Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Matthew Ranostay <mranostay@embeddedalley.com>
Cc: alsa-devel@alsa-project.org, tim.gardner@canonical.com, "Tellman,
	Steven" <Steven.Tellman@idt.com>,
	Mario Limonciello <mario_limonciello@dell.com>
Subject: Re: [PATCH] hda: make a STAC_DELL_EQ option
Date: Mon, 03 Nov 2008 14:28:26 +0100	[thread overview]
Message-ID: <s5hk5bl7xc5.wl%tiwai@suse.de> (raw)
In-Reply-To: <490EFC0F.1030903@embeddedalley.com>

At Mon, 03 Nov 2008 08:26:39 -0500,
Matthew Ranostay wrote:
> 
> Takashi Iwai wrote:
> > At Mon, 03 Nov 2008 08:12:43 -0500,
> > Matthew Ranostay wrote:
> >> Add support for explicitly enabling the EQ distortion hack for
> >> systems without software biquad support.
> >>
> >> Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
> > 
> > Is it to be merged to 2.6.28, right?
> That be best if we are still in that time window.

Sure, such a trivial fix *must* go in.

> > How about the older kernels?  To be sent to stable@kernel as well?
> > 
> Yeah this would good as well. Should I forward it?

We can just 'Cc: stable@kernel.org' in the patch comment.
Then stable guys will pick it up automatically when committed to the
upstream.


thanks,

Takashi

> 
> > 
> > thanks,
> > 
> > Takashi
> > 
> >> ---
> >>
> >> diff --git a/pci/hda/patch_sigmatel.c b/pci/hda/patch_sigmatel.c
> >> index c2f900f..2c0f37f 100644
> >> --- a/pci/hda/patch_sigmatel.c
> >> +++ b/pci/hda/patch_sigmatel.c
> >> @@ -70,6 +70,7 @@ enum {
> >>  enum {
> >>  	STAC_92HD73XX_REF,
> >>  	STAC_DELL_M6,
> >> +	STAC_DELL_EQ,
> >>  	STAC_92HD73XX_MODELS
> >>  };
> >>
> >> @@ -792,9 +793,7 @@ static struct hda_verb dell_eq_core_init[] = {
> >>  };
> >>
> >>  static struct hda_verb dell_m6_core_init[] = {
> >> -	/* set master volume to max value without distortion
> >> -	 * and direct control */
> >> -	{ 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xec},
> >> +	{ 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
> >>  	/* setup audio connections */
> >>  	{ 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00},
> >>  	{ 0x0a, AC_VERB_SET_CONNECT_SEL, 0x01},
> >> @@ -1622,11 +1621,13 @@ static unsigned int dell_m6_pin_configs[13] = {
> >>  static unsigned int *stac92hd73xx_brd_tbl[STAC_92HD73XX_MODELS] = {
> >>  	[STAC_92HD73XX_REF]	= ref92hd73xx_pin_configs,
> >>  	[STAC_DELL_M6]	= dell_m6_pin_configs,
> >> +	[STAC_DELL_EQ]	= dell_m6_pin_configs,
> >>  };
> >>
> >>  static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = {
> >>  	[STAC_92HD73XX_REF] = "ref",
> >>  	[STAC_DELL_M6] = "dell-m6",
> >> +	[STAC_DELL_EQ] = "dell-eq",
> >>  };
> >>
> >>  static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = {
> >> @@ -4274,12 +4275,17 @@ again:
> >>  			sizeof(stac92hd73xx_dmux));
> >>
> >>  	switch (spec->board_config) {
> >> -	case STAC_DELL_M6:
> >> +	case STAC_DELL_EQ:
> >>  		spec->init = dell_eq_core_init;
> >> +		/* fallthru */
> >> +	case STAC_DELL_M6:
> >>  		spec->num_smuxes = 0;
> >>  		spec->mixer = &stac92hd73xx_6ch_mixer[DELL_M6_MIXER];
> >>  		spec->amp_nids = &stac92hd73xx_amp_nids[DELL_M6_AMP];
> >>  		spec->num_amps = 1;
> >> +
> >> +		if (!spec->init)
> >> +			spec->init = dell_m6_core_init;
> >>  		switch (codec->subsystem_id) {
> >>  		case 0x1028025e: /* Analog Mics */
> >>  		case 0x1028025f:
> >> @@ -4289,8 +4295,6 @@ again:
> >>  			break;
> >>  		case 0x10280271: /* Digital Mics */
> >>  		case 0x10280272:
> >> -			spec->init = dell_m6_core_init;
> >> -			/* fall-through */
> >>  		case 0x10280254:
> >>  		case 0x10280255:
> >>  			stac92xx_set_config_reg(codec, 0x13, 0x90A60160);
> >>
> > 
> 

      reply	other threads:[~2008-11-03 13:28 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-11-03 13:12 [PATCH] hda: make a STAC_DELL_EQ option Matthew Ranostay
2008-11-03 13:17 ` Takashi Iwai
2008-11-03 13:26   ` Matthew Ranostay
2008-11-03 13:28     ` Takashi Iwai [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5hk5bl7xc5.wl%tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=Steven.Tellman@idt.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=mario_limonciello@dell.com \
    --cc=mranostay@embeddedalley.com \
    --cc=tim.gardner@canonical.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox