Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Mario 'BitKoenig' Holbe <Mario.Holbe@TU-Ilmenau.DE>
Cc: alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org
Subject: Re: Regression 2.6.35-rc6: ALSA Intel HDA/Realtek: missing	Beep
Date: Thu, 29 Jul 2010 07:44:38 +0200	[thread overview]
Message-ID: <s5hd3u6alkp.wl%tiwai@suse.de> (raw)
In-Reply-To: <20100728212745.GA15394@darkside.kls.lan>

At Wed, 28 Jul 2010 23:27:46 +0200,
Mario 'BitKoenig' Holbe wrote:
> 
> [1  <text/plain; us-ascii (quoted-printable)>]
> On Wed, Jul 28, 2010 at 06:03:29PM +0200, Takashi Iwai wrote:
> > I wrote:
> > > Mario 'BitKoenig' Holbe wrote:
> > > > My PC-Speaker Beep control worked in 2.6.34, but is gone in 2.6.35-rc6.
> > > It's because now the driver checks the SSID your board sets up.
> > > So, it's actually BIOS that clears it.
> 
> But the BIOS itself beeps through the sound-card at boot :/

But BIOS tells that the HD-audio codec shouldn't use, so the driver
follows it.

> > Or, does the following patch fix?  It's already in sound git tree,
> 
> Nope, unfortunately it doesn't. Still no Beep controls, no beep through
> sound-card.
> 
> May I somehow provide any further data?

Please give alsa-info.sh output instead of codec proc file.  It's more
comprehensive.

> Or am I somehow able to tweak it? Is there a module parameter to set
> this SSID bit? I mean, it did work before... :)

With the patch below, you'll likely have back the system beep sound.
But it doesn't go through codec, thus no volume control.


thanks,

Takashi

---
>From 8af2591d6342a9e4bb79b4f1236246a79d20ebee Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Wed, 28 Jul 2010 17:37:16 +0200
Subject: [PATCH] ALSA: hda - Don't register beep input device when no beep is available

We check now the availability of PC beep and skip the build of beep
mixers, but the driver still registers the input device.  This should
be checked as well.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c |   32 +++++++++++++++++++-------------
 1 files changed, 19 insertions(+), 13 deletions(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index ff614dd..d7fd846 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -10566,10 +10566,12 @@ static int patch_alc882(struct hda_codec *codec)
 		}
 	}
 
-	err = snd_hda_attach_beep_device(codec, 0x1);
-	if (err < 0) {
-		alc_free(codec);
-		return err;
+	if (spec->cdefine.enable_pcbeep) {
+		err = snd_hda_attach_beep_device(codec, 0x1);
+		if (err < 0) {
+			alc_free(codec);
+			return err;
+		}
 	}
 
 	if (board_config != ALC882_AUTO)
@@ -12435,7 +12437,7 @@ static int patch_alc262(struct hda_codec *codec)
 		}
 	}
 
-	if (!spec->no_analog) {
+	if (!spec->no_analog && spec->cdefine.enable_pcbeep) {
 		err = snd_hda_attach_beep_device(codec, 0x1);
 		if (err < 0) {
 			alc_free(codec);
@@ -14458,10 +14460,12 @@ static int patch_alc269(struct hda_codec *codec)
 		}
 	}
 
-	err = snd_hda_attach_beep_device(codec, 0x1);
-	if (err < 0) {
-		alc_free(codec);
-		return err;
+	if (spec->cdefine.enable_pcbeep) {
+		err = snd_hda_attach_beep_device(codec, 0x1);
+		if (err < 0) {
+			alc_free(codec);
+			return err;
+		}
 	}
 
 	if (board_config != ALC269_AUTO)
@@ -18691,10 +18695,12 @@ static int patch_alc662(struct hda_codec *codec)
 		}
 	}
 
-	err = snd_hda_attach_beep_device(codec, 0x1);
-	if (err < 0) {
-		alc_free(codec);
-		return err;
+	if (spec->cdefine.enable_pcbeep) {
+		err = snd_hda_attach_beep_device(codec, 0x1);
+		if (err < 0) {
+			alc_free(codec);
+			return err;
+		}
 	}
 
 	if (board_config != ALC662_AUTO)
-- 
1.7.2

  reply	other threads:[~2010-07-29  5:44 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-07-28 14:49 Regression 2.6.35-rc6: ALSA Intel HDA/Realtek: missing Beep Mario 'BitKoenig' Holbe
2010-07-28 15:35 ` Takashi Iwai
2010-07-28 16:03   ` [alsa-devel] " Takashi Iwai
2010-07-28 21:27     ` Mario 'BitKoenig' Holbe
2010-07-29  5:44       ` Takashi Iwai [this message]
2010-07-29  8:09         ` [alsa-devel] " Mario 'BitKoenig' Holbe
2010-07-29  8:26           ` Takashi Iwai
2010-07-29  8:41             ` Mario 'BitKoenig' Holbe
2010-07-29  8:52               ` Takashi Iwai
2010-07-29  9:15                 ` Mario 'BitKoenig' Holbe
2010-07-29  9:42                   ` Takashi Iwai
2010-07-29 13:25                     ` Mario 'BitKoenig' Holbe
2010-07-29 13:33                       ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5hd3u6alkp.wl%tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=Mario.Holbe@TU-Ilmenau.DE \
    --cc=alsa-devel@alsa-project.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox