Re: [PATCH] conf/ucm: broadwell-rt286: change to set capture volume and capture device

[Takashi Iwai <tiwai@suse.de>]

At Fri,  8 May 2015 15:18:47 +0800,
Jie Yang wrote:
> 
> Set 'Mic Capture Volume' in capture device EnableSequence, to fix
> capture no volume by default issue.
> 
> Also add JackHWMute Value item to mute onboard dmic while headset
> mic is plugged in.
> 
> Signed-off-by: Jie Yang <yang.jie@intel.com>

Applied, thanks.


Takashi

> ---
>  src/conf/ucm/broadwell-rt286/HiFi | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/src/conf/ucm/broadwell-rt286/HiFi b/src/conf/ucm/broadwell-rt286/HiFi
> index 58983ea..c09a01c 100644
> --- a/src/conf/ucm/broadwell-rt286/HiFi
> +++ b/src/conf/ucm/broadwell-rt286/HiFi
> @@ -86,6 +86,7 @@ SectionDevice."Handset" {
>  	EnableSequence [
>  		cdev "hw:broadwellrt286"
>  
> +		cset "name='Mic Capture Volume' 28"
>  		cset "name='ADC 0 Mux' 0"
>  		cset "name='ADC0 Capture Switch' on"
>  		cset "name='ADC0 Capture Volume' 127"
> @@ -99,6 +100,9 @@ SectionDevice."Handset" {
>  
>  	Value {
>  		CaptureChannels "2"
> +		JackDev "rt286-jack"
> +		JackControl "Mic Jack"
> +		JackHWMute "Mainmic"
>  	}
>  }
>  
> @@ -112,6 +116,7 @@ SectionDevice."Mainmic" {
>  	EnableSequence [
>  		cdev "hw:broadwellrt286"
>  
> +		cset "name='Mic Capture Volume' 30"
>  		cset "name='ADC 0 Mux' 2"
>  		cset "name='ADC0 Capture Switch' on"
>  		cset "name='ADC0 Capture Volume' 127"
> -- 
> 1.9.1
>