Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Cc: alsa-devel@alsa-project.org
Subject: Re: [PATCH 2/2] ALSA: hda/cs8409: Prevent pops and clicks during reboot
Date: Thu, 26 Aug 2021 17:29:25 +0200	[thread overview]
Message-ID: <s5heeagusve.wl-tiwai@suse.de> (raw)
In-Reply-To: <3c2cee1d-8147-9521-99ba-6a8ade422529@opensource.cirrus.com>

On Thu, 26 Aug 2021 17:14:31 +0200,
Vitaly Rodionov wrote:
> 
> On 26/08/2021 2:00 pm, Vitaly Rodionov wrote:
> > On 26/08/2021 1:20 pm, Takashi Iwai wrote:
> >> On Thu, 26 Aug 2021 13:49:32 +0200,
> >> Vitaly Rodionov wrote:
> >>> On 26/08/2021 11:49 am, Takashi Iwai wrote:
> >>>> On Thu, 26 Aug 2021 08:03:45 +0200,
> >>>> Takashi Iwai wrote:
> >>>>> On Wed, 25 Aug 2021 20:04:05 +0200,
> >>>>> Vitaly Rodionov wrote:
> >>>>>> Actually when codec is suspended and we do reboot from UI, then
> >>>>>> sometimes we
> >>>>>> see suspend() calls in kernel log and no pops, but sometimes
> >>>>>>
> >>>>>> we still have no suspend() on reboot and we hear pops. But when
> >>>>>> we do reboot
> >>>>>> from command line: > sudo reboot  then we always have pops and
> >>>>>> no suspend()
> >>>>>> called.
> >>>>>>
> >>>>>> Then we have added extra logging and we can see that on reboot
> >>>>>> codec somehow
> >>>>>> getting resume() call and we run jack detect on resume that
> >>>>>> causing pops.
> >>>>> Hm, it's interesting who triggers the runtime resume.
> >>>>>
> >>>>>> We were thinking about possible solution for that and we would
> >>>>>> propose some
> >>>>>> changes in generic code hda_bind.c:
> >>>>>>
> >>>>>> static void hda_codec_driver_shutdown(struct device *dev) { +  
> >>>>>> if (codec->
> >>>>>> patch_ops.suspend) + codec->patch_ops.suspend(codec);
> >>>>>> snd_hda_codec_shutdown(dev_to_hda_codec(dev)); +
> >>>>>> hda_codec_driver_remove
> >>>>>> (dev_to_hda_codec(dev)); }
> >>>>> Sorry, it's no-no.  The suspend can't be called unconditionally, and
> >>>>> the driver unbind must not be called in the callback itself.
> >>>>>
> >>>>> Does the patch below work instead?
> >>>> Sorry there was a typo.  A bit more revised patch is below.
> >>>>
> >>>>
> >>>> Takashi
> >>>>
> >>>> --- a/sound/pci/hda/hda_intel.c
> >>>> +++ b/sound/pci/hda/hda_intel.c
> >>>> @@ -1383,14 +1383,17 @@ static void azx_free(struct azx *chip)
> >>>>        hda->freed = 1;
> >>>>    }
> >>>>    -static int azx_dev_disconnect(struct snd_device *device)
> >>>> +static void __azx_disconnect(struct azx *chip)
> >>>>    {
> >>>> -    struct azx *chip = device->device_data;
> >>>>        struct hdac_bus *bus = azx_bus(chip);
> >>>>          chip->bus.shutdown = 1;
> >>>>        cancel_work_sync(&bus->unsol_work);
> >>>> +}
> >>>>    +static int azx_dev_disconnect(struct snd_device *device)
> >>>> +{
> >>>> +    __azx_disconnect(device->device_data);
> >>>>        return 0;
> >>>>    }
> >>>>    @@ -2356,8 +2359,10 @@ static void azx_shutdown(struct pci_dev
> >>>> *pci)
> >>>>        if (!card)
> >>>>            return;
> >>>>        chip = card->private_data;
> >>>> -    if (chip && chip->running)
> >>>> +    if (chip && chip->running) {
> >>>> +        __azx_disconnect(chip);
> >>>>            azx_shutdown_chip(chip);
> >>>> +    }
> >>>>    }
> >>>>      /* PCI IDs */
> >>> Hi Takashi,
> >>>
> >>> Applied fix and tested on dolphin HW. Issue still there, here is
> >>> captured screen on reboot from command line:
> >>>
> >>> reboot capture
> >>>
> >>> Reboot from UI works differently, no resume() call in this case.
> >> Thanks for quick testing.
> >>
> >> After reconsideration, I believe we can even take a simpler path.
> >> Use pm_runtime_force_suspend(), and keep suspended by
> >> pm_runtime_disable() call afterwards.
> >>
> >> Below is another test patch.  Could you check whether this works
> >> better?
> >>
> >>
> >> Takashi
> >>
> >> --- a/sound/pci/hda/hda_codec.c
> >> +++ b/sound/pci/hda/hda_codec.c
> >> @@ -2986,13 +2986,11 @@ void snd_hda_codec_shutdown(struct
> >> hda_codec *codec)
> >>   {
> >>       struct hda_pcm *cpcm;
> >>   -    if (pm_runtime_suspended(hda_codec_dev(codec)))
> >> -        return;
> >> -
> >>       list_for_each_entry(cpcm, &codec->pcm_list_head, list)
> >>           snd_pcm_suspend_all(cpcm->pcm);
> >>   -    pm_runtime_suspend(hda_codec_dev(codec));
> >> +    pm_runtime_force_suspend(hda_codec_dev(codec));
> >> +    pm_runtime_disable(hda_codec_dev(codec));
> >>   }
> >>     /*
> >
> > Hi Takashi,
> >
> > Thank you very much! Yes, that works fine.  suspend() has been
> > called on reboot and no pops.
> >
> > I still have previous patch in the code, so let me remove it and
> > test it again with only snd_hda_codec_shutdown() changes.
> >
> > Thanks,
> >
> > Vitaly
> >
> >
> Hi Takashi,
> 
> I have finished regression tests on all our platforms and results are
> positive, latest patch has fixed an issue with pops on reboot and no
> 
> regression on other platforms as well.

Great, thanks for testing again!
I'll submit and merge the patch with your reported-and-tested-by tag.


Takashi

  reply	other threads:[~2021-08-26 15:30 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-12 18:34 [PATCH 1/2] ALSA: hda/cs8409: Prevent pops and clicks during suspend Vitaly Rodionov
2021-08-12 18:34 ` [PATCH 2/2] ALSA: hda/cs8409: Prevent pops and clicks during reboot Vitaly Rodionov
2021-08-13  6:10   ` Takashi Iwai
2021-08-14  6:41     ` Takashi Iwai
2021-08-17 11:28       ` Vitaly Rodionov
2021-08-17 12:16         ` Takashi Iwai
2021-08-25 18:04           ` Vitaly Rodionov
2021-08-26  6:03             ` Takashi Iwai
2021-08-26 10:49               ` Takashi Iwai
2021-08-26 10:56                 ` Vitaly Rodionov
     [not found]                 ` <9a3c2f9e-e2a5-702f-bd3f-7348097a0500@opensource.cirrus.com>
2021-08-26 12:20                   ` Takashi Iwai
2021-08-26 13:00                     ` Vitaly Rodionov
2021-08-26 15:14                       ` Vitaly Rodionov
2021-08-26 15:29                         ` Takashi Iwai [this message]
2021-08-13  6:08 ` [PATCH 1/2] ALSA: hda/cs8409: Prevent pops and clicks during suspend Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5heeagusve.wl-tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=vitalyr@opensource.cirrus.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox