Re: Terratec DMX (Newbie)

[Takashi Iwai <tiwai@suse.de>]

Hi,

At Mon, 25 Feb 2002 13:33:05 +1100,
Chris Wenn wrote:
> 
> Hey there.
> 
> Soory about the cross-posting, but I'm hoping someone can give me a 
> couple of pointers. I have a Terratec SoundSystem DMX (that's a Maestro 
> 2E card) which I can't get fired up using either alsaconf or by hand 
> (I'm running the debian packages of alsa 0.9.0beta10) When I configure 
> the card in alsaconf, I get through the first part ok (though I'm 
> guessing at the values for configuration), until it's time to load up 
> the mixer progs, at which point it crashes out saying:
> 
> # Loading driver:
> # Starting ALSA sound driver (version 0.9.0beta10): no sound cards
> # defined.
> # Setting the PCM volume to 100% and the Master output volume tp 50%
> # amixer: Mixer attach default error: No such file or directory
> # Could not initialize the mixer, the card was probably not detected
> # correctly.
> 
> If I do the configuration by hand in /etc/modules.conf, I get an error 
> saying that 'parm_snd_pcm_channels_p' and 'parm_snd_pcm_channels_c' do 
> not exist (sorry, I don't have the exact output to hand)
 
these module parameters are obsolete on 0.9.0 (they are for 0.5.x
drivers).  sorry if you referred to INSTALL in alsa-driver.  the
document was wrong.  now it's fixed.


> If someone could mail me the correct values and a quick how-to on 
> getting the damn thing fired up, I'd much appreciate it.

please remove all module options from snd-es1968 (except for
snd_index).  it should work as default.

also, please make sure that the version of your alsa-utils / alsa-lib
is really 0.9.0.


HTH.

ciao,

Takashi

_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel