analog, Color = Unknown
> Pin-ctls: 0x20: IN
> Node 0x15 [Pin Complex] wcaps 0x400001: Stereo
> Pincap 0x0820: IN
> Pin Default 0x99330060: [Fixed] CD at Int ATAPI
> Conn = ATAPI, Color = Unknown
> Pin-ctls: 0x00:
> Node 0x16 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
> Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0b, mute=1
> Amp-Out vals: [0x06]
> Node 0x17 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
> Amp-In caps: ofs=0x14, nsteps=0x2b, stepsize=0x05, mute=1
> Amp-In vals: [0x17 0x17] [0x94 0x94] [0x94 0x94] [0x94 0x94] [0x94
> 0x94]
> Power: 0x0
> Connection: 5
> 0x19 0x14 0x12 0x11 0x15
> Node 0x18 [Audio Output] wcaps 0x211: Stereo Digital
> PCM:
> rates [0x40]: 48000
> bits [0x6]: 16 20
> formats [0x5]: PCM AC3
> Node 0x19 [Audio Output] wcaps 0xc11: Stereo
> PCM:
> rates [0x540]: 48000 96000 192000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Power: 0x0
> Node 0x1a [Audio Input] wcaps 0x100d0b: Stereo Amp-In
> Amp-In caps: ofs=0x00, nsteps=0x17, stepsize=0x05, mute=1
> Amp-In vals: [0x80 0x80] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00
> 0x00]
> Power: 0x0
> Connection: 5
> 0x17 0x14* 0x12 0x11 0x15
> Node 0x1b [Vendor Defined Widget] wcaps 0xf00000: Mono
Greetings,
Federico
--
On the web: http://www.quaqo.org - OpenPGP KeyID: 0x1D535856
Jabber: quaqo@jabber.org - MSN: quaqo@msn.com - ICQ: 48618109
Linux User: #263663 / Machine: #341187 (Arch Linux / Gimmick)
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
prev parent reply other threads:[~2006-11-20 20:09 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-11-20 18:08 alsa conexant HP dv2035LA Antonio Sampayo
2006-11-20 18:14 ` Tobin Davis
2006-11-20 20:09 ` Federico Quagliata [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='ejt21b$qit$1@sea.gmane.org' \
--to=federico@quagliata.org \
--cc=alsa-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox