From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0001631]: Audiophile USB will not capture.
Date: Tue, 14 Mar 2006 17:18:16 +0100 [thread overview]
Message-ID: <fc65c54463d0dcfb95cca86aa1ca66fc@bugtrack.alsa-project.org> (raw)
The following issue has been set as RELATED TO issue 0001801.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1631>
======================================================================
Reported By: smithbone
Assigned To: Clemens Ladisch
======================================================================
Project: ALSA - driver
Issue ID: 1631
Category: USB - usb-audio
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
Distribution: 1.0.10
Kernel Version: 2.6.15-rc5-git1
======================================================================
Date Submitted: 12-08-2005 17:38 CET
Last Modified: 03-14-2006 17:18 CET
======================================================================
Summary: Audiophile USB will not capture.
Description:
If I try to capure audio from my Audiophile USB I get the following.
$ arecord -vv -D hw:1,1 -f S24_3BE -t raw -c 2 -r48000 test.raw
Its setup is:
stream : CAPTURE
access : RW_INTERLEAVED
format : S24_3BE
subformat : STD
channels : 2
rate : 48000
exact rate : 48000 (48000/1)
msbits : 24
buffer_size : 24000
period_size : 6000
period_time : 125000
tick_time : 4000
tstamp_mode : NONE
period_step : 1
sleep_min : 0
avail_min : 6000
xfer_align : 6000
start_threshold : 1
stop_threshold : 24000
silence_threshold: 0
silence_size : 0
boundary : 1572864000
arecord: pcm_read:1303: read error: Input/output error
======================================================================
Relationships ID Summary
----------------------------------------------------------------------
related to 0001801 Audiophile USB noisy analog capture
======================================================================
----------------------------------------------------------------------
sander - 12-23-05 18:40
----------------------------------------------------------------------
I mailed this analysis to the alsa-devel list two months ago. It seems to
have found a nice home here :)
SUMMARY:
- only 48001-96000hz capturing works
- only capturing through plughw:x,1 works
- format is 24/32 bits regardless of plug conversion (? at least, as
reported by audacity)
- only the signal on the jack inputs is captured
- only 2-channel capture
- only the SYNC/48001-96000/S24_3BE altset on device #1 can be captured,
only through plughw.
signal (from the jacks, not the cinch connectors)
-------------------------------------------------
s1) arecord -D plughw:0,1 -t wav -c 2 -r 96000 -f S16_LE -d 2 -vv test.wav
- output :
Plug PCM: Linear conversion PCM (S24_3BE)
Its setup is:
stream : CAPTURE
access : RW_INTERLEAVED
format : S16_LE
- audacity reports 24b/96khz
- amplitude suspects 24 bit sound despite S16_LE setting
- altset reportedly used :
Format: S24_3BE
Channels: 2
Endpoint: 5 IN (SYNC)
Rates: 48001 - 96000 (continuous)
- see (n1) and (e3)
s2) arecord -D plughw:0,1 -t wav -c 2 -r 96000 -f S32_LE -d 2 -vv
test.wav
- output :
Plug PCM: Linear conversion PCM (S24_3BE)
Its setup is:
stream : CAPTURE
access : RW_INTERLEAVED
format : S32_LE
- audacity reports 32b/96khz
- altset used same as (s1)
no signal
---------
n1) arecord -D plughw:0,1 -t raw -c 2 -r 96000 -f S24_3BE -d 2 -vv
test.raw
- output :
Plug PCM: Hardware PCM card 0 'Audiophile USB (tm)' device 1 subdevice 0
Its setup is:
stream : CAPTURE
access : RW_INTERLEAVED
format : S24_3BE
n2) arecord -D plughw:0,1 -t raw -c 2 -r 96000 -f S24_LE -d 2 -vv
test.raw
n3) arecord -D plughw:0,1 -t raw -c 2 -r 96000 -f S24_3LE -d 2 -vv
test.raw
n4) arecord -D plughw:0,1 -t raw -c 2 -r 96000 -f U24_3LE -d 2 -vv
test.raw
n5) arecord -D plughw:0,1 -t raw -c 2 -r 96000 -f U24_3BE -d 2 -vv
test.raw
errors/'lock'
-------------
e1) arecord -D plughw:0,1 -t raw -c 2 -r 48000 -f S16_LE -d 2 -vv
test.raw
- output :
Plug PCM: Linear conversion PCM (S16_BE)
Its setup is:
stream : CAPTURE
access : RW_INTERLEAVED
format : S16_LE
e2) arecord -D plughw:0,1 -t raw -c 2 -r 48000 -f S16_BE -d 2 -vv
test.raw
- output :
Plug PCM: Hardware PCM card 0 'Audiophile USB (tm)' device 1 subdevice 0
Its setup is:
stream : CAPTURE
access : RW_INTERLEAVED
format : S16_BE
e3) arecord -D plughw:0,0 -t wav -c 2 -r 96000 -f S16_LE -d 2 -vv
test.wav
e3) arecord -D plughw:0,1 -t wav -c 1 -r 96000 -f S16_LE -d 2 -vv test.wav
Issue History
Date Modified Username Field Change
======================================================================
12-08-05 17:38 smithbone New Issue
12-08-05 17:38 smithbone Distribution => 1.0.10
12-08-05 17:38 smithbone Kernel Version => 2.6.15-rc5-git1
12-23-05 18:40 sander Note Added: 0007135
03-14-06 17:17 rlrevell Relationship added related to 0001890
03-14-06 17:17 rlrevell Relationship deleted related to 0001890
03-14-06 17:18 rlrevell Relationship added related to 0001801
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
next reply other threads:[~2006-03-14 16:18 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-03-14 16:18 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-03-14 16:18 [ALSA - driver 0001631]: Audiophile USB will not capture bugtrack
2006-03-14 16:17 bugtrack
2006-03-14 16:17 bugtrack
2005-12-23 17:40 bugtrack
2005-12-08 16:38 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fc65c54463d0dcfb95cca86aa1ca66fc@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox