From mboxrd@z Thu Jan 1 00:00:00 1970 From: Angel Tsankov Subject: Re: alsactl restore: unknown hardware: ymf724f Date: Mon, 29 Mar 2010 00:37:32 +0300 Message-ID: References: <4f3252891002251511p4605f104jdac236e589d01149@mail.gmail.com> <1267193154.29204.0.camel@localhost.localdomain> <4f3252891002271729p6eb66724v62ce97ea9a6eb577@mail.gmail.com> <4f3252891003280552y29015aeav7b68e9972371325b@mail.gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Return-path: Received: from lo.gmane.org (lo.gmane.org [80.91.229.12]) by alsa0.perex.cz (Postfix) with ESMTP id 4F5C61037E3 for ; Sun, 28 Mar 2010 23:38:11 +0200 (CEST) Received: from list by lo.gmane.org with local (Exim 4.69) (envelope-from ) id 1Nw0BN-0001py-Rx for alsa-devel@alsa-project.org; Sun, 28 Mar 2010 23:38:09 +0200 Received: from 212.73.151.246 ([212.73.151.246]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Sun, 28 Mar 2010 23:38:09 +0200 Received: from fn42551 by 212.73.151.246 with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Sun, 28 Mar 2010 23:38:09 +0200 In-Reply-To: <4f3252891003280552y29015aeav7b68e9972371325b@mail.gmail.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org Raymond Yau wrote: > 2010/3/26 Angel Tsankov > = >> Hello again! >> >> I've recently had some time to investigate this problem further on and >> here's what I've discovered: >> >> Raymond Yau wrote: >>> 2010/2/26 Pacho Ramos >>> >>>> El vie, 26-02-2010 a las 13:57 +0200, Angel Tsankov escribi=F3: >>>>> Raymond Yau wrote: >>>>>> 2010/2/25 Jaroslav Kysela >>>>>> >>>>>>> On Thu, 25 Feb 2010, Angel Tsankov wrote: >>>>>>> >>>>>>>> Jaroslav Kysela wrote: >>>>>>>>> On Thu, 25 Feb 2010, Angel Tsankov wrote: >>>>>>>>> >>>>>>>>>> Hello, >>>>>>>>>> >>>>>>>>>> I run 'alsactl restore' on a machine with 2 sound cards -- a >>>> built-in >>>>>>>>>> Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller >>>> (rev >>>>>>>>>> 02) and a non-built-in Yamaha Corporation YMF-724F [DS-1 Audio >>>>>>>>>> Controller] (rev 03) -- and get the following message: >>>>>>>>>> >>>>>>>>>> Unknown hardware: "YMF724F" "SigmaTel STAC9700,83,84" >>>> "AC97a:83847600" >>>>>>>>>> "0x1073" "0x000d" >>>>>>>>>> Hardware is initialized using a guess method >>>>>>>>>> >>>>>>>>>> As a consequence the volume levels of the Yamaha card do not get >>>>>>>>>> restored to the levels stored in /etc/asound.state. The volume >>>> levels >>>>>>>>>> of the built-in card however are properly restored. The >>>> asound.state >>>>>>>>>> file has been created by executing 'alsactl store'. >>>>>>>>>> >>> your problem is "alsactl restore" become "alsactl init" when the number >> of >>> controls is more than those in state file. >> I'm not quite sure that the case is this since 'alsactl restore' does >> restore the values of the Yamaha sound card (and those of the other >> card, too) and 'alsactl restore 1' seems to just initialize the Yamaha >> card. This is with alsa-utils version 1.0.22. >> > "Hardware is initialized using a guess method " is the message used by > alsactl init > = > http://git.alsa-project.org/?p=3Dalsa-utils.git;a=3Dcommitdiff;h=3D9a7481= 78d1c9e783242f0cc794ab3efb27092f34;hp=3D0c02a4e3d23c7b5d03215f1bfaba9f70ed1= 1e9b7 I don't get what you mean. Could you explain a little bit more? Regards, Angel Tsankov