From: Takashi Iwai <tiwai@suse.de>
To: mengdong.lin@intel.com
Cc: alsa-devel@alsa-project.org
Subject: Re: [PATCH] ALSA: hda - delay resume haswell hdmi codec in system resume
Date: Fri, 05 Apr 2013 15:12:27 +0200 [thread overview]
Message-ID: <s5hhajl2kas.wl%tiwai@suse.de> (raw)
In-Reply-To: <1364321572-2634-1-git-send-email-mengdong.lin@intel.com>
At Tue, 26 Mar 2013 14:12:52 -0400,
mengdong.lin@intel.com wrote:
>
> From: Mengdong Lin <mengdong.lin@intel.com>
>
> In system resume, Haswell codec cannot be programmed to D0 before Gfx driver
> initializes the display pipeline and audio, which will trigger an unsol event
> on the pin with HDMI/DP cable connected. Otherwise, the connected pin will
> stay in D3 with right channel muted and thus no sound can be heard.
>
> This patch
> - adds a codec flag to delay resuming a codec. System resume will skip the
> codecs if this flag is set, and these codecs will be resumed on later codec
> access.
> - adds a set_power_state ops for Haswell HDMI codec. In a delayed resume, this
> ops will enable and wait for the unsol event, and then resume the codec. A
> 300ms timeout is set in case unsol event is lost.
>
> Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Some other comments:
- Please rebase your patch to for-next branch of sound git tree.
It can't be applied cleanly due to recent other changes.
- Fix some strange indentations and spaces (e.g. in
intel_haswell_set_power_state)
thanks,
Takashi
> diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
> index 04b5738..bcb7205 100644
> --- a/sound/pci/hda/hda_codec.c
> +++ b/sound/pci/hda/hda_codec.c
> @@ -5508,11 +5508,15 @@ int snd_hda_resume(struct hda_bus *bus)
> struct hda_codec *codec;
>
> list_for_each_entry(codec, &bus->codec_list, list) {
> - hda_call_codec_resume(codec);
> + if (codec->support_delay_resume)
> + codec->resume_delayed = 1;
> + else
> + hda_call_codec_resume(codec);
> }
> return 0;
> }
> EXPORT_SYMBOL_HDA(snd_hda_resume);
> +
> #endif /* CONFIG_PM */
>
> /*
> diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
> index 23ca172..5b5e5f4 100644
> --- a/sound/pci/hda/hda_codec.h
> +++ b/sound/pci/hda/hda_codec.h
> @@ -886,6 +886,8 @@ struct hda_codec {
> unsigned int d3_stop_clk:1; /* support D3 operation without BCLK */
> unsigned int pm_down_notified:1; /* PM notified to controller */
> unsigned int in_pm:1; /* suspend/resume being performed */
> + unsigned int support_delay_resume:1; /* codec support delay resume */
> + unsigned int resume_delayed:1; /* resume delayed by PM */
> int power_transition; /* power-state in transition */
> int power_count; /* current (global) power refcount */
> struct delayed_work power_work; /* delayed task for powerdown */
> diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
> index 78e1827..d116908 100644
> --- a/sound/pci/hda/patch_hdmi.c
> +++ b/sound/pci/hda/patch_hdmi.c
> @@ -98,6 +98,14 @@ struct hdmi_spec {
> */
> struct hda_multi_out multiout;
> struct hda_pcm_stream pcm_playback;
> +
> +#ifdef CONFIG_PM
> + /*
> + * Non-generic Intel Haswell specific
> + */
> + unsigned int ready_to_resume:1;
> + wait_queue_head_t resume_wq;
> +#endif
> };
>
>
> @@ -977,6 +985,13 @@ static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res)
> if (pin_idx < 0)
> return;
>
> +#ifdef CONFIG_PM
> + if (codec->resume_delayed) {
> + spec->ready_to_resume = 1;
> + wake_up(&spec->resume_wq);
> + }
> +#endif
> +
> hdmi_present_sense(&spec->pins[pin_idx], 1);
> snd_hda_jack_report_sync(codec);
> }
> @@ -1846,6 +1861,63 @@ static const struct hda_fixup hdmi_fixups[] = {
> };
>
>
> +#ifdef CONFIG_PM
> +static void intel_haswell_wait_ready_to_resume(struct hda_codec *codec)
> +{
> + struct hdmi_spec *spec = codec->spec;
> + int pin_idx;
> +
> + spec->ready_to_resume = 0;
> +
> + for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
> + struct hdmi_spec_per_pin *per_pin;
> + hda_nid_t pin_nid;
> + struct hda_jack_tbl *jack;
> +
> + per_pin = &spec->pins[pin_idx];
> + pin_nid = per_pin->pin_nid;
> + jack = snd_hda_jack_tbl_get(codec, pin_nid);
> + if (jack)
> + snd_hda_codec_write(codec, pin_nid, 0,
> + AC_VERB_SET_UNSOLICITED_ENABLE,
> + AC_USRSP_EN | jack->tag);
> + }
> +
> + wait_event_timeout(spec->resume_wq,
> + spec->ready_to_resume, msecs_to_jiffies(300));
> + if (!spec->ready_to_resume)
> + snd_printd(KERN_WARNING "HDMI: Haswell not ready to resume\n");
> +}
> +
> +static void intel_haswell_set_power_state(struct hda_codec *codec, hda_nid_t fg,
> + unsigned int power_state)
> +{
> + if (codec->resume_delayed && power_state == AC_PWRST_D0) {
> + intel_haswell_wait_ready_to_resume(codec);
> + codec->resume_delayed = 0;
> + }
> +
> + snd_hda_codec_read(codec, fg, 0,
> + AC_VERB_SET_POWER_STATE,
> + power_state);
> +
> + snd_hda_codec_set_power_to_all(codec, fg, power_state);
> +}
> +
> +static inline void intel_haswell_allow_delay_resume(struct hda_codec *codec)
> +{
> + struct hdmi_spec *spec = codec->spec;
> +
> + init_waitqueue_head(&spec->resume_wq);
> + codec->support_delay_resume = 1;
> +
> + codec->patch_ops.set_power_state =
> + intel_haswell_set_power_state;
> +}
> +#else
> +define intel_haswell_allow_delay_resume NULL
> +#endif
> +
> static int patch_generic_hdmi(struct hda_codec *codec)
> {
> struct hdmi_spec *spec;
> @@ -1868,6 +1940,10 @@ static int patch_generic_hdmi(struct hda_codec *codec)
> return -EINVAL;
> }
> codec->patch_ops = generic_hdmi_patch_ops;
> +
> + if (codec->vendor_id == 0x80862807)
> + intel_haswell_allow_delay_resume(codec);
> +
> generic_hdmi_init_per_pins(codec);
>
> init_channel_allocations();
> --
> 1.7.10.4
>
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>
prev parent reply other threads:[~2013-04-05 13:12 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-26 18:12 [PATCH] ALSA: hda - delay resume haswell hdmi codec in system resume mengdong.lin
2013-03-26 7:02 ` Lin, Mengdong
2013-04-02 9:53 ` Takashi Iwai
2013-04-05 16:58 ` Lin, Mengdong
2013-04-07 7:28 ` Takashi Iwai
2013-03-26 10:58 ` David Henningsson
2013-03-27 2:03 ` Lin, Mengdong
2013-03-27 8:19 ` David Henningsson
2013-03-27 10:01 ` Lin, Mengdong
2013-04-02 11:53 ` David Henningsson
2013-04-02 12:18 ` Takashi Iwai
2013-04-02 12:49 ` David Henningsson
2013-04-05 13:01 ` Takashi Iwai
2013-04-05 13:08 ` Takashi Iwai
2013-04-05 16:42 ` Lin, Mengdong
2013-04-05 17:04 ` Takashi Iwai
2013-04-07 0:10 ` Lin, Mengdong
2013-04-08 9:49 ` David Henningsson
2013-04-08 10:24 ` Takashi Iwai
2013-04-08 11:06 ` Lin, Mengdong
2013-04-08 11:35 ` David Henningsson
2013-04-08 11:59 ` Takashi Iwai
2013-04-08 12:20 ` David Henningsson
2013-04-08 12:23 ` Takashi Iwai
2013-04-08 13:30 ` David Henningsson
2013-04-08 13:49 ` Takashi Iwai
2013-04-08 15:47 ` Lin, Mengdong
2013-04-09 6:45 ` David Henningsson
2013-04-09 6:53 ` Takashi Iwai
2013-04-09 7:10 ` David Henningsson
2013-04-09 7:42 ` Takashi Iwai
2013-04-09 8:18 ` Lin, Mengdong
2013-04-09 9:15 ` David Henningsson
2013-04-09 9:26 ` Takashi Iwai
2013-04-10 5:29 ` David Henningsson
2013-04-10 5:47 ` Takashi Iwai
2013-04-10 6:02 ` David Henningsson
2013-04-10 6:52 ` Takashi Iwai
2013-04-10 10:38 ` David Henningsson
2013-04-14 13:48 ` Lin, Mengdong
2013-04-15 7:02 ` David Henningsson
2013-04-15 7:48 ` Lin, Mengdong
2013-04-17 5:51 ` David Henningsson
2013-04-17 6:12 ` Takashi Iwai
2013-05-03 6:56 ` Lin, Mengdong
2013-05-03 7:20 ` David Henningsson
2013-05-03 7:30 ` Lin, Mengdong
2013-05-06 6:27 ` Lin, Mengdong
2013-05-06 7:08 ` David Henningsson
2013-05-06 9:48 ` Lin, Mengdong
2013-04-05 13:06 ` Takashi Iwai
2013-04-05 13:12 ` Takashi Iwai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hhajl2kas.wl%tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=mengdong.lin@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox