From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: Acer Aspire 8920g / snd-hda-intel / ALC889 Date: Tue, 22 Apr 2008 12:34:54 +0200 Message-ID: References: <480C8260.70501@warmcat.com> <480CDC26.3010506@warmcat.com> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (mx2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id 329A82458D for ; Tue, 22 Apr 2008 12:34:57 +0200 (CEST) In-Reply-To: <480CDC26.3010506@warmcat.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Andy Green Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org At Mon, 21 Apr 2008 19:25:42 +0100, Andy Green wrote: > > Somebody in the thread at some point said: > > >> and dmesg says that model=acer was selected reasonably enough. > > > > First of all, do you need to pass model=acer at all? > > No, the auto thing detects it as acer and reports in dmesg that it has > selected acer. Currently I forced it anyway in /etc/modprobe.conf to > acer as part of running around trying everything I could imagine. I guess the correct model is rather acer-aspire. Try it instead. > >> 1) It is confused if it has ALC889 or ALC883 in there > >> > >> $ grep ALC /proc/asound/* -R > >> /proc/asound/card0/codec#0:Codec: Realtek ALC889 <==== 889 > >> /proc/asound/card0/pcm2c/sub0/info:id: ALC883 Analog <=== 883... > > > > This doesn't matter. ALC889 is compatible with ALC883, and the driver > > uses the same string inside. > > OK. > > > alsa-info.sh (found in www.alsa-project.org debug page) would give > > more detailed debug information. Please show that output. > > It is here: > > http://pastebin.ca/992253 The setting looks OK otherwise. BTW, it'd be better to show the contents in the post at the next time. thanks, Takashi