Re: ice1724: from 1.0.4 to 1.0.5a upgrading problem

[Takashi Iwai <tiwai@suse.de>]

At Wed, 14 Jul 2004 17:18:03 +0400,
Andrew Gaydenko wrote:
> 
> Hi,
> 
> After upgrading the driver from 1.0.4 to 1.0.5a I'm not able to start jack server
> with 96000 rate for alsa driver. I use hw:0,1 device which is digital out in my
> Terratek  Aureon Space 7.1. Instead of 96000, jack server starts with 48000. For
> hw:0,0 the problem doesn't take place. Can anybody point me further direction to
> resolve the problem?

The digital out doesn't support 96kHz (yet)...


> P.S. BTW, 1.0.5a driver has few new mixer controls. What are meaning of
>      these controls: 'ADC Oversampling' and 'DAC Deemphasis Switch'?

The former defines the oversampling range, either 128 or 64 times.
The latter is a toggle switch to turn on/off deemphasis (I forgot the
frequency...)  You can turn if off unless you need something special.


Takashi


-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - 
digital self defense, top technical experts, no vendor pitches, 
unmatched networking opportunities. Visit www.blackhat.com