From: Takashi Iwai <tiwai@suse.de>
To: Stephen Warren <swarren@nvidia.com>
Cc: wni@nvidia.com, wfg@linux.intel.com, ndaga@nvidia.com,
alsa-devel@alsa-project.org
Subject: Re: [PATCH 0/6] HDMI: Implement pcm-per-pin
Date: Fri, 03 Jun 2011 18:11:40 +0200 [thread overview]
Message-ID: <s5h4o463ner.wl%tiwai@suse.de> (raw)
In-Reply-To: <1306948461-2402-1-git-send-email-swarren@nvidia.com>
At Wed, 1 Jun 2011 11:14:15 -0600,
Stephen Warren wrote:
>
> This patchset implements a PCM-per-pin-widget model for all HDMI codecs that
> use the generic codec support. For most existing codecs, there is 1 pin and
> 1 converter per codec, so this change should have no functional impact. For
> some codecs (e.g. GeForce 520, Intel Ibex Peak) there are fewer converters
> than pins, and the default routing is for all pins to be mux'd from a single
> codec, so this patch allows:
>
> a) Multiple PCMs to be used at once (1 per converter). Previously, only 1
> PCM was created due to the default muxing.
>
> b) A direct mapping from PCM device to pin, and hence to ELD data and
> connected monitor. This should enable simpler/better decisions re: which
> audio formats are supported for that PCM, since only 1 ELD has to be
> considered (previously, I think the ELDs other than from the first pin
> were simply ignored)
>
> The very first change in the series is actually somewhat unrelated, but I
> noticed it while working on this, and I believe it's a correct change.
Thanks for the patches. Through a quick glance, all look OK to me.
I'm going to try to review more and apply the patches in the next week.
Takashi
>
> Stephen Warren (6):
> ALSA: hda: Gate ELD usage only by whether ELD is valid
> ALSA: hda: Allow multple SPDIF controls per codec
> ALSA: hda: Virtualize SPDIF out controls
> ALSA: hda: Separate generic and non-generic implementations
> ALSA: hda: hdmi_eld_update_pcm_info: update a stream in place
> ALSA: hda: HDMI: Support codecs with fewer cvts than pins
>
> sound/pci/hda/hda_codec.c | 139 ++++++---
> sound/pci/hda/hda_codec.h | 16 +-
> sound/pci/hda/hda_eld.c | 46 ++--
> sound/pci/hda/hda_intel.c | 5 +-
> sound/pci/hda/hda_local.h | 8 +-
> sound/pci/hda/patch_analog.c | 4 +-
> sound/pci/hda/patch_ca0110.c | 3 +-
> sound/pci/hda/patch_cirrus.c | 3 +-
> sound/pci/hda/patch_cmedia.c | 4 +-
> sound/pci/hda/patch_conexant.c | 1 +
> sound/pci/hda/patch_hdmi.c | 704 ++++++++++++++++++++++++----------------
> sound/pci/hda/patch_realtek.c | 1 +
> sound/pci/hda/patch_sigmatel.c | 4 +-
> sound/pci/hda/patch_via.c | 13 +-
> 14 files changed, 594 insertions(+), 357 deletions(-)
>
next prev parent reply other threads:[~2011-06-03 16:11 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-01 17:14 [PATCH 0/6] HDMI: Implement pcm-per-pin Stephen Warren
2011-06-01 17:14 ` [PATCH 1/6] ALSA: hda: Gate ELD usage only by whether ELD is valid Stephen Warren
2011-06-01 17:14 ` [PATCH 2/6] ALSA: hda: Allow multple SPDIF controls per codec Stephen Warren
2011-06-01 17:14 ` [PATCH 3/6] ALSA: hda: Virtualize SPDIF out controls Stephen Warren
2011-06-01 17:14 ` [PATCH 4/6] ALSA: hda: Separate generic and non-generic implementations Stephen Warren
2011-06-01 17:14 ` [PATCH 5/6] ALSA: hda: hdmi_eld_update_pcm_info: update a stream in place Stephen Warren
2011-06-01 17:14 ` [PATCH 6/6] ALSA: hda: HDMI: Support codecs with fewer cvts than pins Stephen Warren
2011-06-03 16:11 ` Takashi Iwai [this message]
2011-06-06 14:21 ` [PATCH 0/6] HDMI: Implement pcm-per-pin Takashi Iwai
2011-06-08 0:06 ` [PATCH 1/1] Added patch file and Makefile entry for CA0132 HDA codec Ian Minett
2011-06-08 6:04 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5h4o463ner.wl%tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=ndaga@nvidia.com \
--cc=swarren@nvidia.com \
--cc=wfg@linux.intel.com \
--cc=wni@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox