From mboxrd@z Thu Jan 1 00:00:00 1970 From: bugtrack@alsa-project.org Subject: [ALSA - driver 0001347]: unable to configure sound card Date: Tue, 23 Aug 2005 16:40:34 +0200 Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: Received: from bugtrack.alsa-project.org (gate.perex.cz [82.113.61.162]) by alsa.jcu.cz (ALSA's E-mail Delivery System) with ESMTP id 75751255 for ; Tue, 23 Aug 2005 16:40:34 +0200 (MEST) Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org A NOTE has been added to this issue. ====================================================================== ====================================================================== Reported By: CptS Assigned To: tiwai ====================================================================== Project: ALSA - driver Issue ID: 1347 Category: PCI - nm256 Reproducibility: always Severity: major Priority: normal Status: assigned Distribution: Knoppix 4.0 Kernel Version: 2.6.11 ====================================================================== Date Submitted: 08-17-2005 11:05 CEST Last Modified: 08-23-2005 16:40 CEST ====================================================================== Summary: unable to configure sound card Description: I'm having problems configuring my sound card with alsa, here are the details: the sound card is NeoMagic 256AV (NM2200) located onboard a Compaq Presario 1920. I'm currently running Knoppix 4.0 hdd installed (kernel 2.6) here's lspci -vv outputs on the cards: 0000:01:00.1 Multimedia audio controller: Neomagic Corporation NM2200 [MagicMedia 256AV Audio] (rev 20) Subsystem: Compaq Computer Corporation MagicMedia 256AV Audio Device on Durango Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- I wouldn't have addressed you unless I've already tried everything: I've tried the solution of the same problem regarding HP Omni 4150 with the same card. I used alsaconf and it tried to load snd-nm256, after loading it crashed, dmesg suggested loading it with force_ac97=1 switch but once i did it the system crashed (on 3 differet linux installations) I did a legacy scan using alsaconf for all legacy drivers. I 'modprobe'ed for hours on every imaginable option (ad1848, sb, cs423x, etc..) I've edited the modules.conf and manually defined the dma and irq I removed alsa completly and re-install it. I had debian with 2.4 kernel installed and i've upgraded to 2.6 I changed the distro from debian to Knoppix (kinda same thing but...) anyway, you get the point.. can you please assist??I'm having problems configuring my sound card with alsa, here are the details: the sound card is NeoMagic 256AV (NM2200) located onboard a Compaq Presario 1920. I'm currently running Knoppix 4.0 hdd installed (kernel 2.6) here's lspci -vv outputs on the cards: 0000:01:00.1 Multimedia audio controller: Neomagic Corporation NM2200 [MagicMedia 256AV Audio] (rev 20) Subsystem: Compaq Computer Corporation MagicMedia 256AV Audio Device on Durango Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- I wouldn't have addressed you unless I've already tried everything: I've tried the solution of the same problem regarding HP Omni 4150 with the same card. I used alsaconf and it tried to load snd-nm256, after loading it crashed, dmesg suggested loading it with force_ac97=1 switch but once i did it the system crashed (on 3 differet linux installations) I did a legacy scan using alsaconf for all legacy drivers. I 'modprobe'ed for hours on every imaginable option (ad1848, sb, cs423x, etc..) I've edited the modules.conf and manually defined the dma and irq I removed alsa completly and re-install it. I had debian with 2.4 kernel installed and i've upgraded to 2.6 I changed the distro from debian to Knoppix (kinda same thing but...) anyway, you get the point.. can you please assist??I'm having problems configuring my sound card with alsa, here are the details: the sound card is NeoMagic 256AV (NM2200) located onboard a Compaq Presario 1920. I'm currently running Knoppix 4.0 hdd installed (kernel 2.6) here's lspci -vv outputs on the cards: 0000:01:00.1 Multimedia audio controller: Neomagic Corporation NM2200 [MagicMedia 256AV Audio] (rev 20) Subsystem: Compaq Computer Corporation MagicMedia 256AV Audio Device on Durango Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- I wouldn't have addressed you unless I've already tried everything: I've tried the solution of the same problem regarding HP Omni 4150 with the same card. I used alsaconf and it tried to load snd-nm256, after loading it crashed, dmesg suggested loading it with force_ac97=1 switch but once i did it the system crashed (on 3 differet linux installations) I did a legacy scan using alsaconf for all legacy drivers. I 'modprobe'ed for hours on every imaginable option (ad1848, sb, cs423x, etc..) I've edited the modules.conf and manually defined the dma and irq I removed alsa completly and re-install it. I had debian with 2.4 kernel installed and i've upgraded to 2.6 I changed the distro from debian to Knoppix (kinda same thing but...) anyway, you get the point.. can you please assist?? ====================================================================== ---------------------------------------------------------------------- CptS - 08-22-05 22:00 ---------------------------------------------------------------------- It crashed = the system just stopped responding. no report found later in the logs. if you have any ways of logging the crash i'd be happy to hear. I didn't paste the bug 3 times... i just added 2 notes to the same bug. S. ---------------------------------------------------------------------- tiwai - 08-23-05 16:40 ---------------------------------------------------------------------- I guess this laptop has no nm256 ac97 but it's connected to cs4236 codec internally. Check your BIOS setting and try snd-cs4236 driver. Issue History Date Modified Username Field Change ====================================================================== 08-17-05 11:05 CptS New Issue 08-17-05 11:05 CptS Distribution => Knoppix 4.0 08-17-05 11:05 CptS Kernel Version => 2.6.11 08-17-05 11:24 CptS Note Added: 0005835 08-20-05 19:48 CptS Issue Monitored: CptS 08-20-05 19:50 CptS Note Added: 0005883 08-20-05 20:32 rlrevell Note Added: 0005884 08-20-05 20:37 rlrevell Note Added: 0005885 08-22-05 22:00 CptS Note Added: 0005901 08-23-05 16:40 tiwai Note Added: 0005908 ====================================================================== ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf