From mboxrd@z Thu Jan  1 00:00:00 1970
From: Takashi Iwai <tiwai@suse.de>
Subject: Re: Regression 2.6.35-rc6: ALSA Intel HDA/Realtek:
	missing	Beep
Date: Thu, 29 Jul 2010 10:52:36 +0200
Message-ID: <s5h39v2acvf.wl%tiwai@suse.de>
References: <20100728144903.GA18170@darkside.kls.lan>
	<s5hzkxbtya9.wl%tiwai@suse.de> <s5htynjtwz2.wl%tiwai@suse.de>
	<20100728212745.GA15394@darkside.kls.lan>
	<s5hd3u6alkp.wl%tiwai@suse.de>
	<20100729080930.GA20619@darkside.kls.lan>
	<s5h7hkeae35.wl%tiwai@suse.de>
	<20100729084138.GA15456@darkside.kls.lan>
Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka")
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
Return-path: <alsa-devel-bounces@alsa-project.org>
Received: from mx1.suse.de (cantor.suse.de [195.135.220.2])
	by alsa0.perex.cz (Postfix) with ESMTP id 8B17E1037F1
	for <alsa-devel@alsa-project.org>;
	Thu, 29 Jul 2010 10:52:36 +0200 (CEST)
In-Reply-To: <20100729084138.GA15456@darkside.kls.lan>
List-Unsubscribe: <http://mailman.alsa-project.org/mailman/listinfo/alsa-devel>,
	<mailto:alsa-devel-request@alsa-project.org?subject=unsubscribe>
List-Archive: <http://mailman.alsa-project.org/pipermail/alsa-devel>
List-Post: <mailto:alsa-devel@alsa-project.org>
List-Help: <mailto:alsa-devel-request@alsa-project.org?subject=help>
List-Subscribe: <http://mailman.alsa-project.org/mailman/listinfo/alsa-devel>,
	<mailto:alsa-devel-request@alsa-project.org?subject=subscribe>
Sender: alsa-devel-bounces@alsa-project.org
Errors-To: alsa-devel-bounces@alsa-project.org
To: Mario 'BitKoenig' Holbe <Mario.Holbe@TU-Ilmenau.DE>
Cc: alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org
List-Id: alsa-devel@alsa-project.org

At Thu, 29 Jul 2010 10:41:38 +0200,
Mario 'BitKoenig' Holbe wrote:
> 
> On Thu, Jul 29, 2010 at 10:26:22AM +0200, Takashi Iwai wrote:
> > FYI, you can change SSID by writing /sys/class/sound/hwC*D*/subsystem_id
> > file.  Then reconfigure the codec via triggering
> > /sys/class/sound/hwC*D*/reconfig.
> 
> Great, that's what I meant with "Or am I somehow able to tweak it? Is
> there a module parameter to set this SSID bit?" :)
> 
> $ for i in /sys/class/sound/hwC*D*/subsystem_id; do echo "$i: $(cat $i)"; done   
> /sys/class/sound/hwC0D0/subsystem_id: 0x1043829f
> /sys/class/sound/hwC0D1/subsystem_id: 0xffffffff
> 
> So, obviously the first check in
> 	if (ass != codec->bus->pci->subsystem_device && (ass & 1))
> is false. How can I tweak the subsystem_id least-invasive not to match
> codec->bus->pci->subsystem_device (which should be 0x829f then) anymore?

Usually the codec SSID isn't checked in other places, so passing a
bogus value should be OK.  Pass a value like 2:

	# echo -n 2 > /sys/class/sound/hwC0D0/subsystem_id
then
	# echo -n 1 > /sys/class/sound/hwC0D0/reconfig

The latter needs that the all sound device files are closed beforehand.


Takashi