From: Takashi Iwai <tiwai@suse.de>
To: Anisse Astier <anisse@astier.eu>
Cc: alsa-devel@alsa-project.org
Subject: Re: Mic Boost control problem with snd-hda-intel codec AL662 rev 1
Date: Tue, 12 Jan 2010 12:43:13 +0100 [thread overview]
Message-ID: <s5hhbqro8fi.wl%tiwai@suse.de> (raw)
In-Reply-To: <20100106164338.2f3764bf@destiny.ordissimo>
At Wed, 6 Jan 2010 16:43:38 +0100,
Anisse Astier wrote:
>
> Hi,
>
> The Mic Boost control on a laptop seems to behave incorrectly. The
> control has the flag "volume" instead of "cvolume", causing it to appear
> in both the "Playback" and "Capture" tabs of alsamixer.
> This wouldn't be a problem if it would just work in the Capture tab: it
> doesn't.
> When I modify it in Capture, it doesn't retain its value: it's gone after
> i close alsamixer. But if i modify it in "Playback" it will retain its
> value and the value will be mirrored by the Mic Boost in Capture (both
> Mic Boost seem to reflect the same control, except one is RO, the other
> is RW).
>
> It's a minor a annoyance, but I'd like to fix it and have "Mic Boost"
> appear only as a Capture control and retaining its value. Maybe I should
> create a new mixer configuration for this hardware in patch_realtek.c, but
> I don't know where to start. Bios autoprobing works for everything but
> just what I mentioned.
Well, Mic Boost is applied to both playback and capture in case you
have analog loopback. So, it's not entirely wrong.
The problem is rather the inconsistent behavior in alsamixer.
I guess it's a bug of old alsa-lib. Try to upgrade the alsa-lib and
alsa-utils first.
Takashi
next prev parent reply other threads:[~2010-01-12 11:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-06 15:43 Mic Boost control problem with snd-hda-intel codec AL662 rev 1 Anisse Astier
2010-01-12 11:43 ` Takashi Iwai [this message]
2010-01-13 17:45 ` Anisse Astier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hhbqro8fi.wl%tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=anisse@astier.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox