Re: [alsa-devel] Headphone output doesn't work with 3.0.0-rc* anymore

[Takashi Iwai <tiwai@suse.de>]

At Thu, 9 Jun 2011 11:06:07 +0200,
Michal Hocko wrote:
> 
> On Thu 09-06-11 10:56:16, Michal Hocko wrote:
> > On Thu 09-06-11 08:09:18, Takashi Iwai wrote:
> > > At Wed, 8 Jun 2011 19:48:55 +0200,
> [...]
> > > Thanks, that's helpful.
> > > As a quirk solution, could you try to pass model=auto option to
> > > snd-hda-intel module?
> > 
> > Headphones work now but speakers are quite... I have tried to play
> > with Headphone and Speaker controls in alsamixer but no changes.
> > 
> > Here is what I get in logs when the module is loaded:
> > [ 5320.360277] HDA Intel 0000:00:1b.0: PCI INT A disabled
> > [ 5326.920247] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
> > [ 5326.920262] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
> > [ 5326.920279] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> > [ 5326.920375] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
> > [ 5326.920405] HDA Intel 0000:00:1b.0: setting latency timer to 64
> > [ 5326.981085] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
> > [ 5326.981262] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
> > [ 5326.987934] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
> > 
> > [maybe not important but input numbers are increasing for every new load]
> > 
> > There is another strange thing. After I stop mplayer and wait for some
> > time (~1min) I can hear a "click" sound and then there is no sound at
> > all... If I start mplayer in the meantime it just works...
> > If I try to remove the module and load it again then things work and stop
> > working after first playback again.
> 
> And I have just found out that I do not have to start any playback to
> see this. It is sufficient to load the module and wait a minute and
> there is no sound at all (both from speakers or headphones).

OK, could you give alsa-info.sh outputs at both working and
non-working states?


thanks,

Takashi