Re: snd-opti92x-ad1848 problems

[Takashi Iwai <tiwai@suse.de>]

At Thu, 20 Mar 2003 10:52:18 +0200,
Andrei Boros wrote:
> 
> 
>  I finally got the modules to compile and work. make-3.79 gave me a
> headache to install last night, but I got it in. 
> 
>  I built the snd-opti92x-ad848 module and attempted to use it:
> 
> isapnp configures the card as : 
> gate:/lib/modules/2.2.24/misc# isapnp /etc/isapnp.conf
> Board 1 has Identity 1f 08 00 00 00 24 09 14 3e:  OPT0924 Serial No
> 134217728 [checksum 1f]
> OPT0924/134217728[0]{Pro Audio 16        }: Ports 0x220 0x130 0x380;
> IRQ7 DMA0 DMA1 --- Enabled OK
> OPT0924/134217728[1]{Game Port           }: Port 0x201; --- Enabled OK
> OPT0924/134217728[2]{MPU401              }: Port 0x300; IRQ5 --- Enabled
> OK
> /etc/isapnp.conf:263 -- Warning - resource conflict allocating IRQ5 (see
> /etc/isapnp.conf)
> OPT0924/134217728[5]{OPT924              }: Port 0x30D; IRQ5 --- Enabled
> OK
> 
> (with or without MPU401 enabled and that shared IRQ is the same. anyway,
> I got no more spare irqs...)
> 
> a modprobe snd-opti92x-ad1848 gives Device or resource busy.

please don't mix isapnp-tools and alsa modules.
alsa modules support the isapnp stuff natively.


Takashi


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf