From: Takashi Iwai <tiwai@suse.de>
To: Thierry Reding <thierry.reding@gmail.com>
Cc: alsa-devel@alsa-project.org
Subject: Re: [PATCH] ALSA: hda - Make full_reset boolean
Date: Wed, 09 Apr 2014 14:49:05 +0200 [thread overview]
Message-ID: <s5h1tx6vfb2.wl%tiwai@suse.de> (raw)
In-Reply-To: <1397039457-9461-1-git-send-email-thierry.reding@gmail.com>
At Wed, 9 Apr 2014 12:30:57 +0200,
Thierry Reding wrote:
>
> From: Thierry Reding <treding@nvidia.com>
>
> The full_reset argument to azx_init_chip() carries boolean rather than
> numerical information, so update the type to reflect that.
>
> Signed-off-by: Thierry Reding <treding@nvidia.com>
> ---
> Changes in v2:
> - update prototype in hda_controller.h
Thanks, applied.
Takashi
>
> sound/pci/hda/hda_controller.c | 8 ++++----
> sound/pci/hda/hda_controller.h | 2 +-
> sound/pci/hda/hda_intel.c | 4 ++--
> 3 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c
> index 97993e17f46a..98d31d153703 100644
> --- a/sound/pci/hda/hda_controller.c
> +++ b/sound/pci/hda/hda_controller.c
> @@ -1604,7 +1604,7 @@ static void azx_exit_link_reset(struct azx *chip)
> }
>
> /* reset codec link */
> -static int azx_reset(struct azx *chip, int full_reset)
> +static int azx_reset(struct azx *chip, bool full_reset)
> {
> if (!full_reset)
> goto __skip;
> @@ -1701,7 +1701,7 @@ static void azx_int_clear(struct azx *chip)
> /*
> * reset and start the controller registers
> */
> -void azx_init_chip(struct azx *chip, int full_reset)
> +void azx_init_chip(struct azx *chip, bool full_reset)
> {
> if (chip->initialized)
> return;
> @@ -1841,7 +1841,7 @@ static void azx_bus_reset(struct hda_bus *bus)
>
> bus->in_reset = 1;
> azx_stop_chip(chip);
> - azx_init_chip(chip, 1);
> + azx_init_chip(chip, true);
> #ifdef CONFIG_PM
> if (chip->initialized) {
> struct azx_pcm *p;
> @@ -1948,7 +1948,7 @@ int azx_codec_create(struct azx *chip, const char *model,
> * get back to the sanity state.
> */
> azx_stop_chip(chip);
> - azx_init_chip(chip, 1);
> + azx_init_chip(chip, true);
> }
> }
> }
> diff --git a/sound/pci/hda/hda_controller.h b/sound/pci/hda/hda_controller.h
> index 1d2e3be2bae6..baf0e77330af 100644
> --- a/sound/pci/hda/hda_controller.h
> +++ b/sound/pci/hda/hda_controller.h
> @@ -37,7 +37,7 @@ int azx_alloc_stream_pages(struct azx *chip);
> void azx_free_stream_pages(struct azx *chip);
>
> /* Low level azx interface */
> -void azx_init_chip(struct azx *chip, int full_reset);
> +void azx_init_chip(struct azx *chip, bool full_reset);
> void azx_stop_chip(struct azx *chip);
> void azx_enter_link_reset(struct azx *chip);
> irqreturn_t azx_interrupt(int irq, void *dev_id);
> diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
> index 77ca894f8284..d6bca62ef387 100644
> --- a/sound/pci/hda/hda_intel.c
> +++ b/sound/pci/hda/hda_intel.c
> @@ -636,7 +636,7 @@ static int azx_resume(struct device *dev)
> return -EIO;
> azx_init_pci(chip);
>
> - azx_init_chip(chip, 1);
> + azx_init_chip(chip, true);
>
> snd_hda_resume(chip->bus);
> snd_power_change_state(card, SNDRV_CTL_POWER_D0);
> @@ -689,7 +689,7 @@ static int azx_runtime_resume(struct device *dev)
> status = azx_readw(chip, STATESTS);
>
> azx_init_pci(chip);
> - azx_init_chip(chip, 1);
> + azx_init_chip(chip, true);
>
> bus = chip->bus;
> if (status && bus) {
> --
> 1.9.1
>
next prev parent reply other threads:[~2014-04-09 12:49 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-09 10:30 [PATCH] ALSA: hda - Make full_reset boolean Thierry Reding
2014-04-09 12:49 ` Takashi Iwai [this message]
-- strict thread matches above, loose matches on Subject: below --
2014-04-09 9:28 Thierry Reding
2014-04-09 9:42 ` Takashi Iwai
2014-04-09 10:33 ` Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5h1tx6vfb2.wl%tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox