Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Tim Blechmann <tim@klingt.org>
To: alsa-devel@alsa-project.org
Cc: linux-pcmcia@lists.infradead.org
Subject: hard freezes with hdsp with cardbus/pci adapter card
Date: Mon, 10 Aug 2009 23:32:28 +0200	[thread overview]
Message-ID: <h5q3ur$13e$1@ger.gmane.org> (raw)


[-- Attachment #1.1: Type: text/plain, Size: 2285 bytes --]

hi all,

i have some issues with playback on one of my machines with different
kernels, having my rme hammerfall hdsp connected via a cardbus/pci
adapter card.

after some time (between a few seconds and several minutes) of flawless
playback, the system completely freezes, magic sysrq keys are not
functional either ... the freeze occurs with rt and non-rt kernels,
with jack running with and without realtime scheduling.

i have the suspicion, that it is related to the combination of the hdsp
with the cardbus controller of the adapter card ...

the interesting part of lspci is:
06:01.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller
(rev 01)
	Subsystem: ENE Technology Inc CB1410 Cardbus Controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 168, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at fb600000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
	Memory window 0: c4000000-c7fff000 (prefetchable)
	Memory window 1: c8000000-cbfff000
	I/O window 0: 0000e000-0000e0ff
	I/O window 1: 0000e400-0000e4ff
	BridgeCtl: Parity+ SERR+ ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
	16-bit legacy interface ports at 0001
	Kernel driver in use: yenta_cardbus
	Kernel modules: yenta_socket

07:00.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall
DSP (rev 0f)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 255
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at c8000000 (32-bit, non-prefetchable) [size=64K]
	Kernel driver in use: RME Hammerfall DSP
	Kernel modules: snd-hdsp

the irq 17 is used by these two devices only. i am not sure, how to
proceed debugging this, since i cannot get any useful debugging
information ...

thnx, tim

-- 
tim@klingt.org
http://tim.klingt.org

A paranoid is a man who knows a little of what's going on.
  William S. Burroughs


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

             reply	other threads:[~2009-08-10 21:37 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-08-10 21:32 Tim Blechmann [this message]
2009-08-10 21:56 ` hard freezes with hdsp with cardbus/pci adapter card Florian Faber
2009-08-11  5:06 ` Wolfram Sang
2009-08-11  6:32   ` Tim Blechmann
2009-08-11  7:26     ` Tim Blechmann
2009-08-11  9:25       ` Wolfram Sang
2009-08-11  9:47         ` Tim Blechmann
2009-08-11 15:19           ` Tim Blechmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='h5q3ur$13e$1@ger.gmane.org' \
    --to=tim@klingt.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=linux-pcmcia@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox