From: drago01 <drago01@gmail.com>
To: alsa-devel@alsa-project.org
Cc: Takashi Iwai <tiwai@suse.de>
Subject: Re: HP 6930p mute button/led out of sync; fixed by suspend/resume cycle
Date: Sun, 10 Jan 2010 15:34:02 +0100 [thread overview]
Message-ID: <f6ca9fed1001100634y5a25fd13w9d113b28104ddb31@mail.gmail.com> (raw)
In-Reply-To: <f6ca9fed1001100631i46e97d01j17ec5ff4b34cbfd0@mail.gmail.com>
On Sun, Jan 10, 2010 at 3:31 PM, drago01 <drago01@gmail.com> wrote:
> Hi,
>
> I experience an odd issue with my HP6930p laptop.
>
> After boot pressing the mute button/led causes the audio to be muted
> but the sate is not reflected in software (i.e the mixer does not show
> the control as muted).
> However pressing after a suspend/resume cycle it works as expected.
> The hardware mute button/led and the software control are in sync
> (pressing the hw button toggles the mixer to mute/unmute; muting the
> software mixer results into the led turning red).
>
> This was with 2.6.31.9 and 2.6.32.1; also installing alsa-drivers from
> source does not change this.
>
> It seems something is not initialized correctly during boot up but is
> done on resume, any pointers on how to debug this?
>
(Resending to correct list)
next parent reply other threads:[~2010-01-10 14:34 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <f6ca9fed1001100631i46e97d01j17ec5ff4b34cbfd0@mail.gmail.com>
2010-01-10 14:34 ` drago01 [this message]
2010-01-12 9:14 ` HP 6930p mute button/led out of sync; fixed by suspend/resume cycle Takashi Iwai
2010-02-12 19:38 ` drago01
2010-02-12 20:20 ` Takashi Iwai
2010-02-12 20:33 ` drago01
2010-02-12 21:26 ` drago01
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f6ca9fed1001100634y5a25fd13w9d113b28104ddb31@mail.gmail.com \
--to=drago01@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).